1. Introduction
Thank you for choosing the Heimerdinger LB155 Cordless Electric Pruning Shears. This powerful and efficient tool is designed for effortless pruning of branches up to 40mm in diameter, making gardening tasks easier and faster. Featuring a brushless motor, high bite force, and a digital display, it offers precision and convenience for both professional and home use. Please read this manual thoroughly before operation to ensure safe and effective use of your new pruning shears.
2. Safety Information
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
General Safety Warnings:
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety:
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Personal Safety:
- Always wear eye protection and appropriate personal protective equipment (PPE) such as gloves, non-skid safety shoes, and hearing protection when operating the pruning shears.
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Power Tool Use and Care:
- Do not force the power tool. Use the correct power tool for your application.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Battery Tool Use and Care:
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
3. Package Contents
The Heimerdinger LB155 Pruning Shears are available in several configurations. Please verify the contents of your package against the option you purchased:
Option 1: Tool Only
Includes: Brushless Pruning Shear

Image: Pruning shears only (No battery, No charger)
Option 2: Basic Kit (1x 2A Battery)
Includes: Brushless Pruning Shear, One 18V 2A battery, One charger

Image: Pruning shears with one 18V 2A battery and one charger
Option 3: Standard Kit (1x 4A Battery)
Includes: Brushless Pruning Shear, One 18V 4A battery, One charger

Image: Pruning shears with one 18V 4A battery and one charger
Option 4: Extended Kit (1x 6A Battery)
Includes: Brushless Pruning Shear, One 18V 6A battery, One charger

Image: Pruning shears with one 18V 6A battery and one charger
Option 5: Dual Battery Kit (2x 2A Batteries)
Includes: Brushless Pruning Shear, Two 18V 2A batteries, One charger

Image: Pruning shears with two 18V 2A batteries and one charger
Option 6: Dual Battery Kit (2x 4A Batteries)
Includes: Brushless Pruning Shear, Two 18V 4A batteries, One charger

Image: Pruning shears with two 18V 4A batteries and one charger
Option 7: Dual Battery Kit (2x 6A Batteries)
Includes: Brushless Pruning Shear, Two 18V 6A batteries, One charger

Image: Pruning shears with two 18V 6A batteries and one charger
Option 8: Basic Kit with Case (1x 2A Battery)
Includes: Brushless Pruning Shear, One 18V 2A battery, One charger, One suitcase

Image: Pruning shears with one 18V 2A battery, one charger, and one suitcase
Option 9: Standard Kit with Case (1x 4A Battery)
Includes: Brushless Pruning Shear, One 18V 4A battery, One charger, One suitcase

Image: Pruning shears with one 18V 4A battery, one charger, and one suitcase
Option 10: Extended Kit with Case (1x 6A Battery)
Includes: Brushless Pruning Shear, One 18V 6A battery, One charger, One suitcase

Image: Pruning shears with one 18V 6A battery, one charger, and one suitcase
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | LB155 |
| Motor Type | Brushless motor |
| Rated Power | 300W |
| Bite Force | 1.8 tons |
| Maximum Cutting Diameter | 40MM |
| Motor Speed | 19800 RPM |
| Net Weight (Tool Only) | 913g |
| Blade Material | Aluminium Alloy (SK5 blade) |
| Power Source | Battery |
| Rated Voltage | 18V |
| Battery Compatibility | Compatible with Makita 18V B series lithium batteries (e.g., BL1850B, BL1840B, BL1830B, BL1430B, BL1820B, BL1850, BL1840, BL1440, BL1415, BL1815N). NOT compatible with G Series (e.g., BL1813G, BL1413G, BL1415G, BL1430G, BL1815G) or 18V Ni-CD batteries (e.g., 1822). |
| Dimensions (approx.) | 8.0cm (W) x 12.0cm (D) x 29.0cm (H) |

