Bykski A-GV9070GMOC-X

Contents

Bykski GPU Water Block A-GV9070GMOC-X User Manual

Model: A-GV9070GMOC-X | Brand: Bykski

1. Product Introduction & Usage

This Bykski GPU water block is designed for high-performance PC thermal management, specifically for the Gigabyte Radeon RX 9070 XT GAMING OC 16G video card. It features a full-cover design with a backplate and is compatible with standard G1/4" thread fittings. The block is engineered to provide efficient cooling for your graphics card, enhancing stability and performance.

Product Features:

  • T2 Copper, Efficient Heat Conduction: Utilizes T2 copper for superior thermal transfer.
  • 0.3MM Jet Microchannel: Features a 0.3mm jet microchannel design to improve heat absorption, with up to 50 waterways increasing the water contact area to 13560 mm².
  • Frosted Texture Backplate: High-quality aluminum backplate with a frosted texture for full protection and aesthetic appeal.
  • Extended Copper Plate: The copper plate length is extended to 126.893mm to maximize water coverage area.
  • Three-Layer Structure Design: Bykski's second-generation three-layer structural design increases water flow coverage, making the water flow more scientific and improving heat dissipation efficiency.
  • Lightweight Design: Reduces the weight of the cold head and protects the PCB from deformation. Electroless nickel plating surface treatment process (0.001-0.002mm coating thickness) prevents corrosion.
  • 8.5mm Copper Plate Design: Sufficient materials with a single-layer sealing ring design effectively reduce the risk of liquid leakage.
  • Rhythm of Light and Shadow: Supports 12V RGB & 5V A-RGB with two lighting modes for customizable PC aesthetics.

Product Video:

Video demonstrating the features and design of the Bykski GPU water block.

Compatibility:

This GPU water block is compatible with the Gigabyte Radeon RX 9070 XT GAMING OC 16G video card. Please ensure your graphics card's PCB matches the layout shown in the compatibility diagram before purchase.

PCB compatibility diagram for Gigabyte Radeon RX 9070 XT GAMING OC 16G

Diagram illustrating the compatible PCB layout for the Gigabyte Radeon RX 9070 XT GAMING OC 16G.

2. Technical Specifications

General:

  • Type: VGA Front Water Block
  • Model Number: A-GV9070GMOC-X
  • Material: Copper, Aluminum, Acrylic
  • RGB Support: A-RGB (5V 3PIN)
  • Support Pump Type: Pump

Dimensions:

Product size drawing with dimensions

Detailed dimensions of the GPU water block and backplate.

Approximate Product Dimensions (mm)
ComponentLengthWidthThickness
Water Block (Top View)219.95149.4726.25
Backplate (Top View)219.95119.475.98

Thermal Properties:

Thermal conductivity of materials

Diagram illustrating thermal conductivity of various materials used in water blocks.

Thermal conductivity resistance diagram

Diagram illustrating thermal conductivity resistance and heat transfer principles.

Convective heat transfer diagram

Diagram illustrating convective heat transfer principles and related parameters.

Package Information:

  • Length: 25 cm
  • Width: 15 cm
  • Height: 8 cm
  • Weight: 1.4 kg

3. Setup Guide

Included Components:

  • Water Block *1
  • Backplate *1
  • Sync Motherboard light strip *1
  • Thermal Paste * 1 Set
  • Water Plug* 2
  • Mount Screws, Nut, Spring* 1 Set
Contents of the Bykski GPU water block package

Image showing the water block, backplate, and various accessories included in the package.

Installation Steps:

  1. Inspect the product for any physical damage before installation.
  2. Prepare the GPU: Remove the original radiator from your graphics card. Clean up the original circuit and chip residue.
  3. Apply Thermal Material: Apply silicone grease/thermal paste to the GPU core and memory modules, or paste silicone pads as appropriate.
  4. Install Fittings: Install the appropriate G1/4" thread fittings and ensure O-rings are securely in place.
  5. Secure the Water Block: Fix the cold head (water block) to the graphics card. Align the screw column with the water cold head on the graphics card. If the cold head does not fit the graphics card, do not force it; contact a technician to avoid damage.
  6. Install Backplate: For the graphics card with its own backplane and the cold head ordered with the backplane, after placing the backplane on the back of the graphics card, use the backplane screws to lock the corresponding screw holes.
  7. Mount to Chassis: Secure the assembled component to the designated PC chassis or hardware mount.
  8. Crucial Leak Test: Conduct a 24-hour leak test using a jump-start bridge (powering only the pump) before turning on the entire PC system.
Diagram showing installation steps for applying thermal paste and mounting the water block and backplate

Visual guide for applying thermal material and securing the water block and backplate.

List of installation parts for the GPU water block

Diagram showing the various parts included for installation, such as screws, gaskets, and thermal pads.

4. Operating Guidelines

Usage Restrictions:

  • Do not mix aluminum and copper components in the same loop to avoid galvanic corrosion.
  • Use only specialized PC coolants.

Radiator Notice:

The condenser is pressure tested before leaving the factory. The fins are soft, and in rare cases, transportation vibration may cause slight deformation. If the fins are slightly skewed, it is a common phenomenon in the industry and does not affect performance. If the waterway is damaged, please contact the seller's customer service immediately. It is recommended to use a professional radiator cleaning solution to clean before use to avoid impurities entering the waterway.

5. Maintenance & Storage

Maintenance:

  • Flush the loop every 6-12 months to prevent sediment buildup.

Storage:

  • Store in a cool, dry place when not in use.
  • Avoid direct sunlight on acrylic parts to prevent cracking.

6. Troubleshooting

Common Issues & Solutions:

  • Coolant Leakage: Always perform a pressure or leak test before full system power-on. Improper installation is the primary cause of leaks.
  • Electrical Malfunction (RGB/D-RGB): Ensure all RGB/D-RGB cables are connected to the correct voltage headers (e.g., 5V vs 12V). Wrong connection may cause short circuits or fire.
  • Fins Deformation (Radiator): Slight deformation of radiator fins due to transportation is common and does not affect performance. If the waterway is damaged, contact customer service.

7. User Tips

  • Thermal Pad Thickness: For optimal contact, approximately 1.5mm thick thermal pads are recommended for the RAM and voltage ICs. Chokes may require slightly thicker pads.
  • Thermal Putty: Consider using thermal putty for easier installation and improved contact on certain components.

8. Compliance & Certifications

This product complies with international safety and environmental standards.

  • Compliance Mark: CE (Conformité Européenne) / RoHS
  • Standards: Built in accordance with EU Directive 2011/65/EU and its amendment directives on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

For a detailed user manual in PDF format, please refer to the official documentation: User manual (PDF)

9. Warning & Safety Information

IMPORTANT WARNING / SAFETY INFORMATION

  • LEAKAGE RISK: Improper installation may cause coolant leakage, leading to permanent damage to electronic components. Always perform a pressure or leak test before full system power-on.
  • ELECTRICAL SAFETY: Ensure all RGB/D-RGB cables are connected to the correct voltage headers (e.g., 5V vs 12V). Wrong connection may cause short circuits or fire.
  • CHEMICAL SAFETY: Keep coolants out of reach of children. If ingested, seek medical attention immediately.
  • CHOKING HAZARD: This product contains small parts (screws, fittings). Keep away from children under 3 years old.

10. Warranty & Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.