MEKEDE Android Auto Car Radio Screen for BMW E90 E91 E92 E93

Contents

MEKEDE Android Car Radio Screen User Manual

For BMW 3 Series E90, E91, E92, E93 (2005-2013)

1. Introduction

This manual provides comprehensive instructions for the MEKEDE Android Car Radio Screen, an intelligent car audio-visual navigation system designed for BMW 3 Series E90, E91, E92, E93 models from 2005 to 2013. This upgraded Android system integrates GPS navigation, WiFi internet access, car theater, and various entertainment features to enhance your driving experience.

The system utilizes advanced intelligent voice navigation technology for detailed navigation information and offers a rich entertainment system. It is built with cutting-edge technology to provide a powerful and highly open intelligent vehicle information system.

MEKEDE Android Car Radio Screen installed in a BMW E90 dashboard, showing a CarPlay interface.

Figure 1: MEKEDE Android Car Radio Screen installed in a BMW E90 dashboard.

Comparison of BMW E90 dashboard before and after installation of the MEKEDE Android Car Radio Screen.

Figure 2: Before and after installation comparison.

2. Safety Warnings and Precautions

To ensure your personal safety, the safety of your car, and others, please adhere to the following basic requirements:

  1. Read Instructions Carefully: Please read all relevant instructions carefully before using this device. Any damage to the unit caused by failure to follow these instructions will void the warranty.
  2. Driving Safety: To ensure driving safety and avoid violating traffic rules, do not watch programs or operate the machine while driving.
  3. Avoid Short Circuit: To prevent short circuits, do not expose this unit to rain.
  4. No Metal Objects: Do not place or leave any metal objects (such as coins or metal tools) inside the device.
  5. Professional Maintenance: Use the machine according to this manual. Do not open the machine for maintenance yourself. If maintenance is required, please go to a professional maintenance station.
  6. Battery Drain: When the engine is off, do not use the car audio for a long time, as it will drain the car battery.
  7. Prevent Obstruction: Do not insert objects into ventilation slots or other openings of the device.
  8. Screen Care: Do not touch, rub, or knock the screen with sharp objects.

2.1. Cleaning Equipment

  • General Cleaning: If the device panel is stained, use a clean, soft cloth (e.g., a cleaning cloth) to wipe off the stains.
  • Stubborn Stains: For very dirty panels, wipe off the dirt with a neutral detergent, then wipe off the detergent with a clean, soft cloth.
  • Caution: Using cleaning sprays directly on the device may affect mechanical parts. Avoid using hard cloths or volatile liquids (such as thinner or alcohol) to wipe the panel, as this may scratch the surface or erase characters.

3. Specifications

The MEKEDE Android Car Radio Screen comes in different models (X1, X2) with varying specifications. Please refer to the table below for details.

Table showing car multimedia player parameters for models X1 and X2, including RAM/ROM, OS, Core, Car-play+Auto, Resolution, Screen, Internet, Camera/DVR, BT module, and Radio.

Figure 3: Car Multimedia Player Parameter Comparison (X1 vs X2)

General Product Specifications
AttributeValue
Brand NameMEKEDE
Operating SystemAndroid
Display Size9"
Resolution1024*600 / 1280*720
RAM1/2G
ROM16/32G
Out Power4*45w
Voltage12 V
Item Weight1.8 kg
Item Size9 inch
Material TypePlastic and metal
InterfacePlug and play
Special FeaturesWifi function, Support steering wheel control, Support Can-Bus, Built-in GPS, MP3 players, CarPlay, Android Auto, Reversing Input
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageMulti-language support including English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Arabic, etc.
CertificationCE, FCC
Screen TypeIPS Screen
InternetWIFI
Bluetooth (BT)Support
RadioFM RDS
AHD/DVRSupport (Optional)
CarPlaySupport
Android AutoSupport

Applicable Models & Years: For BMW 3 Series E90, E91, E92, E93 (2005-2013). Note: Years are for reference only; please confirm the center console of your vehicle before installation.

Image showing applicable BMW 3 Series models E90, E91, E92, E93 and years 2005-2013.

Figure 4: Applicable BMW Models and Years.

4. Package Contents

The product package typically includes the following items:

  • Main Unit (Car Radio Screen)
  • Power Cable + Canbus Box
  • RCA Cable
  • USB Cable
  • Reversing Camera Cable
  • GPS Antenna
Diagram showing the package contents: main unit, power cable with Canbus box, RCA cable, USB cable, reversing camera cable, and GPS antenna.

Figure 5: Package Contents.

5. Setup and Installation

5.1. Initial Power On

When you plug in the car key and turn on the ACC power supply, the device will automatically turn on and display the start-up LOGO animation. When you take off the car key and turn off the ACC power supply, the device will automatically shut down.

