OUKITEL P1000E PLUS Portable Power Station User Manual

1. Introduction

The OUKITEL P1000E PLUS is a versatile and powerful portable power station designed to provide reliable electricity for various applications, including home backup, outdoor camping, and mobile power needs. Featuring a 1024Wh LiFePO4 battery and an 1800W AC output, it offers fast charging capabilities, quiet operation, and smart app control. This manual provides essential information for the safe and efficient use of your power station.

OUKITEL P1000E PLUS Portable Power Station

2. Setup and Initial Use

2.1 What's in the Box

Upon unboxing, please verify that all components are present:

Contents of the OUKITEL P1000E PLUS box — P1000 Plus Power Station and AC Charging Cable

OUKITEL P1000E PLUS Power Station
AC Charging Cable
User Manual (this document)

2.2 Initial Charging

Before first use, it is recommended to fully charge the power station. The P1000E PLUS supports multiple charging methods:

AC Wall Charging

Connect the provided AC charging cable to the power station's AC input port and then to a standard wall outlet. The device features 1200W AC fast charging, allowing it to reach 80% capacity in approximately 39 minutes and 100% in 50 minutes.

Power station charging from an AC outlet — AC Charging: Reach 70% battery capacity in just 30 minutes

Power station charging from an AC outlet, showing 1200W AC Input: 80% Charge in 39 Mins — AC Input: 1200W 80% Charge in 39 Mins

Solar Charging

Connect compatible solar panels (Max 500W) to the XT60 port. Solar charging can fully charge the unit in approximately 2 hours under optimal sunlight conditions.

Power station connected to solar panels — Solar Input: Max. 500W Full Charge in 2 Hrs

Car Charging

Use a car charger (not included, but compatible with 12V/24V car outlets) to charge the power station. Full charge takes approximately 6-12 hours depending on the car's output.

Power station charging from a car's 12V/24V outlet — Car Input: 12V/24V Full Charge in 12 Hrs/6 Hrs

AC + Solar Dual Charging

For the fastest charging, combine AC and solar input. This method can achieve a full charge in approximately 45 minutes with a combined input of 1700W.

Power station charging from both AC and solar panels — AC+Solar Input: 1700W Full Charge in 45 Mins

3. Operating Instructions

3.1 Powering On/Off

Press and hold the main power button to turn the unit on or off. The display screen will illuminate, showing battery status and output information.

3.2 Connecting Devices

The P1000E PLUS offers various output ports to power a wide range of devices:

AC Outlets: Provides 1800W continuous power (up to 3600W peak) for household appliances.
USB Ports: For charging smartphones, tablets, and other USB-powered devices.
DC Ports: For 12V devices.
Type-C Ports: For fast charging compatible devices.

Simply plug your device into the appropriate port. Ensure the device's power consumption does not exceed the power station's output limits.

Power station powering multiple devices in a home setting — 1800W ultra-high output, capable of powering 99% of household devices

Power station surrounded by various household appliances — Versatile power for various devices

3.3 Uninterruptible Power Supply (UPS) Function

The P1000E PLUS features a seamless 1800W UPS function. When connected to an AC wall outlet and powering devices, if the grid power fails, the power station can automatically switch to battery power within 10 milliseconds. This prevents data loss for sensitive electronics like computers and ensures continuous operation for essential appliances.

Power station providing seamless UPS backup — Seamless 1800W UPS with < 10ms switchover time

3.4 Smart App Control

Control and monitor your power station remotely using the dedicated smartphone app. The app allows you to check battery status, control output ports, and manage settings from anywhere with Wi-Fi or Bluetooth connectivity.

Smartphone controlling the power station via app — Smart App Control for remote management

4. Maintenance

4.1 Battery Care

The P1000E PLUS uses a durable LiFePO4 battery, known for its long lifespan of up to 4000 cycles at 70% capacity, equating to approximately 10 years of use. To maximize battery life:

Avoid fully discharging the battery frequently.
Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
If storing for extended periods, charge the battery to around 50-80% every 3-6 months.

Transparent view of LiFePO4 battery cells — Reliable LiFePO4 Battery with long cycle life

4.2 Cleaning and Storage

Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Ensure all ports are free from dust and debris.
Store the power station in a well-ventilated area.

5. Troubleshooting

If you encounter issues with your OUKITEL P1000E PLUS, please refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Unit does not power on	Low battery; Power button not pressed long enough	Charge the unit; Press and hold the power button for 3-5 seconds
Devices not charging/powering	Output port not activated; Device power consumption too high; Cable issue	Ensure the specific output (AC/DC/USB) is turned on; Check device's power requirements; Try a different cable
Slow charging	Charging source insufficient; Environmental factors	Ensure AC charger is 1200W; Optimize solar panel angle; Charge in moderate temperatures
Abnormal noise or smell	Internal fault	Immediately power off the unit and contact customer support.

6. Specifications

Feature	Specification
Model	P1000E PLUS
Battery Capacity	1024Wh (51.2V)
Battery Type	LiFePO4 (Lithium Iron Phosphate)
Cycle Life	4000 cycles to 70% capacity
Rated AC Output	1800W (Pure Sine Wave)
Peak AC Output	3600W
UPS Function	Yes, <10ms switchover
AC Input (Charging)	1200W Max (AC100-120Vac Max15A)
Solar Input (Charging)	1* XT60 Port, 12V-50V / 15A, MPPT MAX 500W
Car Input (Charging)	12V/24V (via car charger, not included)
Controller Type	MPPT
Special Features	Two-Way Fast Charge, UPS, BMS, Smart App Control (Wi-Fi+Bluetooth)
Noise Level	< 29 dB (under 500W load)
Shell Material	ABS+PC
Dimensions (L x W x H)	13" x 8.7" x 9" (approx. 33cm x 22cm x 23cm)
Net Weight	12 kg
Certifications	CE

Dimensions of the OUKITEL P1000E PLUS — Dimensions: 13" Length, 8.7" Width, 9" Height

Infographic summarizing key features of the OUKITEL P1000E PLUS — Key Features Summary: Ultra-quiet, 12kg, 4000 cycles LiFePO4, 1024Wh, 1800W output, Smart App Control, 1800W UPS, 1200W AC Fast Charging, 500W Solar Input

7. User Tips

Solar Panel Compatibility: When using solar panels, ensure their total output does not exceed 500W. A 530W solar panel with 44.13 Voc and 15A Isc would exceed the maximum input and is not suitable for direct connection without proper regulation.
AC Plug Type: The unit typically comes with an EU AC plug for European markets. Please verify the plug type upon receipt to ensure compatibility with your local outlets.
Port Identification: Familiarize yourself with the various output ports (AC, DC, USB, Type-C, RV Port, Cigar Lighter, Air Compressor) on the device to ensure correct connection for your appliances.
Quiet Operation: The P1000E PLUS operates very quietly, especially under 500W load (less than 29 dB), making it ideal for indoor use or camping where noise is a concern.
Portability: Weighing only 12kg, the unit is designed for easy transport, making it convenient for outdoor adventures.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

For general return and refund policies, please refer to the seller's terms of service or visit their dedicated policy page.