FLIPSKY VX5

Contents

Flipsky VX5 IP68 Waterproof Remote Control User Manual

Model: VX5

1. Introduction

The Flipsky VX5 is a newly designed IP68 waterproof remote control engineered for electric surfboards and electric skateboards. It features a high-resolution display, integrated GPS/GNSS for accurate speed measurement, and a long-lasting 5000mAh battery. This manual provides detailed instructions for setting up, operating, and maintaining your VX5 remote control.

2. Features

2.1 Hardware Features

  • Waterproof Rating: IP68, ensuring robust protection against water ingress.
  • Positioning Modules: High-precision integrated Beidou, GPS, and GNSS for accurate speed measurement.
  • Display: High-resolution screen for clear and detailed information display.
  • Battery: Built-in 5000mAh high-quality battery cells, providing up to 20 hours of continuous use.
  • Battery Meter: High-precision battery meter for accurate battery level display.
  • Ergonomics: Compact design with ergonomically laid-out buttons for comfortable operation.
  • Throttle Control: Built-in high-precision encoder chip for precise throttle control.
  • Accessory Mount: Built-in M6 nuts on the bottom for easy attachment of accessories like flashlights or cameras.
  • Buoyancy: Large internal cavity design allows the remote to float, preventing it from sinking.

2.2 Software Features

  • User Interface: New cool control interface.
  • Multilingual Support: Supports Chinese, English, and Russian display.
  • Time Calibration: GPS automatic time calibration.
  • Data Records: Supports up to 11 riding data records.
  • ESC Fault Alarms: Records up to 20 ESC fault alarm codes.
  • Throttle Settings: L, M, H three-gear throttle percentage settings.
  • Throttle Lock: Various remote control throttle auto-lock modes.
  • Surfboard Mode: Multi-gear mode with up to 20 gears.
  • ESC Compatibility: Supports VESC, FTESC, FOCBOX, PPM, and other control protocols.
  • Real-time Data: Real-time data display.
  • Satellite Display: Satellite number display.
  • Firmware Updates: Supports firmware online upgrade.
  • Throttle Customization: Throttle curve preset and throttle response time preset.
  • Charging Display: Real-time display of charging power.
  • One-key Mode Switching (for FTESC ESC): Normal mode, tank turnaround mode, hill climbing cross-country mode, traction control mode.

3. Product Overview

Familiarize yourself with the physical components and display elements of your VX5 remote control.

3.1 Remote Control Layout

Flipsky VX5 Remote Control with labeled buttons and ports
Figure 1: VX5 Remote Control with labeled components.
  • Brake Trigger: Controls braking.
  • Mode Button: Cycles through different operating modes.
  • Horn Button: Activates the horn function.
  • Setting Button: Accesses settings and menu options.
  • Power On/Off Throttle Trigger: Powers the device on/off and controls acceleration.
  • 2 Inches Display Screen: High-resolution screen for displaying operational data.
  • USB Magnetic Charging Port: For charging the remote control.

3.2 Display Screen Information

The VX5 remote features a comprehensive display that provides real-time data. The layout may vary slightly between Surfing Mode and E-skateboard Mode.

Surfing Mode Display Screen Icon Introduction
Figure 2: Surfing Mode Display Screen. Shows Receiver signal quality, Number of GPS Satellites, Time, Motor Steering, Remote Battery, Surfingboard Battery, Surfing Mode, Speed Gear, Throttle Auto-locking Time, Throttle Progress Bar, Working Record Time, Throttle Percentage, Realtime Speed, Speed Unit, TRIP, ODO, BAT.Voltage, MOT.TEMP, BAT.Current, MOT.Current, Duty.
E-skateboard Mode Display Screen Icon Introduction
Figure 3: E-skateboard Mode Display Screen. Shows Receiver signal quality, Number of GPS Satellites, Time, Motor Steering, Remote Battery, Eboard Woring Mode, Eboard Battery, Eboard Mode, Headlight, High Speed (Red), Medium Speed (Yellow), Low Speed (Green), Throttle Auto-locking Time, Throttle Progress Bar, Working Record Time, Throttle Percentage, Realtime Speed, Speed Unit, TRIP, ODO, BAT.Voltage, MOT.TEMP, BAT.Current, MOT.Current, Duty.

4. Setup

4.1 Receiver Connection

The VX5 remote supports various ESCs and connection modes. Refer to the diagram below for proper wiring.

PPM Control Mode and PPM Dual Channel Connection Mode Wiring Diagram
Figure 4: Receiver Connection Diagram.

PPM Control Mode: Connect the receiver to a single ESC. This mode does not support forward and reverse switching functions and is applicable to all ESCs. Ensure BAT+, VRX2, VTX2, VRX1, VTX1, GND, 5V, and PPM connections are made correctly.

PPM Dual Channel Connection Mode: For setups with two ESCs (ESC1 and ESC2). This mode also does not support forward and reverse switching functions. Connect PPM1 to ESC1 and PPM2 to ESC2. Ensure BAT+, VRX2, VTX2, VRX1, VTX1, GND, 5V, PPM1, and PPM2 connections are made correctly.

4.2 Initial Pairing

Specific pairing instructions may vary depending on your ESC. Generally, ensure both the remote and your electric surfboard/skateboard are powered off. Follow your ESC's manual for entering pairing mode, then activate the remote's pairing sequence (often by holding a specific button during power-on or via the settings menu). Once paired, test all controls (throttle, brake, mode switching) before use.

