1. Introduction
The PLERY R802 4G Router is a high-performance network device capable of providing high-speed Internet connection via 4G wireless networks. It features a built-in 4G LTE modem that can receive and transmit data, forwarding the signal via Wi-Fi to surrounding devices such as smartphones, tablets, and laptops.
The PLERY R802 4G router is versatile, suitable for various scenarios including home, office, travel, and outdoor activities, offering flexible and efficient mobile network solutions. Its portability and easy setup make it an ideal choice for accessing the internet where fixed broadband is unavailable. Users can enjoy a stable, fast web experience by simply inserting a suitable SIM card. The R802 also allows sharing the network with up to 32 other devices, ensuring connectivity anytime and anywhere.

2. Package Contents
Please check the package contents carefully. If any items are missing or damaged, please contact your retailer.
- 1 x PLERY R802 4G Wireless Router
- 1 x Power Adapter (DC 12V 1A)
- 1 x Ethernet Cable
- 3 x High Gain External Antennas
- 1 x Mounting Screw Set
- 1 x User Manual (this document)

3. Device Overview
The PLERY R802 router features a robust galvanized steel body designed for efficient heat dissipation and anti-interference. It includes several ports and indicators for easy setup and monitoring.
3.1. Front Panel Indicators
- 4G Signal Indicator: Shows the strength of the 4G cellular signal.
- Network Port Indicator: Indicates activity on the LAN/WAN port.
- WiFi Indicator: Shows the status of the Wi-Fi network.
3.2. Side/Rear Panel Ports
- DC 12V: Power supply connector (12V 1A).
- TYPE-C: Supports direct connection of data cables to terminal devices (can also be used for 5V 2A power supply).
- RESET: Long press for 10 seconds to restore factory settings.
- LAN/WAN: A single RJ45 10/100Mbps port that can be configured as either a Local Area Network (LAN) port for connecting local devices or a Wide Area Network (WAN) port for connecting to an external internet source (e.g., a modem).
- SIM: Nano SIM card slot.
3.3. Physical Features
- Galvanized Steel Body: Provides fast heat conduction and symmetrical heat sink design with air circulation for better heat dissipation and shielding performance.
- Side Cooling Holes: Designed to maintain optimal operating temperature.
- Foldable Antennas: Three external high-gain antennas for enhanced signal coverage and flexibility in placement.


4. Setup Instructions
Follow these steps to set up your PLERY R802 4G Wireless Router:
- Insert SIM Card: With the router powered off, carefully insert a Nano SIM card into the SIM card slot according to the indicated direction. Ensure it clicks into place.
- Attach Antennas: Screw the three high-gain external antennas onto their respective connectors on the router. These antennas are foldable for flexible positioning.
- Connect Power: Connect the provided 12V 1A power adapter to the DC 12V port on the router, then plug it into a power outlet. Alternatively, you can use a Type-C 5V 2A power source.
- Power On: The router will automatically power on. Wait for the indicators on the front panel to stabilize. The 4G signal indicator and WiFi indicator should light up.
- Connect to WiFi: On your computer or mobile device, search for available Wi-Fi networks. Connect to the default network name (SSID), which is typically
PLERY-XXXX(where XXXX corresponds to the last four digits of the router's MAC address). The default Wi-Fi password is12345678. - Access Web Interface: Open a web browser and enter
192.168.0.1in the address bar. - Login: Enter the default username and password, both are
admin. Click "Login". - Change WiFi Settings (Recommended): Navigate to the "WiFi Settings" section. Change the default Wi-Fi network name (SSID) and password to something secure and memorable. It is recommended to use WPA2(AES)-PSK security mode and a password of 8-10 letters or numbers.
5. Operating Instructions
5.1. Network Connectivity
- 4G/3G/2G WAN: The router primarily uses a Nano SIM card for internet access, supporting 4G LTE CAT4 speeds (up to 150Mbps downlink, 50Mbps uplink). It also supports 3G and 2G networks.
- LAN/WAN Switching: The single RJ45 port can function as either a LAN port (for connecting wired devices to the router's network) or a WAN port (for connecting the router to an existing wired internet source, such as a fiber modem). This configuration can be managed through the web interface.

5.2. Wi-Fi Network
- Wi-Fi 6 (802.11b/g/n/ax): Provides high-speed Wi-Fi at 2.4GHz with up to 300Mbps.
- Multi-Device Support: The router can support up to 32 devices connected simultaneously.
- Wi-Fi Settings: Through the web interface, you can manage SSID broadcast, hide Wi-Fi name, set security modes (WEP, WPA-PSK, WPA2-PSK, WPA/WPA2), adjust Wi-Fi frequency and channel, and configure MAC IP address blacklists/whitelists and user access restrictions.

5.3. Advanced Software Features
The PLERY R802 integrates various practical functions accessible via the web interface:
- 4G/3G Features: Auto-APN, Auto dial-up, Roaming, USSD, Data limited, PIN Management.
- Network Management: URL Filter, QoS speed limit, System Log, Traffic Statistics, Ping/Traceroute, iPerf Speed Test, IPv4/IPv6.
- Security: Built-in Firewall, MAC IP Address Blacklist and Whitelist, User Access Restrictions.
- VPN: Supports PPTP/L2TP protocols.
- Other: Band Lock, IMEI modification, TTL support, Local Firmware Upgrade.

