Introduction
Welcome to the user manual for your new LEEDOAR NX19 Smart Watch. This elegant and feature-rich smartwatch is designed to complement your lifestyle, offering a blend of fashion and technology. It features a stunning 1.3-inch HD screen, Bluetooth calling capabilities, and comprehensive health monitoring functions including heart rate, blood oxygen, and blood pressure tracking. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your device to ensure you get the most out of its advanced features.

Setup Guide
1. Charging the Smart Watch
Before first use, fully charge your NX19 Smart Watch. Use the provided magnetic charging cable. Connect the magnetic end to the charging contacts on the back of the watch and the USB end to a standard USB power adapter (not included).
- Charging Time: Approximately 2 hours for a full charge.
- Battery Life: Up to 5 days of working time, 25 days standby.

2. App Installation
To unlock the full potential of your NX19 Smart Watch, download and install the companion application on your smartphone.
- App Name: Fitcloudpro
- Compatibility: Android OS 5.0 and above, iOS 10.0 and above.
- Search for "Fitcloudpro" in your smartphone's app store (Google Play Store for Android, Apple App Store for iOS) and install it.
3. Device Pairing
Once the app is installed and your watch is charged, follow these steps to pair your watch with your smartphone:
- Ensure Bluetooth is enabled on your smartphone.
- Open the Fitcloudpro app and follow the on-screen instructions to add a new device.
- Select "NX19" from the list of available devices.
- Confirm the pairing request on both your phone and the watch.
- Once paired, the watch will synchronize data and settings with the app.
Operating Instructions
Basic Navigation
- Touch Screen: The 1.3-inch HD IPS touch screen allows for intuitive navigation. Swipe left/right, up/down, and tap to select options.
- Side Button: Typically used to wake the screen, return to the home screen, or access the main menu.
Key Features
Bluetooth Calls & Notifications
The NX19 supports HD Bluetooth calls, allowing you to answer or dial directly from your wrist. It also provides call and message reminders, as well as notifications from social media applications (WeChat, QQ, Facebook, etc.).


Health Monitoring
Monitor your health with integrated sensors:
- Heart Rate Monitor: Tracks your heart rate continuously.
- Blood Oxygen Monitor: Measures your blood oxygen saturation levels.
- Blood Pressure Monitor: Provides blood pressure readings.
- Sleep Monitor: Analyzes your sleep patterns (sleep time, sleep quality) to help improve sleep habits.


Activity Tracking
The watch tracks your daily activities:
- Steps Tracker: Counts your daily steps.
- Distance Tracker: Estimates the distance you've walked or run.
- Calories: Calculates calories burned.
- Multiple Sports Modes: Supports various sports modes like cycling, basketball, and swimming to record exercise data in real-time.

Music Control
Connect your watch to your mobile phone via Bluetooth to control music playback, adjust volume, and switch tracks directly from your wrist.

Personalized Dials
Easily switch between various watch faces to match your style and mood. The app offers a wide selection of creative dials.

Other Functions
- Task Reminder: Includes sedentary reminders to encourage movement.
- Remote Camera: Control your phone's camera remotely.
- Supported Languages: Chinese, English (default), German, French, Italian, Spanish, Japanese, Polish, Russian, Portuguese, Vietnamese, Arabic, Hebrew, Thai, Croatian, Turkish, Czech, Dutch, Indonesian, Malaysian, Finnish, Greek, Romanian.
Maintenance
Water Resistance
The NX19 Smart Watch has an IP68 waterproof rating, meaning it is resistant to dust and can withstand immersion in water up to 1.5 meters for 30 minutes. It is suitable for daily use, such as washing hands, getting caught in the rain, and even swimming. However, it is not recommended for hot showers, saunas, or diving, as steam and high water pressure can compromise the seals.

Cleaning and Care
- Wipe the watch and strap regularly with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the watch's finish and sensors.
- Ensure the charging contacts are clean and dry before charging to prevent corrosion.
- Store the watch in a cool, dry place when not in use.
Troubleshooting
Watch not turning on or charging
- Ensure the magnetic charging cable is correctly aligned with the watch's charging contacts.
- Check if the USB power adapter is working correctly. Try a different adapter or USB port.
- Allow the watch to charge for at least 30 minutes before attempting to turn it on again.
Unable to pair with smartphone
- Make sure Bluetooth is enabled on your smartphone and the watch is within range.
- Ensure the Fitcloudpro app is installed and updated to the latest version.
- Restart both your smartphone and the watch.
- If the watch was previously paired with another device, unpair it from that device first.
- Reset the watch to factory settings (if available in the watch's menu or app) and try pairing again.
Inaccurate health data readings
- Ensure the watch is worn snugly on your wrist, about one finger's width above the wrist bone.
- Avoid excessive movement during measurements.
- Clean the sensor on the back of the watch.
- Note that smartwatches are not medical devices; readings are for reference only and should not be used for medical diagnosis.
Notifications not appearing
- Check if the watch is properly connected to your smartphone via Bluetooth.
- Ensure notification permissions are granted to the Fitcloudpro app in your phone's settings.
- Verify that app notifications are enabled within the Fitcloudpro app for the specific applications you wish to receive alerts from.
- Make sure your phone's 'Do Not Disturb' mode is not active.
Specifications

| Feature | Detail |
|---|---|
| Model | NX19 |
| Brand Name | LEEDOAR |
| Weight | About 68g |
| Screen Size | 1.3-inch IPS HD screen |
| Resolution | 360*360 |
| Display Brightness | 400 lumens |
| Touch Screen | G+F process |
| System Compatibility | Android OS 5.0 and above, iOS 10.0 and above |
| Bluetooth Version | BLE 5.2 + BT 3.0 |
| Main Control Chip (CPU) | RTL8763EWE |
| Memory (RAM+ROM) | 640kByte ROM, 578kByte RAM |
| FLASH | 128Mb FLASH |
| Battery Capacity | 200mAh Polymer Lithium Battery |
| Standby Time | 25 Days |
| Working Time | About 5 Days |
| Charging Time | 2 Hours |
| Charging Mode | 2PIN Magnetic Charger |
| Gravity Sensor | Silicon STK8321 |
| Heart Rate Sensor | HX3605 |
| Motor | Built-in: 0820 |
| Horn | 1508 (Waterproof Speaker) |
| Microphone | TMG4015 (Waterproof Microphone) |
| Waterproof Rating | IP68 |
| Case Material | Zinc alloy face case + PC bottom case |
| Band Material | Stainless steel strap (Alloy) |
| Certification | CE, FCC |
User Tips
- Optimize Battery Life: To extend battery life, consider reducing screen brightness, limiting frequent notifications, and disabling continuous heart rate monitoring if not needed.
- Regular Syncing: Sync your watch with the Fitcloudpro app regularly to ensure all your health and activity data is saved and updated.
- Explore Watch Faces: Don't forget to explore the variety of watch faces available through the app to personalize your device and match your outfit or mood.
- Firmware Updates: Check the Fitcloudpro app periodically for firmware updates for your watch. Updates often bring new features, performance improvements, and bug fixes.
- Wearing Comfort: For accurate health monitoring, ensure the watch is worn comfortably snug on your wrist. If it's too loose, sensor readings may be inaccurate.
Warranty and Support
Your LEEDOAR NX19 Smart Watch comes with a manufacturer's warranty covering defects in materials and workmanship under normal use. Please refer to the warranty card included with your product for specific terms and conditions, including the warranty period.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or the manufacturer's customer service. Contact information can typically be found on the product packaging or the seller's official website.
Please retain your proof of purchase for any warranty-related inquiries.