EzoneTronics Car DAB/DAB+ Radio Adapter

Contents

EzoneTronics Car DAB/DAB+ Radio Adapter User Manual

Model: Car DAB/DAB+ Radio Adapter

Brand: EzoneTronics

1. Introduction

Thank you for choosing the EzoneTronics Car DAB/DAB+ Radio Adapter. This device is designed to seamlessly upgrade your in-car audio system, allowing you to enjoy high-quality digital radio (DAB/DAB+) and FM transmission without replacing your existing car stereo. With its portable design, high sensitivity, and easy installation, you can access a wide range of digital radio channels while driving.

2. Package Contents

Please check the box for the following items:

  • 1x DAB+ Receiver
  • 1x Car Charger
  • 1x Magnet Holder
  • 1x USB Cable
  • 1x Antenna
Package contents of the EzoneTronics DAB/DAB+ Radio Adapter
The package includes: 1x DAB+ Receiver, 1x Car Charger, 1x Magnet Holder, 1x USB Cable, and 1x Antenna.

3. Key Features

  • Seamless Upgrade: Easily add digital radio (DAB/DAB+/FM) to your car without replacing the existing audio system.
  • High-Quality Digital Sound: Experience superior DAB digital sound compared to traditional radio, with clear and smooth audio.
  • Unlimited Presets: Quickly select and store your favorite DAB+ stations.
  • High-Definition TFT Digital Display: Equipped with a 1.2-inch digital display for easy viewing of station information and presets.
  • Multiple Connection Methods: Integrated FM transmitter ensures no noise or interference when receiving DAB signals.
  • Easy Installation: Suitable for both old and new cars, offering a simple plug-and-play experience.
  • Durable Design: Waterproof and dustproof for enhanced longevity.
  • High Signal Sensitivity: Advanced antenna with amplification ensures strong and stable signal reception.
EzoneTronics Car DAB/DAB+ Radio Adapter with antenna and key features
The EzoneTronics External DAB+ Adapter, featuring a 1.2-inch screen, intuitive knobs, and a highly sensitive, flexible antenna. Key features include waterproof and dustproof design, high signal sensitivity, plug-and-play functionality, and long service life.

4. Setup and Installation

Follow these steps for proper installation of your DAB/DAB+ Radio Adapter:

4.1 Antenna Installation

  1. Prepare the Surface: Choose a clean, flat surface on your car's windshield or side window for antenna placement.
  2. Antenna Placement: It is suggested to leave a 2-3 cm gap from the window frame. Attach the antenna film in a vertical direction. The amplifier (AMP) part of the antenna should be positioned at the top.
  3. Grounding: Before installation, carefully remove the protective paper from the DAB antenna. Ensure the copper part of the antenna is connected to a metal surface (ground electrode) for optimal signal reception.
  4. Cable Routing: Route the antenna cable discreetly to the location where you plan to place the DAB+ Receiver.
Detailed instructions for easy antenna installation in a car
This image provides a step-by-step guide for antenna installation. It suggests leaving a 2-3cm gap from the window frame and attaching the film in a vertical direction. The AMP (amplifier) should be at the top. Crucially, before installation, remove the protective paper from the DAB antenna, and ensure the copper part is connected to a metal (ground electrode) surface. The final image shows the antenna positioned for a left-hand drive vehicle.

4.2 Receiver Connection

  1. Connect Antenna: Plug the antenna cable into the MCX interface on the DAB+ Receiver.
  2. Power Connection: Connect the USB cable to the DAB+ Receiver and then to the provided car charger. Insert the car charger into your vehicle's 12V power outlet (cigarette lighter socket).
  3. Mounting: Use the magnet holder to securely mount the DAB+ Receiver in a convenient location within your car.
  4. Audio Output: The adapter will transmit audio to your car's existing stereo system via FM transmission. Tune your car radio to an unused FM frequency, and then set the DAB+ adapter to transmit on the same frequency.
Diagram showing plug and play connection of DAB+ adapter to car stereo
This diagram demonstrates the plug-and-play connection. The advanced antenna, with amplification and high sensitivity, connects to the MCX interface of the DAB+ receiver. The receiver then connects via USB to a power source and transmits audio to the car's existing stereo system, often through FM transmission.
Installation effect of DAB+ antenna in a car interior
Illustrates flexible installation options for the DAB+ antenna within a car, showing placement on the dashboard, near the gear shift, and on the side window, ensuring optimal signal reception.

5. Operating Instructions

Once installed and powered on, the DAB/DAB+ Radio Adapter is ready for use.

5.1 Power On/Off

  • The device typically powers on automatically when the car's ignition is turned on.
  • To power off, disconnect the car charger or turn off the car's ignition.

5.2 Scanning for DAB/DAB+ Stations

  1. Upon first use or after moving to a new area, the adapter may automatically scan for available DAB/DAB+ stations.
  2. If a manual scan is needed, refer to the on-screen menu using the control knobs to initiate a full scan.
  3. The 1.2-inch TFT digital display will show available stations and current broadcast information.

5.3 Selecting Stations and Presets

  • Use the control knobs to navigate through the list of available stations.
  • Select a station to begin listening.
  • The device supports unlimited station presets. Follow the on-screen instructions to save your favorite stations for quick access.

5.4 FM Transmitter Function

The adapter uses an integrated FM transmitter to send audio to your car's existing FM radio.

  1. Tune Car Radio: Select an unused FM frequency on your car's FM radio (one with no broadcast signal, typically static).
  2. Set Adapter FM Frequency: On the DAB+ adapter, navigate to the FM transmitter settings and set it to the exact same unused FM frequency you selected on your car radio.
  3. Enjoy Digital Radio: The digital audio from the DAB+ adapter will now be transmitted to your car's stereo system via FM.
Car interior with people enjoying strong and stable DAB+ radio signal
Depicts users enjoying clear and smooth digital radio stations with high-quality, CD-like sound, thanks to the strong and stable signal reception of the DAB+ adapter.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Antenna Care: Ensure the antenna remains securely attached and free from damage. Periodically check the grounding connection.
  • Storage: If not in use for an extended period, store the device in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

No Power:
Ensure the car charger is properly inserted into the 12V outlet and the USB cable is securely connected to the adapter. Check if the car's 12V outlet is functioning.
No DAB/DAB+ Signal:
Check antenna connection and placement. Ensure the copper part of the antenna is properly grounded to a metal surface. Perform a full station scan. Signal strength can vary by location.
Poor Audio Quality (FM Transmission):
Ensure your car radio and the adapter are tuned to the exact same, unused FM frequency. Try a different FM frequency if interference is present. Reduce the distance between the adapter and your car's FM antenna if possible.
Display Not Working:
Check power connection. If the issue persists, try resetting the device by disconnecting and reconnecting power.

8. Specifications

AttributeValue
Brand NameEzoneTronics
GPS TypeReceiver & Antenna
OriginMainland China
Package Length20 cm
Package Width15 cm
Package Height6 cm
Package Weight0.239 kg

9. User Tips

  • For best reception, experiment with different antenna placements on your windshield or side windows. A higher position often yields better results.
  • When using the FM transmitter, choose a frequency that is completely clear of any local radio stations to minimize interference and maximize sound clarity.
  • Regularly check for firmware updates (if available) from the manufacturer's website to ensure optimal performance and access to new features.
  • Ensure the copper part of the antenna is always in good contact with a metal surface for effective grounding, which is crucial for signal stability.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact EzoneTronics customer service.

A comprehensive user manual in PDF format is also available for download: Download User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.