1. Introduction
Thank you for choosing the JASIC NBM-270 4-in-1 MIG Inverter Welder. This versatile machine is designed for professional and hobbyist use, offering multiple welding processes including MIG, MAG, TIG, and MMA. Its advanced features ensure precise control and high-quality welds across various materials. Please read this manual thoroughly before operation to ensure safe and efficient use of the equipment.

2. Product Features
The JASIC NBM-270 welder is equipped with a range of features designed for optimal performance and user convenience:
- Multi-Process Welding: Supports pulse gas shielded welding, DC gas shielded welding, gas-free self-protection welding, manual welding (MMA), and professional arc argon welding (TIG).
- Integrated Design: Features a compact design with standard 2.5-inch wheels for easy mobility around the workshop.
- Advanced Protection: Incorporates multiple protection functions including overheating, overcurrent, driving undervoltage, and abnormal wire feeding to ensure safety and prolong machine life.
- ARM Chip Control: Utilizes ARM chip control and a digital voltage loop algorithm for fast and accurate control of the output waveform.
- Simplified Operation: Internal integration unifies controls, making welding parameter adjustment straightforward.
- Plate Thickness Selection: Includes a function for plate thickness selection, automatically matching welding parameters for various material thicknesses.
- Digital Wire Feeder: Digital wire feeder drive control ensures continuous and stable wire feeding, with optimized control for the welding arc initiation process.
- Intelligent Fan: An intelligent, energy-saving fan reduces noise and dust entry, extending the fan's lifespan.

3. Technical Specifications
Below are the detailed technical specifications for the JASIC NBM-270 (N249) welder:
| Category | Parameter | Value |
|---|---|---|
| Model | Model Name | NBM-270 (N249) |
| Rated Input Voltage | Three-phase AC380V ± 15% | |
| Rated Input Capacity | 16.18 KVA | |
| Power Factor | 0.6 | |
| Output | Rated No-load Voltage | 70 V |
| Gas Shielded Welding Current | 40-270 A | |
| Gas Free Self-Protection Welding Voltage | 16-27.5 V | |
| Pulse Gas Shielded Welding Current | 15-270 A | |
| Rubbing Arc Argon Welding Current | 15-270 A | |
| Manual Welding Current | 15-270 A | |
| Gas Meter Heater Voltage | 36 V (AC) | |
| General | Rated Duty Cycle @ 40°C (MIG) | 35% |
| Efficiency | 82% | |
| Protection Grade | IP21S | |
| Insulation Level | F | |
| Dimensions (L*W*H) | 640*320*700 mm | |
| Weight | 38.8 kg | |
| Materials & Wire | Material / Metal Processed | Carbon Steel, Iron, Stainless Steel, Aluminium Alloy |
| Wire Melting Type | Other | |
| MIG Solid Wire Diameter | 0.8mm, 0.9mm, 1.0mm |

4. Initial Setup
Before operating the welder, ensure it is properly set up according to these instructions:
- Unpacking and Placement: Carefully remove the welder from its packaging. Place the unit on a stable, level surface. The NBM-270 is equipped with wheels for easy movement. Ensure adequate ventilation around the machine.
- Power Connection: Connect the welder to a three-phase AC380V ± 15% power supply. Ensure the power source matches the welder's requirements and is properly grounded.
- Gas Cylinder Connection (for Gas Shielded Welding): For MIG/MAG/TIG welding, connect the appropriate shielding gas cylinder (e.g., Argon, CO2, or mixed gas) to the gas inlet on the rear of the machine. Secure the gas hose with clamps and check for leaks.
- Welding Torch Connection: Connect the welding torch (MIG gun, TIG torch, or MMA electrode holder) to the corresponding interface on the front panel. Ensure a secure connection.
- Work Clamp Connection: Attach the work clamp (ground clamp) to the workpiece or a conductive work table, ensuring good electrical contact.
- Wire Spool Installation (for MIG/MAG): Open the wire feeder compartment and install the appropriate welding wire spool (0.8mm, 0.9mm, or 1.0mm). Thread the wire through the feeder mechanism and into the MIG gun liner.

