XIAOMI MJML04BY

Contents

Xiaomi Smart Doorbell 4 User Manual

Model: MJML04BY

Brand: XIAOMI

1. Introduction

The Xiaomi Smart Doorbell 4 is a high-definition wireless smart home device featuring dual lenses and infrared night vision. It integrates with the Mi Home App to provide enhanced security and convenience for your home. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.

Xiaomi Smart Doorbell 4 and its indoor receiver

Image: Xiaomi Smart Doorbell 4 and its indoor receiver.

2. Package Contents

Please check the package contents carefully. If any items are missing or damaged, please contact customer support.

  • Xiaomi Smart Doorbell 4 (Main Unit)
  • Smart Doorbell Receiver
  • Mounting Backplate
  • 3M Adhesive
  • Screws and Expansion Tubes
  • Type-C Charging Cable
  • User Manual (this document)
  • Power Adapter (may vary by region, e.g., US Plug, EU Plug, UK Plug, AU Plug)
Contents of the Xiaomi Smart Doorbell 4 package including doorbell, receiver, cables, and mounting hardware.

Image: Package contents of the Xiaomi Smart Doorbell 4.

3. Specifications

3.1. Xiaomi Smart Doorbell 4

FeatureSpecification
Product NameXiaomi Smart Doorbell 4
ModelMJML04BY
Rated Input5V=2A
Wireless ConnectionWi-Fi IEEE 802.11 b/g/n/ax 2.4GHz, Bluetooth Low Energy, 433MHz
Battery Capacity5100mAh
Storage MethodCloud storage
Working Temperature-10℃~45℃
Charging Temperature0℃~45℃
Supported SystemsAndroid 8 and iOS 12.0 and above
Execution StandardGB 4943.1-2022
State of AssemblyAlmost Ready
OriginMainland China

3.2. Smart Doorbell Receiver

FeatureSpecification
Product NameSmart Doorbell Receiver
ModelMJJSQ01BY
Rated Input100-240V~50-60Hz 0.04A
Wireless Connection433MHz
Working Temperature-10℃~45℃
Working Humidity10%-90% RH, no condensation

3.3. Hazardous Substances Information

The product contains the following hazardous substances, as per the provided information:

ComponentLead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))PBBsPBDEsDBPDIBPBBPDEHP
Metal PartsOOOOOOOOOO
Plastic PartsOOOOOOOOOO
PCB BoardXOOOOOOOOO
CablesOOOOOOOOOO
AccessoriesXOOOOOOOOO

Note 1: "O" indicates that the concentration of the hazardous substance in all homogeneous materials of the component is below the limit specified in the national standard for restricted use of hazardous substances in electrical and electronic products.
Note 2: "X" indicates that the concentration of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in the national standard for restricted use of hazardous substances in electrical and electronic products.

4. Setup and Installation

4.1. Doorbell Placement

Before permanent installation, hold the doorbell at different heights and use the Mi Home App's real-time preview to find the optimal position. The recommended installation height is between 1.4m and 1.6m, with 1.5m being ideal for capturing both the visitor's face and any packages on the ground.

Video: Xiaomi Smart Doorbell 4 Installation Guide (Chinese, but visual steps are clear).

Important: Ensure the doorbell and your Wi-Fi router are kept within 5 meters of each other, minimizing obstructions like walls for optimal signal strength.

Diagram showing recommended distance between doorbell and router, less than 5 meters.

Image: Recommended installation distance from router.

4.2. Mi Home App Connection

The Xiaomi Smart Doorbell 4 works with the Mi Home App. Before connecting, ensure your phone's Mi Home App region is set to "China Mainland".

  1. Download and install the Mi Home App by scanning the QR code on the back of the doorbell or searching "Mi Home" in your app store.
  2. Open the Mi Home App, click the "+" icon in the top right corner, and follow the on-screen instructions to add the device.
  3. Ensure your network is stable and the doorbell is powered on. The indicator light will be yellow when waiting for connection and turn blue upon successful connection.
QR code for Mi Home App connection.

Image: Mi Home App QR code for connection.

4.3. Doorbell Mounting

The doorbell can be installed using either 3M adhesive or screws. Avoid installing on metal surfaces if possible.

4.3.1. 3M Adhesive Installation

  1. Clean the installation surface thoroughly with an alcohol pad.
  2. Peel off the protective film from the 3M adhesive on the backplate.
  3. Align the backplate horizontally and press firmly against the wall for 10 seconds.
  4. Wait for 24 hours to allow the adhesive to fully cure before attaching the doorbell.
  5. Once 24 hours have passed, tilt the doorbell 30 degrees, align it with the backplate's slot, and push it down until it clicks into place.
Diagram showing doorbell installation using 3M adhesive, including cleaning, applying, and attaching the doorbell.

Image: Doorbell installation using 3M adhesive.

4.3.2. Screw Installation

  1. Use the backplate as a template to mark the drill holes on the wall.
  2. Drill holes at the marked positions and insert the expansion tubes.
  3. Align the backplate with the holes and tighten the screws using a screwdriver.
  4. Once the backplate is securely installed, tilt the doorbell 30 degrees, align it with the backplate's slot, and push it down until it clicks into place.
Diagram showing doorbell installation using screws, including drilling, inserting expansion tubes, and tightening screws.

Image: Doorbell installation using screws.

