1. Introduction
The Godox iT20 and iT22 are ultra-compact mini TTL camera flashes designed for portability and ease of use. Weighing approximately 45g (iT20) or 52g (iT22), these flashes are perfect for both outdoor shooting and daily photography, easily fitting into your pocket. They offer TTL (Through-The-Lens) and Manual (M) modes, providing precise light control for various photographic scenarios. The innovative magnetic accessory system allows for quick switching between different light effects, enabling creative and unique atmospheres.
Image: Overview of Godox iT20 and iT22 mini camera flashes, highlighting their compact design and versatility.
2. Package Contents
Please check the contents of your package upon unboxing. The standard package for both iT20 and iT22 models includes:
- Flash Body (iT20 or iT22) x1
- USB-C Charging Cable x1
- Instruction Manual x1
- Magnetic Spreader x1
- 1/2 CTO Magnetic Color Filter x1
- 1/1 CTO Magnetic Color Filter x1
- Storage Bag x1
Optional accessories available for separate purchase:
- Softbox iT20-DF (Compatible with iT20)
- TR (C N S F O) TTL Hot Shoe Riser
- iFlash On-Camera Flash Light Magnetic Attachment MA01 (Compatible with iM20/22, iT20/22)
Image: Detailed view of the iT20 package contents, including flash body, USB-C cable, magnetic spreader, color filters, and storage bag.
Image: Detailed view of the iT22 package contents, including flash body, USB-C cable, magnetic spreader, color filters, and storage bag.
Image: Optional accessories such as the Softbox iT20-DF, TR TTL Hot Shoe Riser, and MA01 Magnetic Attachment.
3. Product Overview
The Godox iT20/iT22 flashes are designed with key features to enhance your photography experience:
- Ultra-Compact Design: Weighing approximately 45g (iT20) or 52g (iT22), these flashes are featherlight and take up minimal space.
- High Performance: Offers 700+ flashes at full power and a rapid 1.5-second recycling time.
- Precise Power Control: In Manual (M) mode, adjust flash intensity across 6 stops (1/32 to 1/1 power) in precise ±1/3-step increments.
- Magnetic Accessories: Equipped with magnetic snap-on diffusers, color filters (CTO/CTB), creative gels, and honeycomb grids for quick light effect switching.
- One-Touch M/TTL Mode Switching: Easily toggle between Manual and TTL modes with a dedicated button. The high-definition display shows clear, real-time settings.
- Lightweight Lithium Battery: Built-in lithium battery charges swiftly via USB-C, providing power for extended shoots (approx. 1h10min charging time for 500 full power flashes).
- 0-90° Tilt Adjustment: When used with the optional TR TTL Hot Shoe Riser, the flash can be tilted from 0-90° for direct or bounce flash.
Image: The iT20 flash held in a hand, demonstrating its 45g ultra-compact design.
Image: A user shooting with the flash, illustrating 700+ flashes and 1.5s recycling time.
4. Setup
4.1 Charging the Battery
- Locate the USB-C port on the side of the flash unit.
- Connect the provided USB-C charging cable to the flash unit.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., wall adapter, computer USB port).
- The battery indicator on the flash display will show charging status. A full charge takes approximately 1 hour and 10 minutes.
Image: Godox iT20 and iT22 flashes connected via USB-C for charging, showing battery indicator.
4.2 Attaching to Camera
- Ensure your camera is turned off.
- Slide the flash unit onto your camera's hot shoe mount.
- Secure the flash by tightening the locking mechanism (if present) on the flash or camera hot shoe.
- If using the optional TR TTL Hot Shoe Riser, attach the riser to the camera's hot shoe first, then attach the flash to the riser.
4.3 Attaching Magnetic Accessories
The iT20/iT22 flashes feature a magnetic front panel for easy attachment of light modifiers.
- Align the desired magnetic accessory (e.g., magnetic spreader, color filter) with the front of the flash head.
- The magnets will automatically snap the accessory into place.
- To remove, gently pull the accessory away from the flash head.
