1. Introduction
Thank you for choosing the Irradio UV-98 PLUS GPS APRS Walkie Talkie. This advanced multi-band radio is designed for reliable communication across various frequencies, featuring GPS and APRS for real-time location sharing, a cross-band repeater, and a large color screen. This manual provides essential information for safe and effective operation of your device.
2. Safety Precautions
Please observe the following precautions to prevent fire, personal injury, equipment damage, or other accidents:
- Do not use the equipment in inflammable or explosive environments (e.g., gas, dust, smoke). Turn off the equipment when refueling or parking at a gas station.
- Do not place the equipment in dusty, wet, or splashed places, or on uneven surfaces.
- Use this equipment away from interference sources (e.g., TV, computer, distribution cabinet).
- Do not transmit while charging.
- Do not expose the device to direct sunlight for a long time or place it near heating devices.
- If the equipment emits an abnormal odor, turn it off immediately. After ensuring safety, send it to the nearest maintenance site for inspection.
- Do not modify or adjust this equipment for any reason.
- Always obey local laws and regulations.
- The customer is responsible for equipment failure or accidents caused by violating these precautions.
3. Package Contents
Upon unboxing, please verify that all the following accessories are included and in good condition. If anything is missing or damaged, contact your local distributor.
| No. | Item | Quantity |
|---|---|---|
| 1 | Radio | 1 |
| 2 | Antenna | 1 |
| 3 | Li-ion Battery | 1 |
| 4 | Charger | 1 |
| 5 | Belt Clip | 1 |
| 6 | User Manual | 1 |
| 7 | Guarantee Card | 1 |
Visual representation of the packing details:

The radio unit and individual components: base charger, charger, battery, Type-C charger, clip, user manual, antenna, and lanyard.
4. Product Overview
4.1 Key Features
- 1024 channels and three VFO channels
- Triple frequency standby function
- Cross Band Repeater
- Triple PTT transmission
- S9+field strength indicator, real-time display of field strength values
- One-click frequency measurement and remote sub-tone scan
- Customizable keyboard and side key functions.
- Two emission end tones and MDC end tones
- Manually editable device name (can be used as call sign, MDC transmission and decoding)
- Manually editable channel names in both Chinese and English
- 11 NOAA weather forecast channels (available only in the United States)
- Receives aviation AM signals, frequency range 108-136MHz
- Power-saving mode, gradually deepens power saving ratio over time when enabled
- Frequency scan and channel scan functions
- Spectrum scanning function
- VOX function (Voice Activated Transmit)
- Monitoring function
- Emergency alarm function.
- Editable single-tone transmission (The 1750 Hz tone can wake up the repeater.)
- Customize the startup logo and prompt.
- DTMF encoding transmission
- DTMF remote dizziness and remote death wake-up
- Type-C charging function, Base+Type-C Two charging methods.

A comprehensive list of features of the Irradio UV-98 PLUS walkie-talkie.
4.2 Radio Diagram

Labeled diagram pointing out the Short/Medium/Long Wave FM Antenna, ON/OFF/Volume Knob, Indicator, Alarm button, Launch key, Side key 1, Side key 2, Menu Function Area, Type-C Charger, and Keypad.
4.3 LCD Display Overview