5.2. Connecting the Rear View Camera

Follow these steps to connect your rear view camera:

  1. Red cable (2) is connected to the back light "+".
  2. Black cable (1) is connected to the "GND".
  3. The reverse detection cable (4) (Brown color) is connected to the red cable (3) which is extending from the video output cable. Please follow the picture below to connect.
Wiring diagram for connecting a rear view camera to the car radio screen. Shows connections for red cable to backlight, black cable to GND, and reverse detection cable.

Figure 6: Rear View Camera Wiring Diagram.

5.3. Back of the Host Device Connections

Refer to the diagram below for the various audio, video, and power connections on the back of the host device. If your car has a Canbus system, ensure you use the provided Canbus box and cable. For cars with an amplifier sound system, you may need an "Optical Fiber box" for sound output.

Detailed wiring diagram for the back of the car radio screen, showing audio, video, power, USB, and camera inputs. Includes a note about using a USB cable if the car has Canbus.

Figure 7: Back of the Host Device Wiring.

Image showing a blue car connector and an 'Optical Fiber box' with a note: 'If your original car connector is like this, that your car has amplifier sound system, need buy a 'Optical Fiber box' together, then your car can sound output.'

Figure 8: Optical Fiber Box for Amplifier Sound Systems.

5.4. Steering Wheel Control Setup

Steering wheel controls can be configured in two ways, depending on whether your unit includes a Canbus box.

5.4.1. With Canbus Box

  1. Before starting the setup, please confirm the Canbus box and 8-pin serial cable are connected to the multimedia unit.
  2. Then, refer to the picture below to set your car model within the system settings.
Diagram showing the connection of the Canbus box and 8-pin serial cable to the multimedia unit, followed by screenshots of the system settings interface to select the car model (BMW).

Figure 9: Steering Wheel Control Setup with Canbus Box.

5.4.2. Without Canbus Box (Key Learning)

If your unit does not have a Canbus box, you will need to use the key learning function:

  1. Connect the positive and negative poles of the steering wheel control line of the original car with the positive and negative poles of the square control line of the machine.
  2. In the "Application Interface", tap the Key Learning icon to enter the Key Learning interface.
  3. Tap [Start Learning] to enter the learning mode.
  4. Select the touch button you need to learn on the interface.
  5. After pressing the corresponding physical button on your steering wheel, tap the [Save] button on the screen. The learned state will be displayed.
  6. Repeat these steps until all desired keys are learned.
Screenshots showing the Key Learning interface for setting steering wheel controls without a Canbus box. It illustrates selecting a function and then pressing a physical button.

Figure 10: Steering Wheel Control Setup without Canbus Box (Key Learning).

6. Operating Instructions

6.1. Panel Buttons Overview

The physical buttons on the device panel provide quick access to essential functions. Refer to the diagram below and the descriptions for each button.

Button/IconFunctionDescription
POWERPower On/OffShort press to turn on (if off). Long press to turn off the screen (if on).
VOLUME (+/-)Volume ControlAdjusts the system volume up or down.
HOMEReturn to Main InterfaceFrom any application, press to return to the main interface.
RETURNBack / Close DialogReturns to the previous interface or closes an active dialog.
MIC HOLEMicrophone InputBuilt-in microphone for voice commands and calls.
RST HOLEReset ButtonUsed to reset the device (requires a thin object to press).

6.2. Main Interface Navigation

To access the main interface, click the physical HOME button on the host panel or press the Home icon on the screen. You can swipe left and right on the screen to navigate through different pages of applications.

Screenshots of various main menu interfaces, showing different layouts and icons for music, navigation, radio, and other apps.

Figure 11: Examples of Main Menu Interfaces.

In any mode, pull down from the top of the screen to display the drop-down Settings bar. This bar provides quick access to shortcut switches, screenshots, Wi-Fi, and auto-brightness. You can also adjust brightness and volume from here.

6.3. Application Management

Tap the Apps icon to open the Application interface, which lists all built-in and third-party applications. To manage running applications, tap the Task Manager icon. From here, you can swipe left/right on an app to close it, or tap the Close button to terminate the program.

6.3.1. Third-Party Application Installation

  1. Download the third-party application (APK file) to your computer.
  2. Copy the APK file to a memory card or USB flash drive.
  3. Insert the memory card or USB disk into the device.
  4. In the Application interface, tap the File Manager icon.
  5. Navigate to the location of the downloaded APK file and tap it to install.

6.4. Music Player

The music player supports audio files from USB, SD card, and built-in storage (MP3, WMA, WAV, M4A, MID, etc.). If an unsupported format is played, a message will indicate it cannot be played.

To start the music player, tap the music plug-in on the main interface or double-click an audio file in the File Browse interface.

  • Controls: Previous, Play/Pause, Next.
  • Playback Mode: Cycle (Random/Single/List).
  • Sound Effect: Access sound equalizer settings.
  • Progress Bar: Displays current playback progress.