4.4. Indoor Receiver Pairing

  1. Plug the indoor receiver into a power outlet. It will emit a sound.
  2. Press the doorbell button on the main unit.
  3. The receiver will ring simultaneously, indicating successful pairing.
Screenshot from Mi Home App showing steps to connect the indoor receiver.

Image: Connecting the indoor receiver via the Mi Home App.

4.5. Installing MicroSD Card (Optional)

The doorbell supports microSD cards for local storage (16GB-256GB, Class 10 or higher recommended). However, note that the product description also mentions cloud storage as the primary method and some users report no SD card support. If your model supports it:

  1. Ensure the doorbell is powered off.
  2. Open the waterproof cover above the card slot.
  3. Insert the microSD card with the contacts facing up.
  4. After inserting, close the waterproof cover tightly to prevent water ingress.
  5. If needed, format the microSD card via the Mi Home App settings.
Diagram showing how to install a microSD card into the doorbell.

Image: MicroSD card installation diagram.

5. Operation

5.1. Power On and Indicator Status

Connect the power adapter to the doorbell and plug it into a power source. The doorbell will automatically power on. You will hear a voice prompt, and the indicator light will be solid yellow, then turn blue upon successful connection to the app.

  • Solid Yellow: Waiting for connection.
  • Flashing Yellow: Connecting to network.
  • Flashing Blue: Connecting to server.
  • Solid Blue: Connected successfully.

5.2. Key Features

  • High-Definition Dual Camera: Features a 3-megapixel main camera and a 1-megapixel secondary camera for clear, detailed views. The main camera offers a 160° wide viewing angle.
  • Infrared Night Vision: Equipped with 940nm infrared fill light for clear visibility in dark conditions without red exposure or disturbing neighbors.
  • Humanoid Detection: An infrared sensor detects human movement within 5 meters, sending notifications and video clips to your Mi Home App.
  • Two-Way Audio & Voice Changer: Communicate with visitors in real-time through the app. You can also use voice-changing options (e.g., "Primary Five", "Uncle") for privacy and safety.
  • Multi-Scene Call: View and interact with visitors via the Mi Home App even when you're not home. Customize voice replies for quick responses.
  • 72-Hour Free Cloud Storage: Automatically records and stores event videos for 72 hours, allowing easy playback and review.
  • Intelligent Voice Control: Supports voice commands (e.g., "Xiaoai Classmate") to activate the doorbell camera or check its status.
  • Anti-Lost Protection: Features a demolition alarm that triggers if the doorbell is tampered with, sending a video alert to your phone. It uses strong 3M adhesive and account binding for security.
  • Mijia Security Chip: Built-in chip with a unique key and certificate, using AES-128 encryption to protect data and privacy.
A woman using the voice changer intercom feature on her phone.

Image: Voice changer intercom feature.

Mi Home App interface displayed on a smart TV, showing real-time doorbell feed.

Image: Mi Home App integration with smart TV.

Diagram illustrating the wide coverage of the infrared motion detection sensor.

Image: Intelligent identification of people passing by.

Comparison image showing clear night vision in a dark corridor.

Image: Dark night corridor, clear view with infrared night vision.

6. Maintenance and Precautions

  • Infrared Sensor Protection: Do not scratch or touch the surface of the human body infrared sensor. Avoid contact with alcohol, chemicals, or similar substances.
  • Outdoor Use: This product is not designed for outdoor use. Liquid ingress into the doorbell's interior will cause product damage.
  • Battery Care: Long-term power depletion can damage the doorbell battery. If the doorbell will not be used for an extended period, it is recommended to fully charge the battery and then power off the device for storage.
  • Operating Environment: The product's operating temperature range is -10℃ to 45℃. Avoid using it in environments with excessively high or low temperatures.
  • Power Adapter: Use only the original power adapter provided with the device to prevent malfunctions due to insufficient power supply. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
  • Lens Care: To ensure optimal image quality, avoid placing the lens directly facing glass, white walls, or other reflective surfaces, which can cause overexposure or underexposure.
  • Night Vision Sound: When the night vision function is enabled or disabled, the camera may switch its infrared cut filter, which might produce a slight "click" sound. This is normal.
Diagram showing how to remove the doorbell for charging.

Image: Doorbell removal and charging.

7. Troubleshooting

  • Cannot connect to Mi Home App / Wi-Fi issues:
    • Ensure your Mi Home App region is set to "China Mainland" as this is the China version of the product.
    • Verify that the doorbell is within 5 meters of your Wi-Fi router and there are no significant obstructions.
    • If you change your Wi-Fi network or Mi Home App account, you must first delete the device from the app and then re-add it.
  • Doorbell not responding or malfunctioning:
    • Check the battery level. If low, charge the doorbell using the provided Type-C cable.
    • Perform a factory reset: Press and hold the power button at the back of the doorbell for 7 seconds. The indicator will blink orange, and a voice notification will confirm the reset. (Requires Mi Home app version 10.6 or above for full functionality after reset).
  • Poor image quality:
    • Ensure the lens is clean and free from dust or smudges.
    • Check for reflective surfaces near the doorbell that might interfere with the camera's exposure.
Screenshot from Mi Home App showing the reset device option for Xiaomi Smart Doorbell 4.

Image: Resetting the device via the Mi Home App.

8. User Tips

  • The 2K picture quality is excellent, providing clear and vibrant colors for monitoring.
  • While the doorbell offers 72-hour free cloud storage, it does not support local SD card storage for continuous recording.
  • The voice changer feature provides three distinct options for enhanced privacy during two-way communication.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact your local authorized service center. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.