Close-up of the 2.4-inch TFT HD large color screen display, illustrating VFO mode, VOX (Voice Activated Transmit) function, S9+field strength indicator, and triple frequency waiting capability.
The LCD display shows various indicators and information:
- Keyboard Lock
- Prompt Tone
- Scan
- RR Talkaround/TR Reverse Frequency
- Multi-Frequency Standby
- VOX
- GPS
- Cross-Band Relay
- Battery Icon
- Multi-PTT Enable
- Received Signal Strength
- Received Signal Field Strength Value
- High Power / Low Power switchable
- CTCSS/DCS / MUT Non-standard DCS / ENC Encrypted DCS
- W/N band switchable
- FM/AM RX
- CH-XXXX Channel Number in Channel Mode / ZONE-XXX Zone Number in Zone Mode
- Working Frequency / Working Channel
- Main Frequency Area Indicator Icon
- Channel Name
- Working Frequency Range
- A/B/C Main Frequency Area
- Received Signal Meter
5. Setup Instructions
5.1 GPS and APRS Function Setup
The Irradio UV-98 PLUS features built-in GPS and APRS for transmitting and receiving positioning data.
Demonstration of setting up and using GPS and APRS functions on the Irradio UV-98 PLUS walkie-talkie, including menu navigation for GPS and APRS settings, beacon setup, PTT After configuration, and setting a shortcut key for GPS. Shows location sharing and successful GPS positioning indicated by a green icon.
- Step 1: Configure GPS
- Enter the menu, select "Extend (Optional)".
- Select "GPS" and turn "GPS On-off" to ON.
- Set "GPS Baudrate" and "UTC Zone" according to your region.
- Adjust "Coordinate Type", "Speed Unit", "Distance Unit", and "Altitude Unit" as needed.
- Step 2: Configure APRS
- From "Extend (Optional)", select "APRS" and turn "APRS On-off" to ON.
- Set "Station Mode" to GPS.
- In "Beacon Setup", configure SSID, Symbol Table, Symbol, and Comment as needed.
- Set "Path 1" and "Path 1 Count" for transmission path.
- Step 3: Configure Beacon Mode
- Enter "Beacon Mode".
- Select "PTT After" and choose "APRS After CH" according to your needs.
- Set "Time Mode" and "Timed Time (S)" for beacon transmission intervals.
- Configure "APRS RX CH" and "APRS TX CH" according to requirements.
- Finally, enable "Beacon Pop-up" to ON.
- Step 4: Set a Shortcut Key for GPS
- Go to "Key Define" in the menu.
- Assign a shortcut key (e.g., "Side Key 2 L") to "GPS" function for quick access.
5.2 Frequency Input
- Press the # key to switch the working mode to VFO Frequency Mode.
- Use the numeric keypad to input the frequency value. Enter 6 or 8 digits to complete the operation.
- In [Radio Settings] -> [Frequency Input Mode], selecting [End with 0] allows input with 6 digits, while [Full Input] requires 8 digits.
5.3 Repeater Frequency Input
Method 1:
- Go to [Channel Settings] -> [Offset Frequency], and use the numeric keypad to input the offset frequency.
- Go to [Channel Settings] -> [Offset Direction] to set positive or negative offset.
Method 2:
- In standby mode, long press the # key to enter the [Transmit Frequency] menu.
- Directly input the transmit frequency, then press the OK key to confirm. The device will return to the previous menu.
- Press the Up/Down keys to access the sub-audio settings menu and configure the sub-audio frequency.
5.4 Customizing Keys
You can customize the functions of the side keys and keyboard for quick access to frequently used features.

The 'Key Define' menu allows customization of side keys and keyboard functions for shortcuts.
- Side Key 1/2: Can be assigned to PTT-2/PTT-3 for transmission, disabling other custom functions.
- OK Key: Short press to confirm/enter menu. Long press to enter DTMF inputting or exit menu.
- Up/Down Keys: Switch upwards/downwards, also used for DTMF B/C.
- Numeric Keys (0-9): Short press to enter numbers. Long press for definable functions.
- * Key: Long press to lock the keypad. Short press for text input delete.
- # Key: Short press to switch working mode (VFO/channel/zone mode). Long press to jump to transmit frequency input menu.
6. Operating Instructions
6.1 Transmitting and Receiving
- Transmitting: Press the PTT key to initiate a call on the current frequency. The LED indicator will turn red during transmission.
- Receiving: When a signal on the same frequency is received, the LED indicator turns green. If no sub-audio is set, or if the set sub-audio matches the received signal, the device will enable audio output.
6.2 GPS and APRS Location Sharing
After configuring GPS and APRS (as per Section 5.1), you can share your location:
- Press the PTT button. Your location information will be shared.
- When the GPS icon on the display changes from gray to green, it indicates successful positioning.

