1. Introduction
Thank you for choosing the Redragon M991 Wireless Gaming Mouse. This high-performance gaming mouse offers versatile connectivity options, precise tracking, and customizable features to enhance your gaming and productivity. Please read this manual carefully to ensure proper setup and optimal use of your device.

2. Package Contents
Ensure all items are present in your package:
- Redragon M991 Wireless Gaming Mouse
- USB 2.4Ghz Receiver (dongle)
- USB-C Charging Cable
- User Manual (this document)
3. Setup and Connection
The Redragon M991 offers three connection modes: 2.4Ghz Wireless, Bluetooth (BT), and Wired (USB-C).

3.1. 2.4Ghz Wireless Connection
- Locate the USB 2.4Ghz receiver (dongle) in the package.
- Plug the USB receiver into an available USB port on your computer.
- Turn on the mouse using the power switch located on the bottom of the mouse.
- The mouse should automatically connect to your computer.
3.2. Bluetooth (BT) Connection
- Turn on the mouse and switch it to Bluetooth mode (refer to the switch on the bottom of the mouse, if available, or consult the PDF manual for specific instructions).
- On your computer, go to Bluetooth settings and search for new devices.
- Select "Redragon M991" from the list of available devices to pair.
3.3. Wired Connection
- Connect the USB-C end of the charging cable to the mouse.
- Connect the USB-A end of the cable to an available USB port on your computer.
- The mouse will function as a wired mouse and will also charge its battery.
3.4. Software Installation
To unlock the full customization potential of your M991 mouse, including DPI redefinition, macro programming, and RGB lighting effects, download and install the Redragon Pro driver software from the official Redragon website. The PDF manual also contains instructions for software operation.

4. Operating Instructions
4.1. Button Functions
The M991 features 9 freely programmable buttons. These can be customized via the Redragon Pro software.

- Left/Right Click: Standard mouse functions.
- Scroll Wheel: Scroll up/down, middle click.
- DPI +/- Buttons: Adjust DPI levels (default settings).
- Side Buttons: Typically used for forward/backward navigation, but fully programmable.
- Rapid Fire Shortcut: A dedicated button for quick, repeated actions, customizable via software.
4.2. DPI Adjustment
The mouse comes with 6 on-board DPI levels (1000/2000/4000/8000/13000/26000). You can cycle through these levels using the dedicated DPI buttons. For a wider range (50-26000 DPI) and fine-tuning, use the Redragon Pro driver software.

4.3. Polling Rate
The M991 supports a 1000Hz Polling Rate in dual mode, ensuring quick response times. Polling rate can often be adjusted via the software to suit your preferences (e.g., 125Hz, 250Hz, 500Hz, 1000Hz).
4.4. RGB Lighting
Customize the RGB backlight with various effects such as dynamic streaming, breathing, and waving using the Redragon Pro driver. The lighting can be adjusted to match your gaming setup and mood.
4.5. Macro Programming
Utilize the Redragon Pro software to program macros for any of the 9 buttons. This allows you to assign complex sequences of commands or keystrokes to a single button, providing a significant advantage in games or for repetitive tasks.
5. Maintenance
5.1. Cleaning
To clean your mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the mouse's internal components. Avoid using harsh chemicals or abrasive materials.
5.2. Battery Charging
The M991 features a 1000mAh rechargeable battery. To charge, connect the mouse to your computer using the provided USB-C cable. The mouse will indicate when it is charging and when it is fully charged. A full charge typically takes about 5 hours. The battery life is up to 240 hours with RGB lighting off, and approximately 17 hours with RGB lighting on.

6. Troubleshooting
- Mouse not responding: Ensure the mouse is turned on and properly connected (either via USB receiver, Bluetooth, or wired). Check battery level and charge if necessary. Try a different USB port or restart your computer.
- Lag or disconnections in wireless mode: Ensure the USB receiver is close to the mouse and not obstructed. Avoid interference from other wireless devices. If using Bluetooth, ensure your computer's Bluetooth is enabled and updated.
- DPI or button settings not working: Make sure the Redragon Pro software is installed and running. Ensure you have saved your settings within the software.
- RGB lighting not working: Check software settings for lighting effects. Ensure the mouse battery has sufficient charge.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | REDRAGON |
| Model | M991 |
| Type | 2.4Ghz Wireless (3-Mode Connection: 2.4Ghz, BT, Wired) |
| Sensor Model | Pixart 3395 |
| DPI | Up to 26000 (Adjustable via software, 6 on-board levels) |
| Movement Speed (IPS) | 650 |
| Acceleration | 50 G |
| Battery Capacity | 1000mAh |
| Battery Included | Yes |
| Polling Rate | 1000Hz (Max) |
| Programmable Buttons | 9 |
| Switch Lifespan | 20 Million Clicks |
| Package | Yes |
| Origin | Mainland China |
8. User Tips
- For competitive gaming, always ensure your mouse is fully charged or connected via wired mode to avoid unexpected power loss.
- Experiment with different DPI and polling rate settings in the software to find what feels most comfortable and responsive for your playstyle and screen resolution.
- Take advantage of the macro programming feature for complex in-game actions or to streamline repetitive tasks in productivity applications.
- Regularly check the Redragon official website for updated software drivers to ensure optimal performance and access to new features.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official Redragon website or contact their customer service directly. You can also find the full user manual in PDF format at Redragon M991 User Manual (PDF).