Introduction
The Lemorele Wireless HDMI Transmitter and Receiver system provides a seamless solution for extending HDMI signals wirelessly. It supports 1080P@60Hz resolution, low latency, and offers various configurations for different needs, including multi-receiver setups and app monitoring. This manual will guide you through the setup, operation, and maintenance of your device.
Video: Overview of the Lemorele Wireless HDMI Extender, demonstrating its features and applications.
Product Variations
The Lemorele Wireless HDMI system is available in several configurations to suit various requirements:
- R1000: Equipped with 1 Transmitter (TX) and 1 Receiver (RX).
- R2020: Equipped with 1 Receiver (RX) alone. Note: RX units cannot be used alone; they must be paired with a TX unit.
- R1010: Equipped with 1 Transmitter (TX) and 2 Receivers (RX).
- R1030: Equipped with 1 Transmitter (TX) and 3 Receivers (RX).
- R1040: Equipped with 1 Transmitter (TX) and 4 Receivers (RX).
- R800: Equipped with 1 Transmitter (TX) alone. This TX unit can be used independently with the TUTUplay app as a receiver, supporting up to 4 simultaneous app connections.
Please choose the appropriate model based on your specific needs.
Package Contents
The contents of your package will vary depending on the model purchased:
For Only TX or Only RX (R800 or R2020):
- Transmitter or Receiver x 1
- Antenna x 1
- User Manual x 1
- 100cm USB C Cable x 1

Image: Contents for a single Transmitter (TX) or Receiver (RX) unit.
For R1000 (1 TX and 1 RX):
- Transmitter x 1
- Receiver x 1
- Antenna x 2
- User Manual x 1
- HDMI Adapter x 1
- 100cm USB C Cable x 2

Image: Contents for R1000 (1 TX and 1 RX) model.
For R1010 (1 TX and 2 RX):
- Transmitter x 1
- Receiver x 2
- Antenna x 3
- User Manual x 1
- HDMI Adapter x 2
- 100cm USB C Cable x 3

Image: Contents for R1010 (1 TX and 2 RX) model.
For R1030 (1 TX and 3 RX):
- Transmitter x 1
- Receiver x 3
- Antenna x 4
- User Manual x 1
- HDMI Adapter x 3
- 100cm USB C Cable x 4

Image: Contents for R1030 (1 TX and 3 RX) model.
For R1040 (1 TX and 4 RX):
- Transmitter x 1
- Receiver x 4
- Antenna x 5
- User Manual x 1
- HDMI Adapter x 4
- 100cm USB C Cable x 5

Image: Contents for R1040 (1 TX and 4 RX) model.
Setup Instructions
1. Initial Connection (Plug and Play)
- Plug the Transmitter (TX) unit into the HDMI port of your source device (e.g., computer, camera, laptop, set-top box).
- Connect the Receiver (RX) unit to the HDMI input port of your display device (e.g., TV, projector, monitor).
- Ensure both TX and RX units are powered using the provided USB-C cables and a 5V2A power supply.
- Wait for 5-10 seconds for the devices to automatically connect and begin projecting. No further configuration is typically required for initial setup.

Image: Transmitter connected to a laptop and receiver connected to a TV.

Image: Receiver connected to a TV.

Image: Transmitter connected to a laptop.
2. Pairing Additional Receivers (if purchased separately)
If you have purchased an RX unit separately (e.g., R2020) and need to pair it with an existing TX unit, follow these steps:

Image: Pairing steps for additional receivers.
- On the Receiver (RX): Press and hold the receiver's function button for over 5 seconds. A prompt will appear on the interface. Release the button to pair with the Lemorele TX.
- On the Transmitter (TX): Next, press and hold the transmitter's function button for over 5 seconds. The indicator light will flash rapidly to indicate that pairing has started.
- Wait for the transmitter's indicator light to remain steady, confirming a successful connection.
3. APP Monitoring Setup (for R800 TX unit or any TX unit with app monitoring)
The Lemorele system supports monitoring via the TuTuPlay app on Android and iOS devices. This is particularly useful for the R800 (TX only) model, allowing your mobile device to act as a receiver.

Image: Connection steps for the TuTuPlay app.
- Download the App: Go to the App Store (iOS) or Google Play (Android) and install the "TuTuPlay" APP.
- Connect to Sender WiFi: Open the TuTuPlay software and follow the prompts on the interface. Go to the Wi-Fi settings on your computer or phone. Search for the Wi-Fi network named "TuTuXXX" and click Connect. The password is "tc556678".
- Start Monitoring: After the connection is completed, you can use the app to monitor the video feed.
Note: When only one app is connected, the maximum transmission range is 100 meters.
Operating Instructions
1. Wireless Screen Casting
Once the Transmitter (TX) and Receiver (RX) units are successfully connected, your source device's display will be mirrored or extended wirelessly to the connected display device. The system supports Full HD video (1080P@60Hz).