Two Irradio UV-98 PLUS walkie-talkies demonstrating the APRS+GPS function, showing real-time transmission and reception of positioning data.
6.3 Cross-Band Repeater Mode
This mode allows your radio to relay signals across different frequency bands, extending communication range.

Diagram showing how the cross-band repeater mode works, enabling 'U trans U' (same-frequency inter-transfer) and 'U trans V' (UV cross-band) relay capabilities.
- A button can be defined as the [Relay Switch].
- When enabled in [Radio Settings] -> [Repeater Mode], the device enters cross-band relay mode.
- In this mode, Channel C is disabled, and only Channels A and B are used for cross-band relay. Signals received on Channel A will be retransmitted on Channel B, and vice-versa.
- The [Repeater Monitor] setting allows listening to relayed voice communications.
6.4 Spectrum Scanning
The spectrum scanning function allows you to analyze surrounding radio frequency signals.
- Set a shortcut key to select the spectrum scanning function (e.g., '0 Press Long' to 'Radio S' or 'Spectrum').
- After pressing the trigger button, enter the spectrum scanning mode.
- Press the * key to exit.
- A short press of the * key switches the input items.
6.5 DTMF Functions
- DTMF Encoding Input & Transmission: In standby mode, long press the OK key to enter the DTMF input interface. Use the numeric keypad to enter DTMF codes. Short press Side Key 2 to delete the last DTMF digit. Press the PTT key to initiate a call; the device will send the DTMF code after a preset delay.
- DTMF Decoding: When the device receives a signal and DTMF decoding is enabled, the screen will display the received DTMF code.
- DTMF Transmission in Analog Mode: During analog transmission, pressing a key on the keypad will send the corresponding DTMF code.
- DTMF Remote Monitoring: Set a DTMF monitoring code and enable [Accept Remote Control]. Another radio can send the same DTMF code to this device. Upon successful decoding, the device will automatically transmit for 60 seconds, enabling remote monitoring.
- DTMF Remote Stun/Kill/Wake: Set a DTMF remote stun/kill/wake code and enable [Accept Remote Control]. Another radio can send the corresponding DTMF code to stun, kill, or wake this device.
6.6 Other Functions
- Monitor: Opens the receiver audio.
- Power Switch: Toggles high/low power.
- Scan: Initiates scanning (any key to exit).
- VOX (Voice-Activated Transmission): Enables/disables.
- Squelch Level: Adjust squelch settings.
- Frequency Step: Set frequency step size.
- Dual Watch: Enable/disable dual frequency monitoring.
- Priority Transmission: Set to "Edit" or "Busy" mode.
- TX End Tone: Change transmission end tone type.
- Radio Mode: Pressing the trigger button enters radio mode. The PTT key exits radio mode.
- One-click Frequency Measurement and Remote Decryption of Privacy code: After pressing the trigger button, the device will enter the frequency measurement or remote privacy code decryption mode. It will scan surrounding radio frequency signals. The * key switches between frequency measurement and remote sub-audio decryption.
7. Maintenance
7.1 Charging
The Irradio UV-98 PLUS supports multiple charging methods:

