1. Introduction
Thank you for choosing the EVERCROSSBOT Y10 Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. The Y10 is designed for efficient floor cleaning in swimming pools up to 120 square meters, featuring a 180-micron high-precision filter, a 40W motor, and a smart self-parking function. Its wireless design and IPX8 waterproof rating ensure a hassle-free and reliable cleaning experience.
Figure 1: EVERCROSSBOT Y10 Robotic Pool Cleaner
2. Important Safety Instructions
- Read all instructions carefully before operating the appliance.
- Ensure the charging port is dry before connecting the charger.
- Do not operate the cleaner if the power cord or charger is damaged.
- Keep children and pets away from the pool area during operation.
- Only use the provided charger and accessories.
- Do not attempt to repair the unit yourself. Contact qualified service personnel.
- Remove the cleaner from the pool before adding chemicals or performing maintenance.
- Store the cleaner in a cool, dry place when not in use.
3. Package Contents
Verify that all items are present in the package:
- EVERCROSSBOT Y10 Robotic Pool Cleaner (1 unit)
- Machine assembly brushes (1 set)
- Charger (1 unit)
- Filter cleaning brush (1 unit)
- Retrieval Rope (1 unit)
- Instruction Manual (1 unit)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | Y10 |
| Brand Name | EVERCROSS BOT |
| Origin | Mainland China |
| Cleaning Mode | Floor cleaning mode |
| Intelligent Self-Parking Function | Yes |
| Pool Type | Ground Pool, Underground Pool |
| Usable Pool Materials | PVC, tiles, vinyl or spray-coated |
| Cleaning Area | Up to 120 m² (1292 square feet) |
| Waterproof Rating | IPX8 |
| Maximum Working Depth | 2.5 m |
| Filter Precision | 180 µm |
| Garbage Capacity | 3 L |
| Maximum Creep Angle | 15 ° |
| Control Method | Button |
| Movement Method | Roll Type |
| Wireless Design | Yes |
| Product Size | 31.2 x 28.5 x 17.5 cm |
| Net Weight | 3 kg |
| Power | 40 W |
| Number of Engines | 1 |
| Battery Type | Lithium Battery |
| Battery Capacity | 2550 mAh |
| Battery Weight | 300 g |
| Number of Cells | 6 |
| Charging Power | 15V / 1A |
| Battery Life | Up to 100 minutes |
| Charging Time | 5-6 hours |
5. Setup
5.1 Initial Charging
- Before first use, ensure the pool cleaner is fully charged.
- Locate the charging port on the cleaner and ensure it is dry and free of debris.
- Connect the charger to the cleaner and then plug it into a power outlet.
- The charging indicator will show the charging status. A full charge typically takes 5-6 hours.
5.2 Preparing for Use
- Ensure the pool is free of large debris that could obstruct the cleaner.
- Check that the filter basket is clean and properly installed (refer to Maintenance section).
- Attach the retrieval rope to the designated point on the cleaner if you wish to easily retrieve it from the pool edge.
6. Operation
6.1 Starting the Cleaner
- Press the power button on the top of the cleaner to turn it on.
- Gently submerge the cleaner into the pool. It will begin to sink and start its cleaning cycle automatically.
Figure 2: Cleaner operating in the pool
6.2 Cleaning Cycle
- The Y10 is designed for floor cleaning and will navigate the pool floor to collect debris.
- A full cleaning cycle can last up to 100 minutes on a single charge.
6.3 Self-Parking Function
When the battery level is low, the EVERCROSSBOT Y10 will automatically move to the edge of the pool wall and dock itself for easy retrieval. This feature eliminates the need for manual intervention to locate and retrieve the cleaner when its battery is depleted.
Figure 3: Cleaner demonstrating self-parking function
6.4 Retrieving the Cleaner
Once the cleaning cycle is complete or the cleaner has self-parked, use the attached retrieval rope to gently pull the cleaner out of the water. Allow excess water to drain before removing it completely.
7. Maintenance
7.1 Cleaning the Filter Basket
Regular cleaning of the filter basket is crucial for optimal performance.
- After each use, remove the cleaner from the pool.
- Open the cleaner's housing to access the filter basket.
- Remove the filter basket and empty any collected debris.
- Use the provided filter cleaning brush and rinse the filter basket thoroughly with clean water until all debris is removed.
- Ensure the filter basket is completely dry before re-installing it.
Figure 4: Disassembling for filter cleaning
Figure 5: Filtration system components
7.2 General Care
- Wipe down the exterior of the cleaner with a soft, damp cloth after each use.
- Do not use harsh chemicals or abrasive cleaners.
- Store the cleaner in a shaded, dry area when not in use, especially during off-season.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not turn on | Low battery or no charge | Charge the cleaner fully (5-6 hours). |
| Cleaner moves slowly or inefficiently | Clogged filter basket or debris in motor/wheels | Clean the filter basket. Check for and remove any obstructions from the wheels or suction ports. |
| Cleaner does not sink | Air trapped inside the unit | Gently shake the cleaner underwater to release trapped air. Ensure it is fully submerged. |
| Cleaner stops mid-cycle | Low battery | The cleaner has entered self-parking mode due to low battery. Retrieve and recharge. |
| Cleaner does not cover entire pool floor | Pool size exceeds recommended area; Obstructions in pool | Ensure pool size is within 120 m². Remove any large obstacles from the pool. |
9. User Tips
- For best results, run the cleaner regularly to prevent excessive debris buildup.
- Always ensure the charging port is completely dry before connecting the charger to prevent damage.
- The self-parking feature is very convenient; make sure the retrieval rope is accessible when the cleaner docks.
10. Warranty and Support
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your proof of purchase for any warranty claims.
For technical support or service inquiries, please contact the EVERCROSS BOT customer service department through your retailer or the official support channels.