FDIK T6 8KW

Contents

FDIK T6 8KW Diesel Air Heater Instruction Manual

Model: T6 8KW

Versatile Heating for Garages, Warehouses, Vehicles, and Outdoor Applications

1. Introduction

Thank you for choosing the FDIK T6 8KW Diesel Air Heater. This portable and efficient heating solution is designed to provide warmth in various environments, including garages, warehouses, cabins, RVs, boats, trucks, and camping setups. Featuring multi-voltage compatibility (12V, 24V, 220V), an LCD control panel, and remote control functionality, this heater offers convenience and reliable performance. Please read this manual thoroughly before installation and operation to ensure safe and optimal use of your device.

FDIK 8KW Diesel Air Heater with 12V, 24V, and 220V compatibility
FDIK 8KW Diesel Air Heater, showcasing its multi-voltage compatibility.

2. Safety Information

  • Always operate the heater in a well-ventilated area.
  • Exhaust Gas Warning: Exhaust gas contains poisonous gas. During operation, the exhaust port MUST be mounted outdoors to prevent carbon monoxide buildup.
  • Ensure all electrical connections are secure and correctly wired according to the specified voltage (12V, 24V, or 220V).
  • Do not block the air inlet or outlet. Maintain adequate clearance around the heater for proper airflow.
  • Keep flammable materials away from the heater.
  • Regularly inspect the fuel lines and connections for leaks or damage.
  • Do not attempt to repair or modify the heater yourself. Contact qualified personnel for service.

3. Package Contents

Verify that all items are present in your package:

FDIK T6 8KW Heater Package Contents
Complete package contents for the FDIK T6 8KW Diesel Air Heater.
  • FDIK T6 8KW Diesel Air Heater Unit
  • LCD Control Panel
  • Remote Control
  • 220V Power Adapter
  • Exhaust Pipe
  • Muffler
  • Air Inlet Pipe
  • Fuel Tank (integrated or external, depending on model variant)
  • Fuel Pump
  • Mounting Plate
  • Hoses, Clamps, and Screws for installation
  • User Manual (this document)

4. Specifications

FeatureSpecification
ModelT6 8KW
Voltage12V / 24V / 220V
Heating Power8KW
FuelDiesel
Fuel Tank Capacity3.5 Liters (approx.)
Fuel Consumption0.15 - 0.55 L/H
Heating SpaceUp to 20 m²
Shell MaterialMetal
Switch TypeLCD Color Screen
Working Temperature-40°C to 40°C
Item Height26 cm
Item Width25 cm
Item Length36.5 cm
CertificationsCE, RoHS
FDIK Air Heater Dimensions and Specifications
Dimensions and key specifications of the FDIK Air Heater.

5. Setup and Installation

5.1 General Installation Guidelines

  • Choose a stable and level surface for the heater.
  • Ensure proper ventilation and clearance around the unit.
  • Exhaust System: The exhaust pipe must be routed to the outside of the enclosed space. The muffler should be mounted horizontally, with its small drainage hole facing downwards.
  • Power Interface: The power interface uses red for the positive pole and black for the negative pole. Ensure correct polarity when connecting to a 12V or 24V DC source. For 220V AC operation, use the provided power adapter.
FDIK Heater Features: Metal Case, Portable, Power Interface
Key features including the durable metal case, portability, and clearly marked power interface.

5.2 Heating Principle

The heater operates by drawing cold air from the air inlet. This air then passes through a heated aluminum body, where it absorbs heat. The now hot air is then blown out from the air outlet, providing warmth to the surrounding area. The integrated 3.5L fuel tank supplies diesel to the combustion chamber.

Heating Principle Demonstration Diagram
Diagram illustrating the heating principle and components like the 3.5L fuel tank.

5.3 Internal Components Overview

Exploded View of FDIK Heater Components
Exploded view of the heater's internal components, including the heating zone, glow plug, and control box.