Various charging methods: using the base charger, direct Type-C charging, and compatibility with wall adapters, laptops, power banks, and car chargers.
- Base Charger: Place the walkie-talkie in the provided base charger.
- Type-C Charger: Connect a Type-C cable directly to the walkie-talkie.
- The device can be charged via a wall adapter, laptop, power bank, or car charger using the Type-C port.
7.2 General Care
- Keep the device clean and dry. Avoid exposure to extreme temperatures or humidity.
- If the equipment emits an abnormal odor, turn it off immediately and seek professional inspection.
8. Troubleshooting
- No Transmission/Reception: Ensure the correct antenna for the selected frequency band is attached. Mismatched antennas can cause damage.
- Intermittent Calls: If receiving signals from devices with a large frequency offset, increase the neighboring channel suppression threshold in Analog Call Settings.
- DTMF Decoding Difficulties: Adjust the [DTMF Transmit Gain] and [DTMF Decode Threshold] values to maximize compatibility with other walkie-talkies. Recommended values are 64 for transmit gain and 24 for decode threshold.
- Sharp Sound in SSB Mode: When using Single Sideband (USB or LSB) demodulation and encountering sharp sound, lower the BFO (Beat Frequency Oscillator) frequency. If the sound is too deep, increase the BFO frequency.
- Device Stunned/Killed: If the device is stunned or killed remotely, ensure a wake code is set to restore functionality. Without a wake code, the device cannot be restored.
- GPS Icon Gray: If the GPS icon remains gray, ensure GPS is turned on in the "Extend (Optional)" menu and the device has a clear view of the sky for satellite acquisition.
9. Specifications
9.1 General Parameters
| Parameter | Value |
|---|---|
| Product Model | UV-98 PLUS |
| Brand Name | Iradio |
| Walkie Talkie Type | Portable |
| Material | Plastic |
| Is Display | Yes (2.4" large screen) |
| Battery Included | Yes |
| Battery Capacity | 2400 mAh |
| Charging Method | Type-C / Dock Charging |
| Waterproof / Water-Resistant | No |
| FCC ID | Y23UV-98PLUS |
| Origin | Mainland China |
9.2 Frequency and Channel Specifications
| Parameter | Value |
|---|---|
| Frequency Range (RX) | CB: 27MHz, FM: 64-108MHz, SW: 2.3-30MHz, MW: 520-1710KHz, LW: 153-279KHz, 18-620MHz (AM/FM/SSB), 840-999MHz |
| Frequency Range (TX) | CB: 27MHz, 18-64MHz, 136-520MHz |
| Storage Channels | 1024 + 3 VFO |
| Channel Spacing | Analog: 25KHz/12.5KHz, Digital: 12.5KHz |
| Frequency Stability | ±2.5ppm |
| Working Mode | Same frequency simplex, different frequency simplex |
9.3 Transmitting Part
| Parameter | Value |
|---|---|
| Output Power (w) | 5w-10w |
| Modulation Mode | F3E |
| Max Frequency Deviation (W/N) | <5KHz/≤2.5KHz |
| SNR (W/N) | -45dB/-40dB |
| TX Current | <2500mA |
9.4 Receiving Part
| Parameter | Value |
|---|---|
| Sensitivity (W/N) | 0.22μV/0.25μV (12dB SINAD) |
| Inter Modulation (W/N) | 65dB/60dB |
| Audio Distortion | <5% |
| Audio Output Power | <1W (16Ω) |
| RX Current | ≤350mA |
| Standby Current | ≤100mA |
9.5 Physical Characteristics

Side and front views of the walkie-talkie with dimensions: 320mm (total height with antenna), 149mm (body height), 64mm (width), and 37mm (depth).
- Dimension: 149*64*37mm (Antenna is not included)
- Weight: 307g
- Working Temperature: -20°C to +60°C
10. User Tips
- Antenna Compatibility: You can switch the frequency range according to your usage needs. The working range of the frequency band is: 18-64MHz, 64-642MHz, 840-1000MHz. These three ranges cannot work simultaneously, and an antenna compatible with the selected frequency range needs to be replaced before use. For example, a CB antenna (27MHz antenna) is required for 27MHz, or an antenna compatible with 50MHz for 50MHz.
- Programming Software: This walkie-talkie requires a dedicated Type-C interface Programming Cable provided by the manufacturer to connect to a computer. Channel programming is performed using the UV-98 PLUS frequency writing software. A regular mobile phone data cable or generic write frequency cable cannot establish a communication connection.
- Software Availability: If you cannot find the frequency writing software, please contact the seller or manufacturer for assistance.
- Ease of Use: Many users find the programming software straightforward and easy to use.
11. Warranty & Support
11.1 Missing or Damaged Items
If any accessories are missing or damaged upon unboxing, please contact your local distributor immediately for assistance.
11.2 Additional Resources
For more detailed instructions and information, you can refer to the full user manual in PDF format: