Introduction
Thank you for purchasing the NEEWER CA013 Car Mobile Phone Holder Camera Suction Cup Gimbal. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
The NEEWER CA013 is a versatile mounting solution designed for cameras and mobile phones, featuring a strong vacuum suction cup, an aluminum alloy construction, and a flexible ball head magic arm. It offers exceptional load-bearing capacity and wide compatibility for various shooting scenarios.
Package Contents
Please check the package to ensure all items are present:
- 1 x Suction cup holder
- 1 x Magic Arm
- 1 x Motion camera stand
- 1 x 3/8, 1/4 screw adapter
- 1 x 3/8 screw adapter
- 1 x User Manual

Specifications
| Feature | Detail |
|---|---|
| Product Model | CA013 |
| Product Material | Aluminum alloy, silica gel |
| Product Weight | 546g |
| Height | 6.6cm |
| Suction Cup Diameter | 15.3cm |
| Compatible Action Camera Brands | GoPro, Insta360, DJI |
| Type | Suction |
| Maximum Load (Moving) | 5kg |
| Maximum Load (Horizontal) | 50kg |
| Maximum Load (Vertical) | 40kg |


Setup Instructions
1. Attaching the Suction Cup
The suction cup is designed for smooth, flat, and non-porous surfaces such as glass windows, ceramic tiles, wooden tables, and metal plates.

- Step 1: Place the suction cup. Place the suction cup on a clean, smooth surface.
- Step 2: Engage the vacuum pump. Keep pushing the air pump button until the white line disappears. This indicates that the vacuum is fully engaged and the installation is complete.

IMPORTANT: Please make sure that the white line always stays inside the air pump. Otherwise, the suction is not strong enough, which may cause the device to fall.

2. Assembling the Magic Arm and Camera Mount
The suction cup pan-tilt features multiple mounting interfaces for expansion.

- Attach the magic arm to the suction cup holder using the appropriate screw adapter (3/8 or 1/4 inch) as needed. The magic arm has a non-slip rubber pad and an adjusting knob.
- Secure your camera, mobile phone holder, or action camera adapter to the other end of the magic arm. The magic arm allows for 360° rotation.
- Ensure all connections are tightened using the adjusting knobs and anti-slip tooth patterns for a secure setup.


Operating Instructions
1. Adjusting Angles and Position
The magic arm allows for flexible adjustment of shooting angles. Loosen the adjusting knob on the magic arm to reposition your camera or phone, then tighten it firmly to secure the desired angle.

2. Load Bearing Capacity
The suction cup offers excellent load-bearing capacity depending on the orientation:
- Moving Status: Maximum load 5kg (e.g., mounted on a moving vehicle).
- Horizontal State: Maximum load 50kg (e.g., mounted on a flat surface horizontally).
- Vertical State: Maximum load 40kg (e.g., mounted on a vertical surface like a window).

Removal Instructions
To remove the suction cup:
- Step 3: Press the quick release button. When disassembling, just press the quick release button on the side to pop up the air pump. This will quickly release the vacuum, allowing for easy removal.

Maintenance
- Keep the suction cup and mounting surfaces clean and free of dust, dirt, and oils to ensure maximum adhesion.
- Periodically check all screws and knobs for tightness to prevent accidental detachment of equipment.
- Store the suction cup in a clean, dry place when not in use.
- Avoid exposing the suction cup to extreme temperatures for prolonged periods, as this may affect the material integrity.
Troubleshooting
- Problem: Suction cup does not adhere strongly or falls off.
Solution:
- Ensure the mounting surface is perfectly smooth, flat, and non-porous. Uneven surfaces (e.g., textured wallpaper) will prevent proper suction.
- Clean both the suction cup and the mounting surface thoroughly to remove any dust, dirt, or moisture.
- Verify that the white line indicator on the air pump is fully retracted (not visible) after pumping. If it's visible, continue pumping until it disappears.
- Avoid mounting on surfaces that are too cold or too hot, as extreme temperatures can affect the suction material.
- Problem: Suction cup is difficult to remove.
Solution: Ensure you press the quick release button on the side of the suction cup firmly. This will break the vacuum seal, allowing for easy removal. Do not attempt to pry it off without releasing the vacuum.
User Tips
- For critical applications or heavy equipment, always perform a test suction on the intended surface before attaching your valuable gear.
- While the suction is strong, be mindful of the weight of your equipment, especially when mounting in a moving vehicle.
- If using on a car, consider mounting on a window or a smooth, flat part of the bodywork for best results. Avoid textured or uneven painted surfaces.
Warranty and Support
For any questions, technical support, or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.