1. Introduction
Thank you for choosing the intelamp YL005-13P10 High Power Solar LED Light. This product is designed to provide efficient, bright, and reliable outdoor illumination using solar energy. Featuring intelligent motion sensing, a long-life battery, and durable IP65 waterproof construction, it is ideal for various outdoor applications such as gardens, streets, walls, and other areas requiring robust lighting. This manual provides essential information for the safe and effective installation, operation, and maintenance of your solar light.

Figure 1: intelamp YL005-13P10 High Power Solar LED Light
2. Specifications
| Attribute | Value |
|---|---|
| Model Number | YL005-13P10 |
| Brand Name | intelamp |
| Power Source | Solar |
| Voltage | 5V |
| Light Source | LED bulbs (SMD 5730) |
| Luminosity | 3000LM |
| Color Temperature | 6500K |
| Solar Cell Type | Lithium Battery (3.2V/12500mAh) |
| Solar Panel Efficiency | 24%+ (TOPCon 3rd generation components) |
| Is Dimmable | Yes |
| Is Batteries Included | Yes |
| Is Bulbs Included | No (LEDs are integrated) |
| Protection Level | IP65 |
| Body Material | ABS |
| Installation Method | Self-contained (Wall Mount, Pole Mount) |
| Motion Sensors | 2 sensors, 180° wide angle |
| Motion Detection Range | Up to 100ft (30m) |
| Warranty | 2 Years |

Figure 2: Key Product Features

Figure 3: Product Dimensions
3. Package Contents
The intelamp YL005-13P10 solar light package includes all necessary components for installation and operation.
- Solar LED Light Unit with integrated solar panel
- Mounting Bracket (Stainless Steel)
- Installation Accessories (screws, wall anchors, nuts, washers)
- Remote Control
- Instruction Manual (this document)
4. Setup and Installation
The intelamp solar light is designed for easy, self-contained installation, requiring no professional electrician. It can be mounted on a wall or a pole.
4.1 Choosing an Installation Location
Select a location that receives direct sunlight for at least 5-6 hours daily to ensure optimal charging of the solar panel. Avoid areas shaded by trees, buildings, or other obstructions. Ensure the light can illuminate the desired area effectively.

Figure 4: Installation Options (Wall Mount and Pole Mount)
4.2 Installation Steps
- **Assemble the Bracket:** Attach the mounting bracket to the solar light unit using the provided screws, nuts, and washers. Ensure all connections are firm and reliable.
- **Mark Drill Holes:** Hold the assembled light and bracket against the desired installation surface (wall or pole). Use a marker to precisely mark the positions for drilling holes through the bracket's mounting points.
- **Drill Holes:** Using an appropriate drill bit for your surface, drill holes at the marked positions.
- **Insert Wall Anchors:** For wall installations, insert the provided wall anchors into the drilled holes.
- **Secure the Bracket:** Align the bracket with the drilled holes and secure it firmly using the provided screws.
- **Final Adjustment:** Ensure the solar panel is angled to receive maximum sunlight throughout the day.
Video 1: Installation Guide and Feature Demonstration
5. Operating Instructions
Your intelamp solar light operates automatically, charging during the day and illuminating at night. The included remote control allows for customization of lighting modes and brightness.
5.1 Automatic Operation
- **Daytime Charging:** The solar panel will automatically charge the internal lithium battery when exposed to sunlight. A full charge typically takes 5-6 hours under intense sunlight.
- **Nighttime Illumination:** The light will automatically turn on at dusk.

Figure 5: Daytime Charging and Nighttime Illumination
5.2 Remote Control Functions
Use the provided remote control to adjust the light's settings:
- **ON/OFF:**
- **OFF:** Remote-off interrupts night auto-lighting.
- **ON:** Remote on again to turn it back on.
- **Sensor Mode:**
- **30s / 3m / 10m:** Sets the high brightness time after motion induction.
- **Dim / Off:** The light dims or turns off when there is no one in the detection area.
- **Lighting Mode:**
- **2H / +1H / 6H:** Automatically lights up for the programmed duration (2, 3, or 6 hours) at night.
- **Dim / Off:** The light dims or turns off after the programmed lighting duration.
- **Bright Adjustment:** Adjust brightness to 60%, 80%, or 100%.

Figure 6: Remote Control Functions
5.3 Motion Sensing and Mutual Control
The intelamp solar light features two motion sensors with a 180° wide-angle detection, significantly enhancing sensitivity.
- **Detection Range:** Motion can be detected up to 100ft (30m).
- **Mutual Control:** When one intelamp solar light is activated by motion, it emits a signal that triggers all other intelamp solar lights within a 66ft (20m) radius to illuminate simultaneously. This creates a continuous path of light.

Figure 7: Motion Sensor Range and Mutual Control
6. Maintenance
To ensure optimal performance and longevity of your intelamp solar light, follow these maintenance guidelines:
- **Clean Solar Panel:** Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- **Check for Obstructions:** Periodically check that no new obstructions (e.g., growing branches, new structures) are shading the solar panel.
- **Inspect for Damage:** Inspect the light and mounting bracket for any signs of physical damage or loose connections. The corrosion-resistant ABS body and stainless steel bracket are designed for durability.
- **Weather Resistance:** The light is IP65 waterproof, meaning it is protected against dust and water jets. It is designed to work well in various weather conditions including rain, snow, and frost.

Figure 8: IP65 Waterproof Performance in Various Weather Conditions

Figure 9: Internal Design for Enhanced Durability and Performance
7. Troubleshooting
If you encounter issues with your intelamp solar light, please refer to the following common problems and solutions:
- **Light does not turn on at night:**
- Ensure the solar panel is receiving adequate direct sunlight during the day (at least 5-6 hours).
- Check if the remote control has been set to "OFF". Press "ON" to reactivate.
- Verify there are no external light sources (e.g., streetlights, other outdoor lights) directly illuminating the solar panel at night, which might prevent it from activating.
- The battery might be depleted. Allow several sunny days for a full charge.
- **Light is dim or only stays on for a short period:**
- The solar panel may not be receiving enough sunlight. Clean the panel and reposition if necessary.
- Battery charge might be low due to prolonged cloudy weather or insufficient charging time.
- Check remote control settings for brightness level (60%, 80%, 100%) and lighting duration (2H, +1H, 6H).
- **Motion sensor is not working or is too sensitive:**
- Ensure the sensor is not obstructed.
- Adjust the sensor mode settings on the remote control (30s, 3m, 10m) to fine-tune sensitivity and duration.
- Environmental factors like extreme temperature changes can sometimes affect sensor performance.
8. User Tips
- For optimal performance, install the solar light in an area that receives maximum direct sunlight throughout the day.
- Utilize the mutual control feature by installing multiple intelamp solar lights within 66ft (20m) of each other to create a seamlessly lit pathway or area.
- Experiment with different sensor and lighting modes using the remote control to find the best settings for your specific needs and environment.
- Regular cleaning of the solar panel is crucial for maintaining charging efficiency, especially in dusty or snowy conditions.
9. Warranty and Support
The intelamp YL005-13P10 Solar LED Light comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact intelamp customer service through your original point of purchase or visit the official intelamp website for contact information. Please have your model number (YL005-13P10) and proof of purchase ready when contacting support.