Introduction
Thank you for choosing the Intelamp YL005-13P10 High Power 3000LM Solar Light. This solar-powered lamp is designed for outdoor use, featuring a motion sensor, remote control, and a waterproof construction. It provides bright, efficient lighting for various outdoor spaces such as yards, streets, walls, and garages. This manual provides essential information for the safe and effective use of your solar light.

Figure 1: Intelamp YL005-13P10 Solar Light in an outdoor setting.
Setup and Installation
The Intelamp YL005-13P10 solar light is designed for easy, self-contained installation, requiring no professional electrician. It can be mounted on a wall or a pole.
Package Contents
- Solar Light Unit
- Mounting Bracket
- Installation Accessories (screws, nuts, washers)
- Remote Control
- Instruction Manual
Installation Steps
- Choose a Location: Select a location that receives direct sunlight for at least 5-6 hours daily to ensure optimal charging of the solar panel. Ensure the area to be illuminated is within the light's range.
- Mark Drilling Points: Position the mounting bracket on the desired surface (wall or pole) and use a marker to indicate the drilling points.
- Drill Holes: Drill holes at the marked points.
- Insert Expansion Screws: Insert the expansion screws into the drilled holes.
- Attach Mounting Bracket: Secure the mounting bracket to the wall or pole using the provided screws and nuts.
- Attach Solar Light: Mount the solar light unit onto the bracket and fasten it securely.

Figure 2: Installation process for the solar light.

Figure 3: Wall Mount and Pole Mount options.
Video 1: Product overview and installation guide.
Operating Instructions
The solar light operates automatically, charging during the day and turning on at night. It features intelligent motion sensing and can be controlled via the included remote.
Automatic Operation
- Daytime: The solar panel converts sunlight into electricity and stores it in the internal battery. The light remains off.
- Nighttime: The light automatically turns on at dusk, providing 3000LM of illumination.

Figure 4: Automatic charging and illumination cycle.
Remote Control Functions
Use the remote control to adjust settings:

Figure 5: Remote control functions.
- ON/OFF: Turns the light on or off. Remote-off interrupts night auto-lighting. Remote on again to turn it back on.
- Sensor Mode: Adjusts the duration of high brightness after motion detection. Options include 30 seconds, 3 minutes, or 10 minutes. The light dims or turns off when no motion is detected.
- Lighting Mode: Sets the automatic illumination duration at night. Options include 2 hours, +1 hour (adds 1 hour to current setting), or 6 hours. The light dims or turns off after the programmed lighting period.
- Bright Adjustment: Adjusts the brightness level to 60%, 80%, or 100%.
Intelligent Mutual Control and Sensing
The solar light features intelligent mutual control. When one Intelamp solar light detects motion and activates, it sends a signal to other Intelamp solar lights within a 30-meter (66-foot) radius, causing them to illuminate simultaneously. This creates a connected lighting system, illuminating your path in advance.

Figure 6: Intelligent mutual control in action.

Figure 7: Motion sensor detection range.
Maintenance
To ensure optimal performance and longevity of your Intelamp solar light, follow these maintenance guidelines:
- Solar Panel Cleaning: Regularly clean the solar panel surface to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient charging.
- Placement: Ensure the solar panel remains unobstructed by trees, buildings, or other objects that could cast shadows, especially during peak sunlight hours.
- Battery Longevity: The unique partition design within the lamp helps reduce the degradation of batteries and LEDs caused by high temperatures, contributing to an extended lifespan.
- Weather Resistance: The light has an IP65 waterproof rating, making it resistant to rain, snow, and frost. However, extreme weather conditions may temporarily affect performance.

Figure 8: IP65 Waterproof performance in different weather.

Figure 9: Internal design for extended lifespan.
Troubleshooting
If your solar light is not functioning as expected, please refer to the following common issues and solutions:
- Light does not turn on at night:
- Ensure the solar panel is clean and receiving direct sunlight for at least 5-6 hours during the day.
- Verify that the light is switched ON using the remote control.
- Check if the remote control battery needs replacement.
- Light is dim or does not last long:
- The solar panel may not be receiving enough direct sunlight. Relocate the light to a sunnier spot if possible.
- Ensure the solar panel is clean.
- The battery may not be fully charged due to insufficient sunlight over several days. Allow several sunny days for a full charge.
- Motion sensor is not detecting:
- Ensure the sensor is clean and unobstructed.
- Check the remote control settings for sensor mode duration.
- Verify the light is installed within the recommended motion detection range (up to 30 meters for mutual control, 8 meters for direct activation).
- Lights are not mutually controlling:
- Ensure all Intelamp solar lights are within a 30-meter (66-foot) radius of each other.
- Verify that all lights are powered on and functioning individually.
Specifications

Figure 10: Key product specifications.
| Feature | Specification |
|---|---|
| Brand Name | intelamp |
| Model Number | YL005-13P10 |
| Power Source | Solar |
| Voltage | 5V |
| Light Source | LED bulbs (109 high-efficiency 5730 LEDs) |
| Brightness | 3000LM |
| Color Temperature | 6500K |
| Battery Type | 3.2V/12500mAh Lithium Battery |
| Solar Panel | TOPCon 3rd generation components, 24%+ charging efficiency, 5V/2600mAh |
| Charging Time | 5-6 hours (under intense sunlight) |
| Illumination Angle | 240° (dual wide-angle illumination faces) |
| Motion Sensors | 2 sensors |
| Motion Detection Range | Up to 30m (66ft) for mutual control, 8m (26ft) for direct activation |
| Protection Level | IP65 (Waterproof) |
| Body Material | ABS |
| Style | Modern Style |
| Warranty | 2 Years |
| Batteries Included | Yes (integrated) |
| Bulbs Included | No (LEDs are integrated, not replaceable bulbs) |
| Dimmable | Yes |
| Installation Method | Self-contained (Wall Mount, Pole Mount) |
| Package Dimensions | 39cm (L) x 26cm (W) x 9cm (H) |
| Package Weight | 3.0 kg |
| Origin | Mainland China |
| Certification | LVD, GS, FCC, UL, ROHS, CE |

Figure 11: Product dimensions.
User Tips
- Optimal Placement: For best performance, install the solar light in an area that receives maximum direct sunlight throughout the day. This ensures the battery charges fully and provides consistent illumination at night.
- Linked Lighting System: Consider purchasing multiple Intelamp solar lights to take full advantage of the intelligent mutual control feature. Installing them within 30 meters of each other will create a seamless, interconnected lighting system for larger areas.
- Quantity Check: When ordering, double-check the quantity to ensure you receive the desired number of units for your lighting needs.
Warranty and Support
The Intelamp YL005-13P10 Solar Light comes with a 2-year warranty from the date of purchase.
For any technical assistance, warranty claims, or product-related inquiries, please contact the seller or manufacturer directly through your purchase platform. Provide your order details and a clear description of the issue to facilitate prompt support.