Redragon K722 60% Wired Gasket RGB Gaming Mechanical Keyboard

1. Introduction

The Redragon K722 is a compact 60% wired mechanical gaming keyboard designed for performance and a comfortable typing experience. It features a gasket-mounted design, hot-swappable switches, triple-layer noise dampening, and customizable RGB lighting. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your keyboard.

2. Setup Guide

1. Unpacking: Carefully remove the keyboard and its accessories from the packaging. Ensure all components are present: Redragon K722 keyboard, USB-C to USB-A cable.
2. Connecting the Keyboard:
   • Locate the USB-C port on the back or side of the keyboard.
   • Connect the USB-C end of the provided cable to the keyboard.
   • Connect the USB-A end of the cable to an available USB port on your computer (Desktop, Laptop, etc.).

   

3. Driver Installation: The keyboard is plug-and-play for basic functionality. For advanced customization (RGB effects, macros), download the dedicated software from the official Redragon website.
4. Initial Use: Once connected, your computer should automatically recognize the keyboard. You can begin typing immediately.

3. Operating Instructions

3.1 Basic Key Functions

The K722 features a 61-key compact layout. Many functions are accessed via the 'Fn' key combined with other keys. Refer to the keycaps for secondary functions (e.g., F-keys, arrow keys, multimedia controls).

3.2 RGB Lighting Control

The keyboard features dynamic RGB backlighting. Lighting modes and effects can typically be cycled through using specific key combinations (e.g., Fn + \| key) or customized extensively via the Redragon software.

3.3 Gasket Mount Design

The gasket-mounted design provides a softer, more flexible typing feel and reduces harsh bottom-out sounds. This contributes to a crisp, clean, and comfortable acoustic profile for each keystroke.

3.4 Noise Dampening

The K722 incorporates three layers of noise dampening: 3.5mm PO foam, IXPE switch foam, and bottom socket foam, along with a silicone gasket. These layers work together to significantly reduce hollow sounds and improve typing acoustics.

3.5 Software Customization

Utilize the Redragon Pro Software to:

• Design custom RGB lighting modes and effects.
• Program macros for specific keybindings or shortcuts.
• Remap keys for personalized workflow or gaming.

4. Maintenance

4.1 Cleaning

• Disconnect the keyboard from your computer before cleaning.
• Use a soft, dry cloth to wipe down the keycaps and chassis.
• For deeper cleaning, use a can of compressed air to remove dust and debris from between the keycaps.
• For stubborn stains, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the keyboard.

4.2 Hot-Swappable Switches

The K722 features hot-swappable switches, allowing you to change mechanical switches without soldering. This supports 99.8%+ of compatible 3-pin and 5-pin mechanical switches.

1. Removing Keycaps: Use a keycap puller to gently remove the desired keycap.
2. Removing Switches: Use the provided switch puller tool to carefully grip the top and bottom clips of the switch and pull it straight up.
3. Installing Switches: Align the pins of the new switch with the holes on the PCB. Gently press the switch down until it clicks into place. Ensure the pins are not bent.
4. Installing Keycaps: Place the keycap over the switch stem and press down firmly until it is seated.

5. Troubleshooting

• Keyboard Not Responding:
  • Ensure the USB cable is securely connected to both the keyboard and the computer.
  • Try connecting the keyboard to a different USB port on your computer.
  • Test the keyboard on another computer to rule out a computer-specific issue.
• RGB Lighting Not Working/Incorrect:
  • Check if the lighting is turned off or set to a static mode via keyboard shortcuts.
  • Ensure the Redragon software is installed and updated to the latest version.
  • Reset the keyboard to factory defaults (refer to software or Redragon support for specific instructions).
• Keys Not Registering:
  • If a specific key is not working, try removing and re-seating its switch (due to hot-swap feature).
  • Ensure no debris is lodged under the keycap or switch.
  • If multiple keys fail, try updating keyboard firmware via the Redragon software.
• Software Issues:
  • Reinstall the Redragon software.
  • Ensure your operating system is up to date.
  • Temporarily disable antivirus software during installation if issues persist.

6. Specifications

7. Warranty and Support

Redragon products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact the Redragon Gaming Store or visit their official website. Keep your proof of purchase for any warranty claims.

8. User Tips

• Experiment with Switches: Take advantage of the hot-swap feature to try different mechanical switches that suit your typing or gaming preference.
• Customize RGB: Dive into the Redragon software to create unique lighting profiles that match your setup or mood.
• Macro Efficiency: Program frequently used key combinations or complex actions into macros for increased efficiency in gaming or productivity tasks.
• Keep it Clean: Regularly clean your keyboard to prevent dust and debris from affecting switch performance and keycap aesthetics.