Image: Heimerdinger LB155 Pruning Shears with approximate dimensions.
5. Setup
5.1 Battery Installation
- Ensure the pruning shears are turned off and the safety switch is engaged.
- Align the battery pack with the battery port at the base of the pruning shears.
- Slide the battery pack into the port until it clicks securely into place.
- To remove the battery, press the release button on the battery pack and slide it out.
Video: Product demonstration showing battery installation and pruning in action.
5.2 Activating the Pruning Shears (Double Protection Switch)
The pruning shears feature a double protection switch to prevent accidental operation. Follow these steps to activate the tool:
- Press and hold the power button until you hear a "beep" sound.
- Pull the trigger three times in a row.
- The blades will open, and the machine is now active and ready for use.
- When the machine is not in use for a long time, the intelligent adjustment state stops to ensure safety.

Image: Step-by-step guide for activating the double protection switch.
6. Operating Instructions
6.1 General Operation
- Once activated, the blades will be open. Position the branch to be cut between the movable and fixed blades.
- Pull the trigger to close the blades and cut the branch. Release the trigger to open the blades.
- The pruning shears can easily handle branches ranging from 1mm to 40mm in diameter.

Image: Close-up view of the movable and fixed blades.

Image: Collage showing various types of branches and plants that can be pruned with the shears.
6.2 Digital Display
The pruning shears are equipped with an HD digital display that provides real-time information:
- Power Display: Shows the remaining battery level, allowing you to know the power status at any time.
- Cutting Number: Displays the count of cuts made, useful for tracking usage.

Image: Digital display on the pruning shears showing battery level and cutting number.
7. Maintenance
7.1 Blade Care
- The SK5 blades are designed for sharpness and durability, ensuring clean cuts.
- Regularly clean the blades after each use to remove sap, debris, and moisture. Use a damp cloth and mild detergent if necessary, then dry thoroughly.
- Periodically apply a light coat of oil to the blades to prevent rust and ensure smooth operation.
- Inspect blades for sharpness. If they become dull, consider professional sharpening or replacement to maintain optimal performance and prevent damage to plants.

Image: Pruning shears in action, illustrating the benefits of sharp, durable, and clean cutting.
7.2 General Cleaning and Storage
- Clean the body of the pruning shears with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the tool is completely dry before storing.
- Store the pruning shears in a dry, secure place, out of reach of children and away from direct sunlight or extreme temperatures. If your kit includes a suitcase, use it for storage.
- Remove the battery pack from the tool when storing for extended periods.
7.3 Battery Charging
- Use only the charger provided or recommended by the manufacturer for your 18V Makita-compatible batteries.
- Charge batteries in a well-ventilated area.
- Do not charge damaged batteries.
- Refer to your battery and charger manuals for specific charging instructions and safety precautions.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shears do not turn on. | Battery not installed correctly or discharged. Safety activation sequence not followed. | Ensure battery is fully charged and properly seated. Follow the double protection switch activation steps (Section 5.2). |
| Blades are not cutting cleanly or are stuck. | Blades are dull, dirty, or damaged. Attempting to cut branches exceeding maximum diameter. | Clean and lubricate blades. Sharpen or replace blades if dull. Do not attempt to cut branches thicker than 40mm. |
| Tool stops unexpectedly during use. | Battery is low or depleted. Overload protection activated. | Check the digital display for battery level and recharge if necessary. Reduce the load by cutting smaller branches. Allow the tool to cool down if it overheats. |
| Digital display is not working. | Loose battery connection or internal fault. | Re-seat the battery. If the issue persists, contact customer support. |
9. User Tips
- For optimal battery life and performance, always fully charge your batteries before use.
- When pruning, try to make clean cuts close to the main branch or bud to promote healthy plant growth.
- The digital display is a great feature for managing your work. Keep an eye on the battery level to avoid interruptions and the cutting count to track your progress.
- Consider having a spare charged battery on hand for longer pruning sessions, especially if you are using lower amperage batteries (e.g., 2A).
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or Heimerdinger Official Store directly. Keep your purchase receipt as proof of purchase.