Image: Examples of the iT20 flash with various magnetic accessories like color filters and spreaders.
Image: A range of magnetic accessories including honeycomb, diffuser, and various color filters (CTB, CTO, Cyan, Blue, Yellow, Magenta, TG, Green, Red).
5. Operating Instructions
5.1 Power On/Off
- To power on, press and hold the power button (usually marked 'MODE' or 'M') for a few seconds until the display illuminates.
- To power off, press and hold the power button again until the display turns off.
5.2 Switching M/TTL Modes
The flash allows for quick switching between Manual (M) and TTL (Through-The-Lens) modes.
- Press the 'MODE' button to toggle between M and TTL modes. The current mode will be displayed on the screen.
Image: Close-up of the flash controls, showing the 'M' button for Manual mode and 'MODE' button for switching between modes.
5.3 Adjusting Flash Intensity (Manual Mode)
In Manual (M) mode, you can precisely control the flash output.
- Once in M mode, use the '+' and '-' buttons to adjust the flash power level.
- The power can be set from 1/32 to 1/1 (full power) in ±1/3-step increments.
Image: Visual representation of flash intensity at 1/4, 1/2, and 1/1 power settings.
5.4 Using TTL Mode
In TTL mode, the flash automatically adjusts its output based on the camera's metering system, providing effortless and accurate exposure.
- Ensure the flash is in TTL mode (indicated on the display).
- The flash will communicate with your camera to determine the appropriate flash output.
- You can use flash exposure compensation on your camera or the flash unit (if available) to fine-tune the exposure.
Image: A user operating the flash in TTL mode, demonstrating its smart and effortless results.
5.5 Tilt Adjustment (with TR Riser)
If you are using the optional TR TTL Hot Shoe Riser, you can adjust the flash head's tilt angle.
- The riser allows for a 0-90° tilt adjustment.
- Gently adjust the flash head to the desired angle for direct or bounce flash photography.
Image: Diagram illustrating the 0-90° tilt adjustment range of the flash when mounted on a riser.
Image: The flash mounted on the TR TTL Hot Shoe Riser, demonstrating how it elevates the flash for better clearance.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the flash body. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Do not use harsh chemicals or solvents.
- Storage: Store the flash in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag for protection.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% every few months.
- Avoid Impact: The flash is a precision electronic device. Avoid dropping or subjecting it to strong impacts.
7. Troubleshooting
- Flash not firing:
- Ensure the flash is securely mounted on the camera's hot shoe.
- Check if the flash is powered on and the battery has sufficient charge.
- Verify camera and flash settings are compatible (e.g., flash mode enabled on camera).
- Flash output too bright/dark:
- In TTL mode, check flash exposure compensation settings on both camera and flash.
- In Manual mode, adjust the power level using the '+' and '-' buttons.
- Ensure magnetic accessories are correctly attached and not obstructing the flash output.
- Flash not recycling quickly:
- This may indicate a low battery. Recharge the flash.
- Recycling time is longer at full power (1/1). Reduce power for faster recycling.
8. Specifications
| Feature | iT20 | iT22 |
|---|---|---|
| Compatible Cameras | C: Canon (E-TTL II), N: Nikon (i-TTL), S: Sony (TTL), F: Fujifilm (TTL), O: OM System/Panasonic (TTL) | |
| Built-in Lithium Battery | 7.4V, 300mAh | |
| Input | 5V=0.6A | |
| Charging Time | Approx. 1h10min | |
| Flash Times (1/1 Power) | Approx. 700 | |
| Recycling Time (1/1 Power) | ≈1.5s | |
| Flash Power Levels | 1/32 ~ 1/1, adjustable in ±1/3 increments | |
| Operating Environment Temperature | -10℃~+50℃ | |
| Synchronization Trigger | Hot Shoe | |
| Dimensions | 41.5×41×32mm | 40×64×28mm |
| Net Weight | ≈45g | ≈52g |
Image: Technical specifications table for Godox iT20 and iT22 flashes.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Godox website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
Official Website: www.godox.com
