1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kechuangqi 350W 36V 15A Scooter Controller. This controller is specifically designed for 8.5-inch electric scooters and features Bluetooth connectivity for APP control, enhancing your riding experience with advanced settings and monitoring capabilities. Please read this manual thoroughly before use to ensure proper function and safety.
Important: This controller only supports 8.5-inch scooters.
2. Specifications
| Parameter | Value |
|---|---|
| Voltage | DC36V |
| Rated Power | 350W |
| Undervoltage Protection | 30V |
| Current | 15A (Upgraded for more power) |
| Max Speed | 30 km/h |
| Package Length | 20 cm |
| Package Width | 15 cm |
| Package Height | 10 cm |
| Package Weight | 0.57 kg |
3. Package Contents
The package may vary slightly depending on the specific kit purchased (e.g., 3PCS, 7PCS, 8PCS, 9PCS Pro-APP KCQ). A typical kit includes:
- Controller
- Dashboard
- Communication Line
- Headlight
- Accelerator
- Taillight
- Brake Lever
- APP QR Code (for application download)
- Dashboard Screen (if separate from dashboard)
- Waterproof Cover (for dashboard screen)


4. Installation and Wiring
Carefully follow the wiring diagrams to connect the controller and other components to your 8.5-inch scooter. Ensure all connections are secure before powering on the device.
4.1. Controller Connections

4.2. Dashboard Connections

4.3. Motor Wiring Adjustment
If you experience issues like motor noise, vibration, or reversal, you may need to adjust the motor's Hall line and phase line connections. Refer to the diagram below for troubleshooting.

4.4. Self-Learning Function
For optimal motor parameter configuration:
- Power on the scooter for the first time.
- Run the no-load speed regulation to the highest speed.
- Keep the accelerator handle fully engaged for 3 seconds.
- Release the handle until the motor drives.
- After the motor stops, shut down the scooter. The motor parameters will be automatically learned and saved.

5. Operation
5.1. Power On/Off
- Power On: Short press the power button for 0.5 seconds.
- Power Off: Long press the power button for 2 seconds.
5.2. Cycling Mode
The controller uses a Non-zero start-up mode. This means the scooter will only start when it reaches a gliding speed of 3 km/h, after which you can press the accelerator to engage the motor.
5.3. Speed Gears
The controller offers different speed gears:
- D Gear: Up to 20 km/h (13 MPH)
- S Gear: Up to 25 km/h (16 MPH)
The controller has a memory function and will default to the last used gear before shutdown.
Speed Limit Lifted (if applicable via APP)
- E Gear: Up to 15 km/h (9 MPH)
- D Gear: Up to 25 km/h (16 MPH)
- S Gear: Up to 32 km/h (20 MPH)
5.4. Brake Method
The scooter utilizes a Hall electronic brake system.
5.5. Tail Lights
The tail lights illuminate when the scooter's lights are turned on and will flicker when the brakes are applied.
5.6. Cruise Control Mode
If the cruise control function is enabled in the APP:
- While riding, if the speed remains stable for 6-8 seconds, the scooter will automatically enter cruise control mode.
- To exit cruise control, press the brake, press the accelerator, or switch gears.
If the cruise control function is not enabled in the APP, this feature will not be active.
6. APP Features and Settings
The controller supports a mobile application for enhanced control and customization. Scan the provided QR code to download the official APP.

6.1. APP Settings Overview
The APP allows you to configure various parameters:
- Personal Center: User-specific information.
- Serial Number: View the device's serial number.
- Modify Bluetooth Name: Customize the Bluetooth name of your scooter.
- Unit Setting: Switch between mph and km/h.
- Tail Light: Toggle tail light functionality (ON/OFF).
- Start Mode: Select between 'Zero start' (immediate acceleration from standstill) or 'Non-zero start' (requires initial push).
- Fixed Speed Cruise: Enable or disable cruise control (ON/OFF).
- Connection Password: Set a password for Bluetooth connection (ON/OFF).
- User Manual: Access the digital user manual.
- Troubleshooting: Access troubleshooting guides.
- About Us: Information about the manufacturer/app.
- Reset: Reset settings to default.
- User Agreement & Privacy Agreement: Legal documents.

6.2. Restore Factory Settings
To restore the controller to its factory default settings:
- Press and hold both the brake and accelerator simultaneously.
- Click the power button 8 consecutive times.
- Continue holding the brake and accelerator until the scooter automatically shuts down.
- Release the brake and accelerator.
- The factory settings will be restored upon the next boot-up.
7. Troubleshooting
If you encounter any issues, refer to the error codes displayed on your dashboard and the corresponding solutions below.
| Error Code | Description | Solution |
|---|---|---|
| E1 | Motor Hall failure | Motor Hall is damaged. Replace the motor. |
| E2 | MOS tube failure | 1. Check if motor phase wires are short-circuited or damaged; replace motor if necessary. 2. Replace the controller if internal components are damaged. |
| E3 | Brake failure | 1. Replace the brake lever if damaged. 2. Ensure the brake lever returns to its original position before starting. If error persists, replace the brake lever. |
| E4 | Handlebar (accelerator) failure | 1. Replace the speed control handle if damaged. 2. Ensure the speed control handle returns to its original position. If error persists, replace the speed control handle. |
| E5 | Undervoltage protection | The supply voltage is below the controller's minimum. Charge or replace the battery. |
| E6 | Controller/instrument communication failure | 1. Check if the communication line is properly connected. 2. Check if the motor phase line or Hall line is damaged or leaking. 3. Replace the motor. |
| E7 | Overvoltage protection | The power supply voltage is above the controller's maximum. Replace the battery or motor phase wire that matches the controller's voltage. |
| E9 | Blockage fault | Check for any physical obstructions preventing motor rotation. Inspect motor and wheel for damage. |
8. User Tips
- Always ensure all wiring connections are tight and properly insulated to prevent short circuits or water damage.
- Regularly check the battery charge to avoid undervoltage protection errors (E5).
- Familiarize yourself with the 'Zero start' and 'Non-zero start' modes in the app to choose the one that best suits your riding style and safety preferences.
- If experiencing motor issues, carefully follow the Hall and phase line adjustment procedures as shown in the installation section before considering component replacement.
- Keep the APP updated to ensure access to the latest features and bug fixes.
9. Maintenance
Proper maintenance ensures the longevity and safe operation of your scooter controller.
- Regular Inspection: Periodically check all wires and connectors for signs of wear, damage, or loose connections.
- Cleanliness: Keep the controller and dashboard free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning.
- Avoid Water Damage: The controller is sensitive to water. Ensure all components are properly sealed and avoid riding in heavy rain or through deep puddles.
- Battery Care: Follow the manufacturer's guidelines for battery charging and storage to prevent issues like undervoltage.
- Software Updates: Keep the associated mobile application updated to benefit from performance improvements and new features.
Note: The warranty typically does not cover water damage or wire damage.
10. Warranty and Support
This electric scooter controller is CE certified, indicating compliance with relevant European safety, health, and environmental protection requirements.

For specific warranty details, including coverage period and terms, please refer to the documentation provided at the time of purchase or contact your seller directly. As noted, the warranty typically does not cover water damage or wire damage resulting from improper installation or use.
For technical support or further assistance, please contact the seller or manufacturer through the contact information provided with your purchase.