Image: Lemorele Wireless HDMI Extender units.

Image: Wireless screen casting in a classroom.
2. Multi-Scenario Applications
The system is versatile and can be used in various environments:
- Live Streaming & Video Production: Connect cameras to monitors wirelessly for real-time monitoring.
- Presentations: Share content from laptops to projectors or large screens in meeting rooms or classrooms.
- Home Entertainment: Stream content from your PC or TV box to a TV or projector in another room.
- Gaming: Use an iPad as a monitor for gaming consoles like Nintendo Switch.

Image: Multi-scenario applications, including live streaming and app monitoring.

Image: Multi-receiver setup with a camera as source.

Image: Using an iPad as a Switch monitor.

Image: Enjoying wireless streaming from living room to patio projector.
Maintenance
- Keep the devices clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the devices to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the devices yourself, as this will void the warranty.
- Ensure proper ventilation around the devices during operation.
Troubleshooting
Common Issues and Solutions:
- Unsuccessful screen casting, connection lags, sudden disconnection, display interface not showing SSD and password:
Solution: These issues are often caused by insufficient power. Always use a 5V2A power supply for both the Transmitter (TX) and Receiver (RX) units to ensure optimal performance of the Wi-Fi module.
- No signal or black screen:
- Ensure both TX and RX units are properly connected to their respective devices and powered on.
- Verify that the HDMI cables (if used with adapters) are securely connected.
- Check the input source on your display device to ensure it's set to the correct HDMI input.
- Try restarting both the source device and the display device.
- Difficulty pairing RX with TX:
- Follow the manual pairing steps precisely, ensuring you press and hold the function buttons for the specified duration (over 5 seconds) on both units.
- Ensure the units are within close proximity during the pairing process.
- Verify that both units are receiving adequate power.
- App monitoring issues (TuTuPlay):
- Ensure the TuTuPlay app is installed correctly and updated to the latest version.
- Verify that your mobile device is connected to the TX unit's Wi-Fi network (SSID "TuTuXXX", password "tc556678").
- Check for any firewall or network restrictions on your mobile device that might prevent the app from connecting.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Lemorele |
| Connector Type | Wireless |
| Origin | Mainland China |
| Certification | CE, RoHS, FCC |
| Type | Wireless HDMI Extender |
| Resolution | 1080P@60Hz |
| Wireless Technology | 5G + 2.4G Dual-band Wi-Fi with Adaptive Frequency Hopping (Realtek High-Performance Modules) |
| Codec Technology | H.264 |
| Transmission Range (1 TX to 1 RX) | 200 meters / 656 feet |
| Transmission Range (1 TX to 2 RX) | 130 meters / 426 feet |
| Transmission Range (1 TX to 3/4 RX) | 100 meters / 328 feet |
| Transmission Range (1 TX to 1 APP) | 100 meters |
| Max Receivers per TX | 4 (physical RX units or TuTuPlay apps) |
| Application | Monitor, Projector, Television, TV box, Camera, Laptop, PC, Tablet, Phone |
| Power Supply Requirement | 5V2A (recommended for optimal performance) |
| Package Length | 22 cm |
| Package Width | 23 cm |
| Package Height | 3 cm |
| Package Weight | 0.6 kg |
Note: The above transmission range data is obtained from LEMORELE laboratory testing.

Image: Transmission range specifications for different TX/RX configurations.

Image: Enterprise-grade Wi-Fi antenna with 5G+2.4G dual-band and intelligent channel scanning.
Warranty and Support
Lemorele offers comprehensive support and warranty services for its products:
- Free Returns: Enjoy free returns within 90 days of purchase.
- Fast Delivery Guarantee:
- $1.00 coupon code if delivery is delayed.
- Full refund if the package is lost.
- Full refund if items are damaged upon arrival.
- Full refund if no delivery within 60 days.
- 1-Year Warranty: The product comes with a 1-year warranty, covering manufacturing defects and technical issues.
- Shopping Help: Get assistance with your order within 24 hours on business days.
- 7 Days Return: Easy return process within 7 days if you change your mind.
For any issues or inquiries, please contact Lemorele Official Store customer service. They aim to respond within 24 hours on business days.

Image: Warranty and Service information.