RIKA RK500-17

Contents

Rika RK500-17 Industrial Wastewater Chlorophyll Analyzer Meter Sensor

Instruction Manual

1. Product Overview

The Rika RK500-17 Chlorophyll sensor is an advanced optical instrument designed for continuous monitoring of chlorophyll levels in various aquatic environments. It features an integrated design, high-efficiency power management, and a robust structure, ensuring stable performance and long-term online use with minimal maintenance and calibration requirements.

This sensor is ideal for research, investigation, and monitoring applications in rivers, lakes, ponds, marine surveys, aquaculture, and drinking water sources, providing crucial data on algae and phytoplankton conditions.

Rika RK500-17 Chlorophyll Sensor main view

Figure 1: Rika RK500-17 Chlorophyll Sensor

Key Features:

  • IP68 protection, suitable for water depths up to 20 meters.
  • Built-in temperature sensor for comprehensive data collection.
  • Supports RS-485 communication with Modbus/RTU protocol.
  • Convenient, fast, stable, and easy to maintain operation.

Applications:

  • Aquaculture monitoring
  • General water quality monitoring
  • Study of algae and phytoplankton status

2. Specifications

Item Specification
Range 0~400 ug/L
Temperature Range 0-50 ℃
Accuracy ±3%, ±0.5 ℃
Resolution 0.1 ug/L, 0.1 ℃
Power 12-24VDC
Power Consumption <0.5W
Output RS485 (Modbus-RTU)
Main Material POM
Protection Class IP68
Deepest Depth 20m underwater
Cable Length 5 m (default), customizable

3. Setup

Before installation, ensure all components are present and undamaged. The RK500-17 sensor is designed for submersible applications and requires a stable power supply and a Modbus-RTU compatible data acquisition system or controller.

3.1 Package Contents:

  • RK500-17 Chlorophyll Sensor
  • Integrated cable (default 5m)
  • Instruction Manual (this document)
Rika RK500-17 Sensor in packaging box

Figure 2: Sensor as packaged

3.2 Physical Installation:

  1. Choose Location: Select a monitoring point in the water body that is representative of the area to be measured and allows for easy access for occasional inspection.
  2. Mounting: Securely mount the sensor in the desired position. Ensure the optical sensing window (refer to Figure 3) is fully submerged and free from obstructions. The sensor can be deployed vertically or horizontally.
  3. Cable Management: Route the sensor cable carefully to prevent damage. Avoid sharp bends, kinks, or placing the cable where it might be stepped on or abraded.
Rika RK500-17 Sensor tip with optical elements

Figure 3: Sensor tip with optical elements

3.3 Electrical Connection:

The RK500-17 sensor operates on 12-24VDC and communicates via RS485 (Modbus-RTU). Connect the sensor cable to your data acquisition system or controller according to the following wiring diagram (consult your system's manual for specific port assignments):

  • Power Supply: Connect the sensor's power wires to a stable 12-24VDC power source.
  • RS485 Data Lines: Connect the RS485 A and B data lines to the corresponding ports on your Modbus master device.
  • Ground: Ensure proper grounding to prevent electrical interference.
Rika RK500-17 Cable connection detail

Figure 4: Cable connection detail

Note: Specific wiring color codes should be confirmed with the product's physical labels or detailed technical documentation if available. Incorrect wiring can damage the sensor or connected equipment.

4. Operating Instructions

The RK500-17 is a continuous monitoring sensor. Once properly installed and powered, it will begin taking measurements. Data acquisition and interpretation are performed by the connected Modbus master device.

4.1 Data Acquisition:

  1. Power On: Apply 12-24VDC power to the sensor.
  2. Modbus Communication: Configure your Modbus master device (e.g., PLC, data logger, computer with Modbus software) to communicate with the RK500-17 sensor using the Modbus-RTU protocol.
  3. Register Mapping: Refer to the sensor's Modbus register map (typically provided in a separate technical document) to read chlorophyll concentration and temperature data.
  4. Data Logging/Display: Set up your system to log, display, and analyze the incoming data as required for your application.

The sensor provides real-time chlorophyll and temperature readings, allowing for continuous environmental assessment.

5. Maintenance

The RK500-17 sensor is designed for low maintenance and infrequent calibration. However, periodic inspection and cleaning are recommended to ensure optimal performance and accuracy, especially in environments with high biofouling or particulate matter.

5.1 Cleaning the Sensor:

  1. Disconnect Power: Always disconnect power to the sensor before handling or cleaning.
  2. Remove from Water: Carefully retrieve the sensor from its deployed location.
  3. Inspect: Visually inspect the optical sensing window (refer to Figure 3) for any accumulation of algae, biofilm, or debris.
  4. Gentle Cleaning: Use a soft cloth or brush and clean water (preferably distilled or deionized) to gently wipe the optical window. Avoid abrasive materials or harsh chemicals that could scratch or damage the sensor surface.
  5. Rinse and Dry: Rinse the sensor with clean water and allow it to air dry before redeploying or storing.

Note: Do not attempt to disassemble the sensor. Internal components are not user-serviceable.

6. Troubleshooting

If the sensor is not performing as expected, consider the following troubleshooting steps:

6.1 No Data Output:

  • Check Power: Verify that the sensor is receiving the correct 12-24VDC power supply.
  • Check Connections: Ensure all electrical connections (power and RS485) are secure and correctly wired.
  • Modbus Configuration: Confirm that your Modbus master device is correctly configured with the sensor's Modbus address, baud rate, and other communication parameters.
  • Cable Integrity: Inspect the sensor cable for any visible damage.

6.2 Inaccurate Readings:

  • Sensor Cleaning: Clean the optical sensing window as described in the Maintenance section (Section 5.1). Biofouling is a common cause of inaccurate readings.
  • Environmental Factors: Consider if extreme environmental conditions (e.g., very high turbidity, strong currents) might be affecting readings.
  • Recalibration: While designed for stability, if persistent inaccuracies occur after cleaning, consult technical support for potential recalibration procedures.

6.3 Physical Damage:

  • If the sensor body or cable shows signs of physical damage, discontinue use and contact technical support.

7. Warranty and Support

7.1 Warranty:

The Rika RK500-17 Chlorophyll Analyzer Meter Sensor comes with a 1-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or natural disasters.

7.2 Technical Support:

For technical assistance, troubleshooting, or warranty claims, please contact Rika customer support. When contacting support, please have your product model (RK500-17) and a detailed description of the issue ready.

Contact Information:
Email: 625103250@qq.com
Whatsapp: +86 19947288149

8. User Tips

No specific user tips were available from buyer reviews or Q&A content for this product. However, general best practices for optical water quality sensors include:

  • Optimal Placement: Position the sensor away from direct sunlight if possible, as intense light can sometimes interfere with optical measurements or promote faster biofouling.
  • Regular Checks: Even with low-maintenance design, periodic visual checks of the sensor's optical window can help identify and address biofouling before it significantly impacts data quality.
  • Data Validation: Periodically compare sensor readings with laboratory analysis of water samples to validate the accuracy of the online measurements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.