KENSEN S26 Electric Shaver User Manual

1. Introduction

Thank you for choosing the KENSEN S26 Electric Shaver. This manual provides important information for safe and effective use, maintenance, and troubleshooting of your new shaver. Please read it thoroughly before first use and keep it for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Damage caused by personal reasons is not covered by after-sales service.
• Do not wash the shaver body in water until the Type-C charging cable is unplugged.
• The product must only be charged with the matching cable provided.
• Do not continue to use the shaver if the cutter head is damaged or deformed.
• Do not use the shaver if your skin has inflammation, acne, or other skin conditions.
• Do not dispose of the shaver in fire or heat; it contains a rechargeable battery which may cause overheating or rupture.
• Do not disassemble the shaver except for battery removal at the end of its life cycle for proper disposal.
• Do not press the shaver strongly against your skin; this may cause injury or skin irritation.
• Do not share the shaver with family members or others for hygiene reasons.
• Keep the shaver out of reach of children.
• The recommended operating environment temperature is between 0°C and 40°C.

3. Product Overview

Familiarize yourself with the components of your KENSEN S26 Electric Shaver:

• Cutterhead Cap: Protects the blades when not in use.
• Cutter Head Assembly: Contains the 4D floating blades for shaving.
• Switch Button: Powers the shaver on/off and activates/deactivates the travel lock.
• Device Body: Main housing of the shaver, containing the motor and battery.

4. Specifications

5. Setup

5.1 Initial Charging

Before using your KENSEN S26 Electric Shaver for the first time, ensure it is fully charged.

1. Connect the provided Type-C charging cable to the charging port on the shaver.
2. Plug the other end of the cable into a compatible 5V/1A USB power adapter (not included) or a USB port.
3. The charging indicator lights on the shaver will illuminate to show the charging status.
4. A full charge takes approximately 90 minutes. Once fully charged, the shaver provides about 120 minutes of wireless usage time.

6. Operation

6.1 Turning On/Off

Press the switch button once to turn the shaver on. Press it again to turn the shaver off.

6.2 Shaving

The KENSEN S26 Electric Shaver is designed for both wet and dry shaving, offering flexibility for your grooming routine.

• Dry Shaving: For a quick and convenient shave, use the shaver on dry skin.
• Wet Shaving: For a more comfortable and smoother shave, apply shaving foam or gel to your face before using the shaver.

Move the shaver gently against the direction of hair growth. The 4D floating blades will adapt to the contours of your face, ensuring a close and efficient shave.

6.3 Travel Lock

The travel lock feature prevents the shaver from accidentally turning on when stored in your bag, conserving battery and preventing potential hazards.

1. To Activate: With the shaver off, press and hold the switch button for a few seconds until the travel lock indicator (usually a lock icon) appears.
2. To Deactivate: Press and hold the switch button again for a few seconds until the travel lock indicator disappears.

7. Maintenance

7.1 Cleaning

Regular cleaning ensures optimal performance and hygiene of your shaver.

1. Turn off the shaver and unplug it from any charging cable.
2. The KENSEN S26 is IPX6 waterproof, allowing for easy rinsing under running water.
3. The blade head is magnetically detachable for thorough cleaning. Carefully remove the blade head from the shaver body.
4. Rinse the blade head and the shaver body under running water to remove hair clippings and debris.
5. Use the provided cleaning brush to remove any stubborn hair particles from the blades and inside the shaver.
6. After cleaning, shake off excess water and wipe the shaver dry with a clean cloth or tissue. Do not wipe the blades with a towel or tissue as this may damage them.
7. Reattach the blade head to the shaver body.

7.2 Blade Replacement

The blades of your KENSEN S26 shaver are designed for durability. If you notice a decrease in shaving performance over time, it may be necessary to replace the blade head assembly. For compatible replacement parts and instructions, please refer to the official Kensen website or contact customer support.

8. Troubleshooting

If you encounter any issues with your KENSEN S26 Electric Shaver, please refer to the following troubleshooting guide:

• Shaver not working properly:
  1. Check if the blade head is clogged with hair. Turn off the shaver, remove the blade head, and clean the inside and outside thoroughly with the provided cleaning brush.
  2. Ensure the battery is sufficiently charged. If the battery is low or exhausted, fully charge the shaver for approximately 90 minutes.
• Unusual noise during use:
  1. Immediately turn off the shaver.
  2. Check if the blade head or any part of the shaver is deformed or damaged. If any damage is found, discontinue use and contact Kensen customer support.
• Shaver not charging:
  1. Verify that the Type-C charging cable is securely connected to both the shaver and the power adapter.
  2. Ensure the power adapter is functioning correctly and meets the 5V/1A output specification.
  3. If the charging indicator does not light up after connecting, try a different USB port or power adapter. If the issue persists, contact customer support.

9. User Tips

• For optimal shaving results, always ensure your shaver is fully charged before starting your shave.
• Make it a habit to regularly clean the blade head after each use to prevent hair buildup and maintain peak performance and hygiene.
• Always activate the travel lock feature when storing or transporting your shaver to prevent accidental power-on and battery drain.
• The compact and portable design of the KENSEN S26 makes it perfect for travel. Take advantage of its USB-C charging capability to charge it conveniently in your vehicle or with a power bank on the go.

10. Warranty & Support

KENSEN is committed to providing high-quality products and excellent customer service.

• Warranty Extension: Register your product within 7 days of receipt to receive an extended 6-month warranty.
• Lifetime Technical Support: We offer lifetime technical support for your KENSEN S26 Electric Shaver.
• Official Service Email: For any inquiries or support, please contact us at service@kensen.com.cn.
• Official Website: Visit our official website at kensen.co for more information, product registration, and support resources.

A detailed user manual in PDF format is available for download on the Kensen official website or can be accessed via the provided link: User manual (PDF).

11. Environmental Protection & Disposal

This product contains a rechargeable battery. To protect the environment, please dispose of the shaver responsibly at the end of its service life.

• Remove the rechargeable battery only when discarding the electric shaver.
• Follow local regulations for the separate collection of batteries and electronic waste. Do not dispose of the product with general household waste.