1. Introduction
Thank you for choosing the VamsLuna Leg & Foot Airbag Massager. This device is designed to provide pneumatic compression massage to your calves and thighs, aiding in muscle relaxation, recovery, and improved circulation. Featuring 4 working modes and 6 air bags, it offers a customizable and effective massage experience. Please read this manual thoroughly before use to ensure safe and proper operation.
2. Important Safety Information
WARNING: To reduce the risk of electric shock, burns, fire, or injury, please observe the following precautions:
- Always unplug the device from the electrical outlet immediately after use and before cleaning.
- Do not use while bathing or in a shower.
- Do not place or store the device where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- Never use pins or other metallic fasteners with this appliance.
- Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Keep the cord away from heated surfaces.
- Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the OFF position, then remove the plug from the outlet.
- Consult your doctor before using this product if you have any medical conditions, including but not limited to: heart disease, high blood pressure, diabetes, pregnancy, or if you are using a pacemaker.
3. Package Contents
Please check the package for the following items:
- 1 x Control Unit
- 2 x Compression Boots (Left & Right)
- 2 x Air Hoses
- 1 x Y-Connector (for connecting both boots simultaneously)
- 1 x Power Adapter
- 1 x User Manual (this document)
4. Product Overview
4.1 Control Unit
The compact and lightweight control unit (approx. 1.35 kg) features a high-tech screen touch control panel for easy operation.
- Time Display: Shows remaining massage time.
- Pressure Display: Shows current pressure level.
- Working Chamber Display: Indicates which air chambers are active.
- Mode Selection: Buttons for Mode A, B, C, D.
- Chamber Selection: Buttons for Air CH1 to Air CH6 to customize active chambers.
- Start/Stop: To begin or end the massage session.
- Power Switch: Located on the side of the control unit.
4.2 Compression Boots
The boots are designed with premium materials and overlapping zones for gapless compression, ensuring an effective and comfortable massage. Each boot contains 6 individual air bags.
5. Setup Instructions
- Unpack: Carefully remove all components from the packaging.
- Connect Air Hoses: Connect the air hoses to the compression boots. Ensure a secure fit.
- Connect to Control Unit: If using one boot, connect one air hose directly to the control unit's air outlet. If using both boots, connect both air hoses to the Y-connector, then connect the Y-connector to the control unit's air outlet. The control unit features integrated hosing for a firm connection.
- Power Connection: Plug the power adapter into the control unit's power input, then plug the adapter into a suitable electrical outlet (110V~220V).
- Wear Boots: Put on the compression boots. Ensure they are comfortably zipped up and positioned correctly on your legs.
6. Operating Instructions
- Power On: Flip the power switch on the side of the control unit to the 'ON' position. The display will light up.
- Set Time: Use the time adjustment buttons (usually '+' and '-') to set your desired massage duration (0-60 minutes).
- Select Mode: Choose one of the four working modes (A, B, C, D) by pressing the corresponding mode button. Each mode offers a different compression pattern:
- Mode A: Pneumatic compression massage with individual balloon inflation/deflation (1.2.3.4.5.6 sequence).
- Mode B: Balloon sequence for all inflatable extrusion massage.
- Mode C: Sequential massage of two balloons at a time (1+2, 3+4, 5+6).
- Mode D: All 6 pneumatic bags are massaged together simultaneously.
- Adjust Pressure: Use the pressure adjustment buttons (usually '+' and '-') to set your desired pressure level. The adjustable range is 30mmHg to 260mmHg. Start with a lower pressure and gradually increase to a comfortable level.
- Select Chambers (Optional): You can select specific air chambers (Air CH1-CH6) to be active or inactive during the massage, allowing for targeted therapy.
- Start Massage: Press the 'START' button to begin the massage session.
- Stop Massage: To stop the massage at any time, press the 'STOP' button.
- Power Off: After use, turn off the control unit by flipping the power switch to 'OFF' and unplugging the power adapter from the outlet.
7. Maintenance
7.1 Cleaning
- Always unplug the device before cleaning.
- Wipe the control unit and boots with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Ensure all components are completely dry before storing or next use.
7.2 Storage
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the air hoses free from kinks or sharp bends to prevent damage.
- Store the boots flat or gently folded to maintain their shape.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power adapter not connected properly or power switch is off. | Ensure power adapter is securely plugged into both the unit and the outlet. Check if the power switch is in the 'ON' position. |
| No compression or weak compression. | Air hoses not connected securely or boots not zipped properly. | Check all air hose connections for tightness. Ensure boots are fully zipped. Increase pressure setting. |
| Unusual noise during operation. | Air leak or internal issue. | Check for any visible damage to boots or hoses. If noise persists, discontinue use and contact customer support. |
| Boots feel uncomfortable. | Pressure setting too high or boots incorrectly positioned. | Reduce pressure setting. Adjust boots for a better fit. |
If you encounter any issues not listed here or if the problem persists, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Application | Leg & Foot |
| Voltage | 110V~220V |
| Power | Approx. 29W |
| Pressure Range | 30mmHg - 260mmHg (adjustable) |
| Working Modes | 4 (A, B, C, D) |
| Air Bags per Boot | 6 |
| Control Unit Weight | Approx. 1.35 kg |
| Boot Length | 98 cm |
| Boot Max Width (Thigh) | 34 cm |
| Boot Top Circumference | 68 cm |
| Origin | Mainland China |
10. User Tips
- Start Gradually: If you are new to compression therapy, begin with shorter sessions (e.g., 15-20 minutes) and lower pressure settings. Gradually increase duration and pressure as your body adapts.
- Consistency is Key: Regular use can lead to better results for muscle recovery and circulation. Incorporate it into your routine after workouts or at the end of a long day.
- Hydration: Ensure you are well-hydrated before and after your massage session to support lymphatic drainage.
- Comfortable Attire: Wear loose, comfortable clothing or no clothing under the boots for the best experience. Avoid restrictive clothing that might impede circulation.
- Listen to Your Body: If you experience any discomfort or pain, reduce the pressure or stop the session immediately.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific warranty policy or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.