5. Operating Instructions
The NBM-270 offers multiple welding modes. Follow these general steps for operation:
- Power On: Turn on the main power switch. The digital display on the front panel will illuminate.
- Select Welding Mode: Use the control panel to select the desired welding process (MIG, MAG, TIG, MMA, Pulse MIG, Gas-Free MIG).
- Adjust Parameters: Based on the material type, thickness, and welding wire diameter, adjust the welding current (Amperage), voltage, and wire feed speed using the control knobs. The plate thickness selection function can assist in setting initial parameters.
- Pre-Flow Gas (for Gas Shielded Welding): If using gas-shielded welding, ensure the gas flow rate is set correctly on the gas regulator.
- Perform Test Weld: Always perform a test weld on a scrap piece of material to verify settings before welding the actual workpiece.
- Welding: Initiate the arc and proceed with welding, maintaining proper technique and safety precautions.
- Post-Weld: After welding, turn off the machine and gas supply (if applicable). Allow the machine to cool down.
5.1. Specific Welding Modes
- MIG/MAG (Gas Shielded Welding): Ideal for steel and stainless steel. Requires shielding gas. Adjust wire feed speed and voltage.
- Pulse Gas Shielded Welding: Provides enhanced control for various materials, especially aluminum. Allows for lower heat input and better bead control.
- Gas-Free Self-Protection Welding: Uses flux-cored wire, eliminating the need for external shielding gas. Suitable for outdoor use or where gas cylinders are impractical.
- TIG (Arc Argon Welding): For precise welding of thin materials and exotic metals. Requires an Argon gas supply and a TIG torch.
- MMA (Manual Welding): Uses coated electrodes. Suitable for various materials and conditions.


6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welder:
- Cleaning: Regularly clean the exterior of the machine with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings, especially the intelligent fan, to prevent overheating.
- Check Connections: Periodically inspect all electrical connections, including power cables, welding cables, and gas hoses, for wear, damage, or looseness. Tighten any loose connections.
- Wire Feeder Maintenance: Clean the wire feeder rollers and guide tubes to ensure smooth wire feeding. Replace worn contact tips and liners in the MIG gun as needed.
- Torch Inspection: Inspect the welding torch for any damage to cables, nozzles, or electrodes. Replace consumables regularly.
- Storage: When not in use, store the welder in a clean, dry environment, protected from dust and moisture.
7. Troubleshooting
This section provides solutions to common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Welder does not power on | No power supply; Main switch off; Faulty power cable | Check power connection and circuit breaker; Turn on main switch; Inspect/replace power cable |
| No welding output | Work clamp not connected; Incorrect welding mode selected; Overheating protection activated | Ensure work clamp has good contact; Select correct mode; Allow machine to cool down |
| Poor wire feeding (MIG/MAG) | Wire spool tangled; Worn wire liner/contact tip; Incorrect roller tension | Untangle wire; Replace worn parts; Adjust roller tension |
| No gas flow (Gas Shielded Welding) | Gas cylinder empty; Regulator closed; Gas hose leak | Check/replace gas cylinder; Open regulator; Check for leaks |
| Overheating indicator on | Exceeded duty cycle; Blocked ventilation | Allow machine to cool; Clear ventilation openings |
8. User Tips
- Always wear appropriate Personal Protective Equipment (PPE), including welding helmet, gloves, and protective clothing.
- Keep your work area clean and free of flammable materials.
- For optimal aluminum welding, ensure the workpiece is thoroughly cleaned and use the pulse MIG function with appropriate shielding gas (e.g., 100% Argon).
- Regularly check the condition of your welding cables and connections to prevent arc instability and ensure safety.
9. Warranty and Support
The JASIC NBM-270 welder comes with a 3-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal operating conditions. For warranty claims, technical support, or service inquiries, please contact your authorized dealer or the manufacturer's customer service department. Please have your purchase receipt and product serial number available when contacting support.