1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your new Automobile Iron Oil Filter Grid Module. Designed for Geely Emgrand GS GL 1.4T and 1.3T models, this oil filter is a critical component for maintaining engine health by ensuring clean engine oil circulation. Please read these instructions carefully before proceeding with installation or maintenance.
2. Package Contents
Upon opening the package, please verify that all components are present and undamaged.
- 1 x Automobile Iron Oil Filter Grid Module (Part Number: 1016056847-1017025-1)

3. Specifications
| Feature | Detail |
|---|---|
| Part Numbers | 1016056847, 10160-56847 |
| Compatibility | Geely Emgrand GS GL 1.4T, 1.3T |
| Material | Iron (implied by product name) |
| Package Length | 10 cm |
| Package Width | 10 cm |
| Package Height | 8 cm |
| Package Weight | 0.35 kg |
| High-concerned chemical | None |
| Origin | Mainland China |
4. Vehicle Compatibility
This oil filter is specifically designed for Geely Emgrand GS GL models with 1.4T and 1.3T engines. To ensure correct fitment for your vehicle, it is highly recommended to verify compatibility using your vehicle's VIN (Vehicle Identification Number) or chassis number. This number can typically be found on your driver's license or vehicle registration documents.
Important Note: Please confirm the correct model for your vehicle using your VIN/chassis number. Incorrect fitment may lead to engine damage.
5. Installation Instructions
Replacing an oil filter requires basic automotive knowledge and tools. If you are unsure about any step, please consult a qualified mechanic.
5.1 Safety Precautions
- Always work on a cool engine to avoid burns.
- Use appropriate safety gear, including gloves and eye protection.
- Ensure the vehicle is securely supported on jack stands if lifting is required.
- Dispose of used oil and filters responsibly according to local regulations.
5.2 Tools Required
- Wrench or socket for drain plug
- Oil filter wrench
- Drain pan
- New engine oil (refer to your vehicle's owner manual for type and quantity)
- Funnel
- Clean rags
5.3 Step-by-Step Installation
- Prepare the Vehicle: Park the vehicle on a level surface and engage the parking brake. If necessary, lift the front of the vehicle using a jack and secure it with jack stands.
- Locate Drain Plug and Oil Filter: Refer to your vehicle's service manual to locate the engine oil drain plug and the oil filter.
- Drain Old Oil: Place the drain pan beneath the oil drain plug. Using the appropriate wrench, carefully loosen and remove the drain plug. Allow all the old engine oil to drain completely. Once drained, clean the drain plug and reinstall it, tightening to the manufacturer's specifications.
- Remove Old Oil Filter: Position the drain pan under the oil filter. Use an oil filter wrench to loosen the old oil filter. Once loose, unscrew it by hand. Be prepared for some oil to spill out.
- Prepare New Oil Filter: Take your new oil filter. Apply a thin film of new engine oil to the rubber gasket of the new filter. This helps ensure a good seal.
- Install New Oil Filter: Carefully screw the new oil filter onto the engine by hand until the gasket makes contact with the engine block. Then, tighten it an additional 3/4 to 1 full turn, or according to the manufacturer's specifications. Do not overtighten.
- Add New Engine Oil: Remove the engine oil filler cap. Using a funnel, slowly pour the recommended amount and type of new engine oil into the engine.
- Check Oil Level: After adding oil, wait a few minutes for the oil to settle. Check the oil level using the dipstick. Add more oil if necessary until the level is within the 'full' range.
- Start Engine and Check for Leaks: Start the engine and let it run for a few minutes. Check for any oil leaks around the drain plug and the new oil filter. Turn off the engine and recheck the oil level after a few minutes. Top up if needed.
- Lower Vehicle: If the vehicle was lifted, carefully lower it.



6. Operation
The oil filter operates passively as part of your engine's lubrication system. Its primary function is to remove contaminants from the engine oil, such as dirt, metal particles, and sludge, preventing them from circulating and causing wear to engine components. A properly functioning oil filter ensures that only clean oil reaches critical engine parts, thereby extending engine life and maintaining optimal performance.
7. Maintenance
Regular replacement of the oil filter is crucial for engine longevity. Refer to your vehicle's owner's manual for the recommended oil change intervals, which typically include replacing the oil filter at the same time. Factors such as driving conditions (e.g., frequent short trips, heavy towing, dusty environments) may necessitate more frequent oil and filter changes.
- Check Oil Level Regularly: Even with a new filter, it's good practice to check your engine oil level periodically (e.g., weekly or bi-weekly) and top up if necessary.
- Monitor for Leaks: After an oil change, regularly inspect the area around the oil filter and drain plug for any signs of oil leaks.
8. Troubleshooting
Most issues related to an oil filter are preventable with proper installation and regular maintenance. However, if you encounter problems, consider the following:
8.1 Common Issues and Solutions
- Oil Leaks After Installation:
- Cause: Improperly tightened filter, damaged gasket, or old gasket residue.
- Solution: Ensure the old gasket is completely removed. Apply a thin film of new oil to the new filter's gasket. Tighten the filter correctly (hand-tight plus 3/4 to 1 turn). If the leak persists, the filter or gasket might be faulty and require replacement.
- Low Oil Pressure Warning Light:
- Cause: Severely clogged filter (unlikely with a new filter), incorrect oil level, or other engine issues.
- Solution: Immediately check the engine oil level and add oil if low. If the light persists, stop the engine and consult a mechanic. A new filter should not cause this unless it's defective or severely restricted.
- Difficulty Removing Old Filter:
- Cause: Overtightened during previous installation or seized due to heat cycles.
- Solution: Use a high-quality oil filter wrench. If extremely stubborn, professional assistance may be required to avoid damaging the engine block.
9. User Tips
- Always use the correct type and viscosity of engine oil as specified by your vehicle manufacturer.
- Consider pre-filling the new oil filter with fresh oil before installation to reduce the time the engine runs without full oil pressure.
- Keep a record of your oil and filter changes to ensure timely maintenance.
10. Warranty and Support
For any questions regarding the product, installation, or potential defects, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.