ROBORE CW1F

Contents

ROBORE CW1F Walking Pad User Manual

Model: CW1F

Introduction

The ROBORE CW1F Walking Pad is a versatile and compact fitness device designed for home and office use. Featuring a 9% adjustable incline, a powerful 2.5HP brushless motor, and a maximum speed of 12 KM/H, it supports users up to 136kg. Its foldable design allows for easy storage, making it an ideal solution for small spaces. This manual provides essential information for the safe and effective setup, operation, and maintenance of your walking pad.

ROBORE CW1F Walking Pad in an upright position
Figure 1: Overview of the ROBORE CW1F Walking Pad.

Setup

Before using your ROBORE CW1F Walking Pad, please ensure all components are present and follow these setup instructions carefully.

Package Contents:

  • 1 x ROBORE CW1F Treadmill
  • 1 x Safety Key
  • 1 x Toolkits (for minor assembly/adjustments)
  • 1 x User Manual (this document)

Unfolding and Positioning:

  1. Carefully remove the walking pad from its packaging.
  2. Place the walking pad on a flat, stable surface. Ensure there is adequate clear space around the unit for safe operation (at least 0.6 meters on all sides).
  3. Unfold the treadmill by lifting the handlebar until it locks securely into place. Refer to the product images for the fully unfolded configuration.
  4. Ensure all locking mechanisms are engaged before use.
  5. Connect the power cord to a grounded electrical outlet.
ROBORE CW1F Walking Pad in its fully folded state
Figure 2: The ROBORE CW1F Walking Pad in its compact, folded state.

Operating Instructions

Familiarize yourself with the controls and features of your ROBORE CW1F Walking Pad for an optimal workout experience.

Safety Key:

  • Always attach the safety key clip to your clothing before starting your workout. The treadmill will not operate without the safety key in place.
  • In case of an emergency, pulling the safety key will immediately stop the treadmill.

Starting a Workout:

  1. Step onto the treadmill belt.
  2. Insert the safety key into its designated slot on the console.
  3. Press the START button to begin. The treadmill will typically start at a low speed.
  4. Adjust the speed using the '+' and '-' buttons on the console. The maximum speed is 12 KM/H.

Adjusting Incline:

The ROBORE CW1F features a 9% adjustable incline to simulate varied terrain and increase workout intensity. Consult your console for specific incline adjustment controls. Increasing the incline can significantly boost calorie expenditure.

User exercising on the ROBORE CW1F Walking Pad, demonstrating the 9% incline feature
Figure 3: Demonstrating the 9% incline feature during a workout.
Visual comparison of calorie burn at 0% incline versus 9% incline
Figure 4: Calorie burn comparison between 0% and 9% incline.

Workout Modes:

The walking pad offers three distinct working modes to suit various fitness levels and goals:

  • Working 1-3 km/h: Ideal for light walking or active standing.
  • Working 4-6 km/h: Suitable for brisk walking.
  • Working 7-12 km/h: Designed for light jogging or running.
Diagram illustrating the three working modes (1-3km/h, 4-6km/h, 7-12km/h) of the treadmill
Figure 5: Three working modes of the ROBORE CW1F Walking Pad.

LED Display:

The intuitive LED display provides real-time feedback on your workout, including:

  • Time elapsed
  • Current speed
  • Distance covered
  • Calories burned

Stopping a Workout:

Press the STOP button on the console. The treadmill will gradually slow down and come to a complete stop. Alternatively, pull the safety key for an immediate stop.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your ROBORE CW1F Walking Pad.

Cleaning:

  • Wipe down the treadmill surface and console with a damp cloth after each use. Avoid using abrasive cleaners or solvents.
  • Keep the area around the treadmill clean and free of dust and debris.

Running Belt Lubrication:

The running belt requires periodic lubrication to reduce friction and extend its lifespan. Refer to your toolkit for the appropriate lubricant and follow the instructions provided with the lubricant for application frequency and method.

Motor Care:

The ROBORE CW1F is equipped with a brushless motor, which offers lower maintenance compared to brushed motors. This design contributes to a longer lifespan and quieter operation.

Comparison chart detailing the benefits of a brushless motor over a brushed motor
Figure 6: Brushless Motor vs. Brushed Motor comparison.

Troubleshooting

If you encounter any issues with your ROBORE CW1F Walking Pad, refer to the following common troubleshooting steps:

  • Treadmill does not start: Ensure the power cord is securely plugged into a grounded outlet and the safety key is correctly inserted into its slot. Check if the power switch (if present) is in the 'ON' position.
  • Belt slipping or uneven movement: The running belt may require adjustment or lubrication. Refer to the maintenance section and the toolkit instructions.
  • Unusual noises: Stop the treadmill immediately. Check for any foreign objects caught in the belt or motor area. If the noise persists, discontinue use and contact customer support.
  • Display not working: Check power connections. If the issue persists, contact customer support.

For issues not covered here, please contact customer support for assistance.

Specifications

CategorySpecification
BrandROBORE
TypeTreadmill
ModelCW1F
ColorBlack
Style9% Incline
Motor2.5HP Brushless Motor
Max Speed12 KM/H
Load Capacity136 kg
Product Weight17.5 kg
Package Weight22 kg
Product Size (L x W x H)105 x 50 x 100 cm
Package Size (L x W x H)128 x 58 x 13 cm
Running Belt Length80-120 cm
Running Belt Width50-80 cm
Adjustable SlopeYes
ScreenNo
With SpeakersNo
Bluetooth ConnectionNo
Training SiteLegs, Muscle Relex Apparatus, Foot
FoldableYes
Type of SportsCardio Training

Warranty and Support

Warranty information for the ROBORE CW1F Walking Pad is typically provided by the seller or manufacturer at the time of purchase. Please refer to your purchase documentation or contact the retailer directly for details regarding warranty coverage, terms, and conditions.

For technical support, spare parts, or further assistance, please contact the customer service department of your point of purchase. When contacting support, please have your model number (CW1F) and purchase date available.

User Tips

  • Vary Your Workouts: Utilize the 9% incline feature and the different speed modes (1-3km/h for walking, 4-6km/h for brisk walking, 7-12km/h for jogging) to keep your workouts engaging and target different muscle groups.
  • Quiet Operation: The brushless motor operates at less than 45 dB, making it suitable for use in shared living spaces or while working without causing significant disturbance.
  • Space-Saving Storage: Take advantage of the fully foldable design to store the walking pad under a desk or sofa when not in use, maximizing your living space.
  • Stay Hydrated: Always keep a water bottle nearby during your workout.
  • Listen to Your Body: If you experience pain or discomfort, stop your workout immediately.

© 2023 ROBORE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.