Key internal components include:

  • Heating zone
  • Overheat protection device
  • Flame retardant impeller
  • Control box
  • Air fan
  • Glow plug
  • Combustion chamber
  • Motor assembly

6. Operation

6.1 Control Panel

The LCD control panel allows you to manage the heater's functions. It typically includes:

  • Function Mode Setting: To select different operating modes.
  • Adjust Temperature/Power: To set the desired heating level.
  • Power Switch Setting: To turn the unit on or off.
LCD Control Panel Details
Detailed view of the LCD control panel with function mode, temperature/power adjustment, and power switch settings.

6.2 Remote Control

The included remote control allows for convenient operation from a distance. Under barrier-free conditions, the maximum remote control distance is approximately 30 meters.

Remote Control Usage
Remote control in use, demonstrating its range for turning the heater on/off.

6.3 Quick Heating Performance

The FDIK Air Heater is designed for rapid heating, providing warmth quickly after activation.

Quick Heating Performance Graph
Graph comparing the faster temperature rise of the FDIK Air Heater against other models.

7. Maintenance

  • Regular Cleaning: Keep the air inlet and outlet free from dust and debris. Use a soft, dry cloth to clean the exterior of the heater.
  • Fuel System Check: Periodically inspect fuel lines for cracks, leaks, or blockages. Ensure the fuel filter (if external) is clean.
  • Electrical Connections: Check all electrical connections for tightness and signs of corrosion.
  • Exhaust System: Ensure the exhaust pipe and muffler are clear and securely attached.
  • Storage: If storing the heater for an extended period, ensure the fuel tank is empty or filled with fresh fuel and the unit is clean and dry.

8. Troubleshooting

Refer to the table below for common issues and their solutions:

Fault CodeCauseWorkaround
E-2Supply voltage range errorNormal range: 24V (18-32V), 12V (9-16V). Check whether the battery or generator is normal and whether the fuse is aging.
E-3Glow plug failureCheck whether the ignition plug connector is loose or the wire is short-circuited to the housing. Check whether the ignition plug is damaged.
E-4Oil pump failureCheck whether the oil pump connecting wires and connectors are damaged, loose, oxidized, short-circuited, or open-circuited.
E-5High temperature alarm (intake air>50°C; housing>230°C)Check whether the heating air duct is unobstructed. Check whether the fan is operating normally. Check whether the temperature sensor is normal.
E-6Fan failureCheck if the impeller is stuck. Check whether the connection plug is loose. Is the gap between the magnet on the wind wheel and the Hall sensor on the controller too large? Is the circuit short-circuited or open-circuited? Is the motor leaking electricity?
E-7Connection failedDetection harness.
E-8Lack of oilCheck whether there is oil shortage, oil solidification at low temperature, oil line blockage, oil pump stuck, etc. Check whether the oxygen inlet and exhaust pipes are unobstructed. Check whether the shell temperature sensor is in full contact with the shell and whether the pressure spring is firm.
E-9Sensor failureCheck whether the temperature sensor connection line or connector is damaged or loose, and whether the sensor is damaged.
E-10Startup failureThe casing temperature is too high and the casing cannot cool down after 3 minutes of startup. A lot of white smoke comes out of the exhaust gas. There is a small amount of white smoke or no smoke in the exhaust gas. a. Check whether the ignition plug is damaged. b. Is the gap between the inner wind wheels too large?

9. User Tips

  • Fuel Type: This heater is designed exclusively for diesel fuel. Do not use petrol or any other fuel type, as this can cause damage and safety hazards.
  • White Smoke on Startup: If the heater produces white smoke and fails to start (Error E-10), check the ignition plug for damage and ensure the gap between the inner wind wheels is correct. Also, verify that the fuel supply is consistent and not blocked.
  • Power Adapter Use: When operating on 220V AC, always use the provided power adapter to ensure correct voltage conversion and safe operation.
  • Remote Control Range: For optimal remote control performance, ensure there are no significant physical barriers between the remote and the heater.
Heater connected to 220V power outlet
The FDIK heater connected to a 220V power outlet using the included adapter.

10. Warranty and Support

10.1 Warranty Information

The FDIK T6 8KW Diesel Air Heater comes with a one-year warranty. Please note that vulnerable parts are not included under this warranty. Keep your purchase receipt as proof of purchase.

10.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact FDIK customer service. You can reach us online via WhatsApp at +86 15935111083.

© 2024 FDIK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.