XINYI Sini Audio XY-C50L

Contents

XINYI Sini Audio Stereo Bluetooth Digital Amplifier Board User Manual

Model: XY-C50L

Brand: XINYI Sini Audio

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your XINYI Sini Audio Stereo Bluetooth Digital Amplifier Board. This module is designed for easy integration into various audio systems, offering 50W dual-channel output with Bluetooth connectivity and 360-degree infinite tuning. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Package Contents

Please check the package for the following items:

  • XINYI Sini Audio Stereo Bluetooth Digital Amplifier Board (Model XY-C50L)
  • Top Plate
  • Volume Knob
  • Heatsink
  • Screws
  • Standoffs
  • DC Power Jack
All components of the XINYI Sini Audio amplifier board laid out, including the main board, top plate, volume knob, heatsink, screws, standoffs, and DC power jack.
Figure 2.1: Included Components

3. Specifications

Feature Specification
Model XY-C50L
Type Module
Output Power 50W (Dual Channel)
Connectivity Bluetooth, AUX IN, USB Audio
Input Voltage DC 8-24V
Dimensions (L x W) 56mm x 50mm
Tuning 360-degree Infinite Volume Tuning
Top-down view of the XY-C50L amplifier board showing its dimensions as 56mm in length and 50mm in width. Key components like DC input, speaker terminals, AUX IN, USB Audio, Bluetooth antenna, and volume knob are visible.
Figure 3.1: Amplifier Board Dimensions and Layout

4. Setup Instructions

Follow these steps to set up your amplifier board:

  1. Mounting (Optional): If desired, use the provided standoffs and screws to mount the amplifier board securely within your audio enclosure.
  2. Connect Speakers: Connect your passive speakers to the output terminals. Ensure correct polarity: Left speaker to L+ and L- terminals, Right speaker to R+ and R- terminals.
  3. Connect Audio Source:
    • AUX IN: Connect an audio device (e.g., smartphone, MP3 player) using a 3.5mm audio cable to the AUX IN port.
    • USB Audio: Connect a computer or other USB audio source to the USB Audio port using a USB cable.
  4. Connect Power Supply: Connect a DC power supply (8-24V) to the DC power jack. Ensure the power supply is within the specified voltage range to prevent damage.
  5. Attach Volume Knob: Carefully push the volume knob onto the potentiometer shaft.
Assembled XINYI Sini Audio amplifier board with a DC power jack connected, showing the layout of input and output ports, and the volume knob.
Figure 4.1: Amplifier Board with Power Connected

5. Operating Instructions

  1. Power On: Once all connections are made, connect the DC power supply to a power outlet. The board will power on automatically.
  2. Bluetooth Pairing:
    • Ensure the amplifier board is powered on.
    • On your audio device (e.g., smartphone), search for Bluetooth devices.
    • Select the amplifier board (usually named 'BT-WUZHI' or similar) from the list of available devices to pair.
    • Once paired, audio from your device will be streamed to the amplifier.
  3. AUX Input: If using the AUX IN, ensure no Bluetooth device is actively connected. The amplifier will automatically switch to the AUX input when a cable is inserted.
  4. USB Audio: If using USB Audio, ensure no Bluetooth or AUX device is actively connected. The amplifier should be recognized as an audio output device by your computer.
  5. Volume Control: Use the physical volume knob on the board to adjust the output volume. The 360-degree infinite tuning allows for precise volume adjustments.

6. Maintenance

  • Keep the amplifier board dry and away from moisture.
  • Clean the board with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Avoid exposing the board to extreme temperatures or direct sunlight.
  • Ensure proper ventilation, especially during prolonged high-power operation, to prevent overheating. The included heatsink should be properly installed.

7. Troubleshooting

No Sound Output:
Check if the power supply is correctly connected and providing the specified voltage (DC 8-24V). Verify that speakers are properly connected to the L+/L- and R+/R- terminals with correct polarity. Ensure the audio source is playing and the volume knob is turned up. Try switching between input modes (Bluetooth, AUX, USB Audio).
Bluetooth Not Connecting/Pairing:
Ensure the amplifier board is powered on. Make sure your audio device's Bluetooth is enabled and in pairing mode. Check if the amplifier is already paired with another device; disconnect from other devices if necessary. Ensure your device is within Bluetooth range.
Distorted Sound:
Check the input audio level from your source; too high a level can cause distortion. Ensure your speakers' impedance matches the amplifier's requirements. Verify the power supply is stable and sufficient for the desired output power. Reduce the volume to see if distortion persists.
Board Overheating:
Ensure the heatsink is properly installed. Provide adequate ventilation around the board. Reduce the output volume or operating time if overheating occurs frequently.

8. User Tips

  • For best audio quality, use a high-quality, stable DC power supply within the 8-24V range.
  • Always double-check speaker wiring polarity (+ to + and - to -) to ensure optimal stereo imaging and sound reproduction.
  • When using the AUX input, ensure the 3.5mm jack is fully inserted to avoid intermittent audio or channel issues.
  • If experiencing interference, try to keep the amplifier board away from other electronic devices that might emit electromagnetic noise.

9. Warranty and Support

For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2024 XINYI Sini Audio. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.