6.5. Bluetooth Functions

Tap the Bluetooth Phone icon to access Bluetooth features.

6.5.1. Pairing a Bluetooth Device

  1. Turn on Bluetooth on your mobile phone.
  2. On the device, open the [Bluetooth pairing] interface and turn on the pairing switch (OFF/ON) to enable discovery.
  3. Search for the vehicle (within 10m) using your phone's Bluetooth settings.
  4. Select the device (e.g., "CarBt-XXXX") on your phone. A [Bluetooth Pairing Request] pop-up box will appear on your phone.
  5. Tap [Pairing] or enter the PIN code (default is "0000" or "1234") to connect.

6.5.2. Bluetooth Contacts

After successful phone connection, tap [Contacts] on the left to open the interface. Tap the synchronize button to import your phonebook. You can view contacts and numbers, and tap a contact to initiate a quick call. The clear button can be used to delete phonebook information.

6.5.3. Making/Receiving Calls

  • Dialing: Tap [Dial] to open the dial interface. Enter the number using the keypad and tap the Call icon.
  • Call History: Tap [Call History] to view missed, received, and dialed calls. Long-press a contact to quickly call.
  • In-Call Options: During a call, you can:
    • Hang Up: End the call.
    • Transfer: Switch the call between handset and car audio.
    • Mute: Toggle silent mode.
    • Keyboard: Pop up the numeric keypad.

6.5.4. Bluetooth Music

Tap the Bluetooth Music icon in the Application interface. This function allows wireless playback of music files from your phone, provided your phone supports the corresponding Bluetooth protocol. When connected, the sound system automatically connects to the paired phone. In some cases, music playback may need to be initiated from the phone's keyboard.

6.6. Navigation System

Tap the Navigation icon (or Google Maps icon) to enter the navigation program. The default navigation is Google Maps.

Image showing various GPS navigation app icons like iGO, Sygic, Yandex, Google, Waze, and AMAP, with a satellite in the background.

Figure 12: GPS Navigation Interface.

6.6.1. Navigation Guidelines

  1. Ensure the host is correctly connected to the satellite dish. The satellite dish needs to receive signals during startup and update internal information.
  2. Ensure the vehicle is not in an area with poor satellite reception (e.g., tunnels, tall buildings).
  3. Set the navigation destination while parked; do not operate navigation while driving.

6.6.2. Navigation Functionality

You can find your destination using various retrieval functions of the navigation software. After setting the destination, the system will plan the path and navigate. For familiar areas, you may choose to drive on your own, but the system's routes are optimized for driving conditions.

6.6.3. Navigation Map Updates

Due to rapid urban development and road traffic changes, navigation map companies continuously update their maps. Please ensure you timely unpack and update the navigation map information.

6.7. Radio Station

Tap the Radio icon in the application interface to enter the Radio Setting interface.

Screenshot of the FM Radio interface, showing frequency display, station presets, and search/scan controls.

Figure 13: FM Radio Interface.

  • Functions: Search for stations, save stations.
  • Playback: When switched to radio playback, the system will automatically play the last station. After an automatic station search, the program will update and save the station list.
  • Presets: There are 12 pre-stored stations in the favorites list. Swipe left/right to view all channels. Long-press a current channel to bookmark and save it.

6.8. Video Player

Tap the Video icon in the Application interface to enter the Video File List. Swipe left/right to view the list. Video files display cover pictures, names, and playing durations.

Screenshot of the 1080P video playback interface, showing a video of camels in a desert.

Figure 14: 1080P Video Playback.

Tap a video file to enter the Video Play screen. The device supports 1080P video decoding, True Color 24 HD-Display, and fluent playback of APE music 3D acceleration at any section of USB/SD quality video.

6.9. Advanced Driver-Assistance Systems (ADAS) & Reversing Video

6.9.1. ADAS DVR

The ADAS DVR (Anti-collision warning driving recorder) provides features like front vehicle distance prediction, front vehicle anti-collision warning, and lane departure warning to enhance driving safety.

Diagram illustrating ADAS DVR features: Lane departure warning (LDW), Forward collision warning (FCW), and Front vehicle distance warning (HMW).

Figure 15: ADAS DVR Features.

6.9.2. Reversing Video System

The reversing video system automatically switches to display the rear image of the vehicle when reversing, filling blind spots. It includes a third-speed distance reference line for judgment and displays astern radar on the left side, informing the driver of surrounding obstacles. The picture quality of the rear-view video is clearer than that of ordinary cameras.

Screenshot of the Reversing Video interface showing a car backing into a parking spot with parking lines and sensor indicators.

Figure 16: Reversing Video Display.

6.10. System Settings

Tap the Settings icon to open the System Settings screen. You can drag the left side up and down to view all settings categories.

