1. Introduction
Thank you for choosing the KYSPLOSION F30/422J 2-in-1 Cordless Electric Brad Nailer/Stapler Gun. This versatile tool is designed for various fastening tasks in home DIY, carpentry, and woodworking projects. It offers the convenience of cordless operation and compatibility with 18V/20V Dewalt and Makita style batteries (battery not included). This manual provides essential information for safe and efficient use, setup, operation, and maintenance of your new tool.
2. Safety Information
Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury.
- Read and understand all instructions before operating the tool.
- Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves.
- Ensure the workpiece is stable and secured before fastening.
- Keep hands and body parts away from the firing area and the nail discharge opening.
- Never point the tool at yourself or others.
- Disconnect the battery pack before making adjustments, clearing jams, or servicing the tool.
- Use only the recommended type and size of fasteners (18GA straight nails, 3/8" - 1-3/16" / 10-30mm).
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Store the tool in a secure, dry place out of reach of children.
3. Product Overview
Familiarize yourself with the components of your nailer/stapler gun:

- Safety Lock: Prevents accidental firing.
- Actuation Button: Engages the firing mechanism.
- Ergonomic Handle: Provides comfortable grip.
- Cooling Port: Helps dissipate heat during operation.
- Burst Fire Mode Indicator: Lights up when burst mode is selected.
- Trigger: Activates the firing sequence.
- Battery Level Display: Shows the remaining battery charge.
- Single Shot Mode Indicator: Lights up when single shot mode is selected.
- Sliding Magazine: Holds and feeds fasteners.
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | F30/422J |
| Type | Brad Nail Gun / Stapler Gun (2-in-1) |
| Power Source | Cordless Electric (Battery Powered) |
| Battery Compatibility | 18V/20V Dewalt and Makita style batteries (battery not included) |
| Nail Gauge | 18GA Straight Nails |
| Nail Length Range | 3/8" - 1-3/16" (10-30mm) |
| Firing Modes | Single Firing, Burst Firing |
| Application | Home DIY, Decoration, Home Furnishings, Carpentry, Woodworking Production |
| Battery Included | No |
| High-concerned Chemical | None |
| Origin | Mainland China |
5. Setup
Follow these steps to prepare your nailer/stapler gun for use:
- Insert Battery: Ensure the tool is switched off. Align your compatible 18V/20V Dewalt or Makita style battery with the battery slot and slide it in until it clicks securely into place.
- Load Fasteners:
- Operate the lever to release the loading mechanism of the sliding magazine.
- Place the 18GA straight nails (or staples) into the magazine, ensuring they are oriented correctly and lie flat at the bottom.
- Push the sliding magazine back until the snap locks securely into position.
- Check Fastener Size: Verify that the fasteners you are using are within the recommended range of 3/8" - 1-3/16" (10-30mm).



6. Operating Instructions
Once the tool is set up, follow these steps for operation:
- Power On: Press the power button to turn on the tool. The battery level display will illuminate, showing the current charge.
- Select Firing Mode: Use the mode selection button (often integrated with the power button or a separate switch) to toggle between "Single Shot Mode" and "Burst Fire Mode". The corresponding indicator light will illuminate.
- Single Shot Mode: Fires one fastener per trigger pull. Ideal for precision work.
- Burst Fire Mode: Fires fasteners continuously as long as the trigger is held down and the actuation button is pressed against the workpiece. Suitable for rapid fastening.
- Position the Tool: Place the nose of the tool firmly against the workpiece where you want to drive a fastener. Ensure the actuation button is fully depressed against the surface.
- Fire Fastener: Squeeze the trigger to drive a nail or staple.
- Monitor Battery Level: Keep an eye on the battery level display to ensure continuous operation. Recharge or replace the battery as needed.
- Power Off: After use, press the power button to turn off the tool and engage the safety lock.

Video 1: Demonstration of Nailer Gun Operation, showing loading and firing of the nailer gun.

7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your tool.
- Cleaning: Keep the tool clean and free of dust and debris. Use a dry cloth or compressed air to clean the housing and air vents.
- Magazine Inspection: Periodically inspect the nail magazine for any obstructions or damage. Ensure the sliding mechanism operates smoothly.
- Fastener Compatibility: Always use clean, undamaged fasteners of the correct size and type to prevent jams and tool wear.
- Battery Care: Store batteries in a cool, dry place. Do not expose them to extreme temperatures or moisture.
- General Inspection: Before each use, check for any loose screws, damaged parts, or signs of wear. Do not use the tool if it is damaged.
8. Troubleshooting
If you encounter issues with your nailer/stapler gun, try the following:
- Tool Not Firing:
- Check if the battery is fully charged and properly inserted.
- Ensure the safety lock is disengaged.
- Verify that the actuation button is fully depressed against the workpiece.
- Check if the magazine is loaded with fasteners and securely closed.
- Fasteners Not Driving Fully:
- Ensure the battery has sufficient charge.
- Check if the fasteners are the correct size and type for the material.
- Ensure the tool is held firmly against the workpiece.
- Jammed Fasteners:
- ALWAYS disconnect the battery before clearing a jam.
- Open the magazine and carefully remove any bent or jammed fasteners.
- Inspect the firing mechanism for any obstructions.
- Close the magazine securely and re-insert the battery.
9. User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your experience with the KYSPLOSION F30/422J:
- Battery Management: Keep spare charged batteries on hand for uninterrupted work, especially during larger projects.
- Material Testing: Before working on your main project, test the nailer on a scrap piece of the same material to adjust depth and ensure proper fastening.
- Mode Selection: Utilize the "Single Shot Mode" for precise applications like trim work, and switch to "Burst Fire Mode" for faster, less critical tasks like sheathing or subflooring.
- Cleanliness: Regularly clean the magazine and firing pin area to prevent dust and debris buildup, which can cause jams.
- Storage: Store the tool and batteries in a climate-controlled environment to prolong their lifespan.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller, XP Tools Store, directly through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.