5. Operating Instructions

5.1 Power On/Off

Press and hold the Power On/Off Throttle Trigger to power the remote on or off.

5.2 Throttle and Braking

  • Throttle Control: Use the Power On/Off Throttle Trigger to control acceleration. The high-precision encoder chip ensures precise control.
  • Brake Control: Use the Brake Trigger for braking.
  • Throttle Settings: Adjust throttle percentage settings (L, M, H gears) via the remote's menu to suit your riding style. You can also preset throttle curves and response times.
  • Auto-lock Modes: The remote supports various throttle auto-lock modes for safety and convenience.

5.3 Mode Switching

  • General Modes: Use the Mode Button to cycle through available operating modes (e.g., Surfing Mode, E-skateboard Mode).
  • FTESC ESC Specific Modes: If using an FTESC ESC, the remote supports one-key switching between Normal mode, Tank Turnaround mode, Hill Climbing Cross-Country mode, and Traction Control mode.

5.4 Display Information

The high-resolution display provides critical real-time data:

  • Real-time speed and speed unit (Km/h or Mph).
  • Battery levels for both the remote and the e-board.
  • GPS satellite count and signal quality.
  • Current operating mode (e.g., NORMAL, Surfing Mode, E-skateboard Mode).
  • Trip distance (TRIP) and total odometer (ODO).
  • Battery voltage (BAT.Voltage), motor temperature (MOT.TEMP), battery current (BAT.Current), motor current (MOT.Current), and duty cycle.
  • Working record time and throttle progress bar.
  • ESC fault alarm codes (up to 20 can be stored).
  • Real-time charging power display when connected to a charger.

5.5 Settings and Calibration

  • Language Selection: Navigate through the settings menu using the Setting Button to select your preferred language (Chinese, English, Russian).
  • GPS Time Calibration: The remote supports automatic time calibration using GPS signals.

6. Maintenance

6.1 Cleaning and Waterproofing

The VX5 remote has an IP68 waterproof rating, meaning it is protected against continuous immersion in water. After use in water, rinse the remote with fresh water and dry it thoroughly, especially around the charging port, to prevent corrosion.

6.2 Charging

Charge the remote using the USB Magnetic Charging Port. Ensure the port is clean and dry before attaching the magnetic charger. The display will show real-time charging power.

6.3 Firmware Updates

The remote supports online firmware upgrades. Periodically check the official Flipsky website or app for new firmware versions to ensure optimal performance and access to new features. Follow the provided instructions carefully during the update process.

7. Troubleshooting

7.1 ESC Fault Alarm Codes

The remote can store up to 20 ESC fault alarm codes. If you experience issues, check the display for any active fault codes. Refer to your ESC's manual for the meaning of specific codes and recommended troubleshooting steps.

7.2 Connectivity Issues

  • If the remote loses connection, ensure both the remote and the e-board are powered on and within range.
  • Check the receiver connections as per the wiring diagram (Figure 4).
  • Attempt to re-pair the remote with your ESC if connection issues persist.

7.3 Display Not Working

  • Ensure the remote is sufficiently charged.
  • If the display is unresponsive, try restarting the remote.

8. Specifications

FeatureSpecification
ModelVX5
Waterproof RatingIP68
Battery Capacity5000mAh
Continuous Use TimeUp to 20 hours
Display Screen Size2 inches (High Resolution)
Positioning ModulesBeidou, GPS, GNSS
Supported ESC ProtocolsVESC, FTESC, FOCBOX, PPM
Dimensions (Height x Length x Width)188mm x 146.4mm x 67.5mm
WeightApprox. 0.9 kg
Flipsky VX5 Remote Control Dimensions
Figure 5: VX5 Remote Control Dimensions.

9. User Tips

  • Always perform a pre-ride check of your remote's battery level and connectivity to your e-board.
  • Familiarize yourself with the different throttle percentage settings (L, M, H) to match your skill level and riding environment.
  • Utilize the data logging features to track your rides and analyze performance.
  • Keep the magnetic charging port clean to ensure reliable charging and maintain the IP68 waterproof seal.

10. Warranty and Support

10.1 Warranty Policy

The warranty period for consumable electronic products (e.g., ESC/Motor/Battery) is 2 months from the 7th day after shipment (shipping date checked by logistic record). For non-electronic products, the warranty period is also 2 months from the 7th day after shipment.

Conditions Not Covered by Warranty:

  • Lack of purchase channel source proof.
  • Mechanical damage to electronic components or PCB.
  • PCB board has repair soldering iron traces (excluding solder the cable bullet connectors).
  • Water damage or external impact damage beyond product specifications.
  • Abnormal applications beyond the product specifications.
  • Products purchased not from the official Flipsky store.

For group-buy orders, the warranty period is based on the 7th day after the group-buy order's shipment. If there's any quality issue, please provide the after-sales warranty card number (which is shipped in your product package). Keep it well.

For products transferred by a second-hand transaction, the warranty is invalid.

10.2 Contact Support

For any questions, technical assistance, or warranty claims, please contact Flipsky service at: flipsky_service@outlook.com. Please provide your original source order number or warranty card number when contacting support.

Flipsky After-Sale Service Policy
Figure 6: After-Sale Service Policy details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.