  • WLAN: Configure wireless network settings. Turn on the Wi-Fi switch, and the device will automatically search for nearby networks.
  • Navigation: Set default navigator (e.g., Google Maps) and adjust navigation mix volume.
  • Display: Adjust brightness, auto-brightness, front/rear visual brightness, and key light.
  • Reverse Camera: Configure reverse camera settings, including camera format, guide lines, radar display, mirror function, and quick exit astern.
  • Radio: Set radio signal strength (High, Middle, Low) and radio antenna power supply. Select radio area (e.g., Asia 87.5-108.50 KHz).
  • Date and Time: Set date, time, time zone, 24-hour format, automatic date & time, and auto time-zone.
  • System:
    • Start-up prompt announcement
    • Power on multimedia memory
    • Volume modulation of music
    • Factory Settings (password "8888")
    • Restore Factory Settings (password "8888") - Caution: This will delete third-party software and reset system settings.
  • About: View product information, product name, model, product info, Android version, software version, and service version.

6.11. Theme and Customization

Tap the Theme icon in the Application interface to customize the device's appearance.

Screenshots of various theme interfaces, showing different visual styles for the car radio screen.

Figure 17: Theme Interface Examples.

  • Themes: Choose from multiple built-in themes or upgrade theme packs online.
  • Screensavers: Select different screen saver styles.
  • Wallpapers: Set background pictures from pre-installed options or customize by selecting images from your album.
  • Update: Access the upgrade theme package interface to update single themes or download all available updates.

7. User Tips

  • Steering Wheel Controls & Parking Sensors: Many users report that steering wheel controls and parking sensors integrate seamlessly and often work even better than the standard system, especially for parking assist. Ensure your CANBUS box is correctly installed for these features.
  • Sound Issues: If you experience no sound after installation, double-check all wiring connections, especially for the CANBUS box. Some BMW E91 models might require specific attention to audio wiring or an optical fiber box if an amplifier sound system is present.
  • CANBUS for Controls: The CANBUS module is crucial for enabling steering wheel controls and other integrated car functions. If your unit did not include one and you need these features, contact support for a compatible CANBUS solution.
  • CarPlay/Android Auto: Wireless CarPlay and Android Auto functions are highly praised for their ease of use and performance. Ensure Bluetooth is connected for wireless functionality, or use a USB cable for wired connection.

8. Troubleshooting

  • No Power: Check power connections (ACC, Battery+12V, GND). Ensure the car key is in the ACC position.
  • No Sound:
    • Verify all audio output cables (RCA) are correctly connected to your car's amplifier or speakers.
    • If your car has an amplifier sound system, ensure an "Optical Fiber box" is installed and correctly connected.
    • Check the volume settings on the device and your car's original audio system.
    • If using Bluetooth, ensure the phone is paired and connected, and music is playing from the correct source.
  • Steering Wheel Controls Not Working:
    • Confirm the Canbus box is correctly installed and connected (if applicable).
    • If no Canbus box, ensure the key learning process (Section 5.4.2) has been completed successfully.
    • Check the wiring of the steering wheel control lines.
  • GPS Signal Issues:
    • Ensure the GPS antenna is properly installed and has a clear view of the sky.
    • Avoid areas with poor satellite reception (tunnels, tall buildings).
    • Check navigation settings for default navigator and map updates.
  • Wi-Fi Connection Problems:
    • Ensure Wi-Fi is enabled in the settings.
    • Verify the Wi-Fi password is correct.
    • Check signal strength of the Wi-Fi network.
  • System Freeze/Unresponsive:
    • Use the RST HOLE (reset button) to perform a soft reset.
    • If persistent, consider performing a factory reset (Section 6.10, System Settings), but be aware this will delete third-party apps and settings.
  • Rear View Camera Not Displaying:
    • Check all camera wiring connections (power, video input, reverse detection).
    • Ensure the camera is receiving power when the car is in reverse.
    • Verify settings in the "Reverse Camera" menu.

9. Warranty and Support

9.1. Warranty Information

This product comes with a 1-year manufacturer's limited warranty for defective items (excluding items damaged and/or misused after receipt). Accessories typically come with a 3-month warranty.

Defective items MUST be reported and returned within the warranty period (and in the original packaging if possible). You must provide details of the defect and your order number. Warranty claims will not be honored for items with an expired warranty.

If the product(s) are not as advertised, the seller will bear all shipping costs for returns/exchanges.

9.2. Additional Resources

A detailed user manual in PDF format is available for download. This document provides further guidance and troubleshooting steps.

PDF icon View User Manual (PDF)

For further assistance, please contact MEKEDE customer support through your purchase platform.

10. Video Demonstration

Watch this video for a visual guide on the product's features and interface navigation.

Video 1: Product Features and Interface Overview.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.