6. Maintenance
- Factory Reset: To restore the router to its factory default settings, press and hold the RESET button on the side panel for 10 seconds. This will erase all custom configurations.
- Heat Dissipation: The galvanized steel body and side cooling holes are designed for optimal heat dissipation. Ensure the router is placed in a well-ventilated area and that the cooling holes are not obstructed.
- Environmental Conditions: Operate the device within the specified working temperature (-10°C to 55°C) and humidity (10% to 90%RH non-condensing) ranges to ensure longevity and stable performance.
7. Troubleshooting
- SIM Card Not Detected:
- Verify that the Nano SIM card is inserted in the correct direction as indicated on the device.
- Ensure the SIM card is inserted *before* powering on the device.
- Check if the SIM card has a PIN lock. If so, unlock it using a mobile phone before inserting it into the router.
- "Unknown" Prompt from Internet Service Provider (ISP): If the device displays "Unknown" but network information and signal strength appear normal, it typically will not affect internet access.
- Manual APN Settings Required: Some ISPs may require manual APN (Access Point Name) configuration. Refer to your local ISP's documentation for the correct APN settings and configure them via the router's web interface.
- Poor Signal Strength: If experiencing weak signal, ensure the router's external antennas are properly installed and positioned. Avoid placing the router in areas with significant signal obstruction, such as basements or heavily shielded environments.
- No Internet Access:
- Check the 4G signal indicator on the front panel. If it's off or red, there might be no signal or a problem with the SIM card.
- Verify that your SIM card has an active data plan.
- Ensure the LAN/WAN port is correctly configured if using a wired internet source.
8. Specifications
| Category | Specification |
|---|---|
| Model | R802 |
| Chipset | ZX7520V3T; AIC8800DW |
| CPU Frequency | 2.4 GHz |
| Flash | 128Mb NOR |
| Wi-Fi Standard | WiFi6 2.4GHz 802.11b/g/n/ax |
| Wi-Fi Transmission Rate | 300 Mbps (2.4G) |
| LTE Category | CAT4 |
| LTE Speeds | DL 150Mbps; UL 50Mbps |
| SIM Card Slot | 1 x Nano SIM |
| Ethernet Ports | 1 x RJ45 10/100Mbps (LAN/WAN) |
| Other Interfaces | 1 x Reset Button, 1 x Type-C Port, 1 x DC Power Port |
| Antenna Type | External, Foldable (1 x WiFi, 2 x LTE 5dBi) |
| Power Supply | DC 12V 1A, Type-C 5V 2A |
| Power Consumption | ≤10W |
| Protection Class | IP31 |
| Operating Temperature | -10°C ~ 55°C |
| Storage Temperature | -40°C ~ 70°C |
| Operating Humidity | 10% ~ 90%RH (non-condensing) |
| Storage Humidity | 5% ~ 95%RH (non-condensing) |
| Certifications | CE/FCC/UL/RoHS |
| Dimensions (H x W x D) | 292.3mm x 93.4mm x 26.2mm (with antennas extended) |


8.1. Supported Network Frequency Bands by Region
The PLERY R802 supports various LTE and WCDMA bands across different regions. Please refer to the table below to ensure compatibility with your local network provider.

9. User Tips
- SIM Card Compatibility: The router is compatible with various Nano SIM cards, including those from budget phone data sharing plans. Ensure your SIM card has an active data plan.
- Signal Strength: For optimal performance, avoid placing the router in areas with poor signal penetration, such as basements or heavily constructed buildings. External antennas help, but extreme conditions can still affect connectivity.
- Single LAN/WAN Port: Note that the router features a single RJ45 port that functions as either LAN or WAN. Plan your network setup accordingly if you require multiple wired connections.
10. Warranty and Support
10.1. Warranty Information
This product comes with a warranty to ensure your after-sales service rights. Please review the following conditions regarding warranty coverage:
- Product malfunction or damage resulting from improper installation, use, maintenance, or storage not in accordance with the user manual.
- Repairs requested beyond the specified warranty or replacement period.
- Unauthorized alteration or destruction of the product's barcode.
- Unauthorized modification of inherent configuration files or disassembly of the product without permission.
- Damage caused by accidental factors or human actions, such as applying inappropriate voltage, exposure to high temperatures or water, mechanical damage, drops, severe oxidation, or rust.
- Damage incurred during transportation or handling when returned for repair.
- Failures or damages caused by force majeure events (e.g., earthquakes, fires, lightning strikes).
- Other malfunctions or damages not attributable to the product's design, technology, manufacturing, or quality issues.
For situations not covered under free maintenance, our company may offer paid services.
10.2. Contact Information
Shenzhen Plery Network Tech Co., Ltd.
Address: LongshengHengbo Center 2202, Longhua District, Shenzhen
Tel: 0755-21004845
Website: www.plery.cn
11. Frequently Asked Questions (FAQ)
- Q: Does this router support bridge mode?
- A: The provided information does not explicitly state support for bridge mode. The LAN/WAN port can be configured, but specific bridge mode functionality is not detailed.
- Q: Does it work in repeater mode?
- A: The documentation does not explicitly mention support for repeater mode.
- Q: Is this router compatible with LTE networks in Europe?
- A: Yes, the PLERY R802 supports various LTE bands commonly used in Europe, including B1, B3, B5, B7, B8, B20, B28AB, B38, B40, and B41. Please refer to the "Supported Network Frequency Bands by Region" table in the Specifications section to confirm compatibility with your specific country and carrier.