1. Introduction
This manual provides instructions for the JMGO Bluetooth Voice Projector Remote Control. It is designed for efficient and hassle-free control of various JMGO projector models, offering both long-range accuracy and low power consumption.

The remote is crafted from durable ABS plastic with soft rubber buttons, ensuring a comfortable grip and resistance to dust. It utilizes dual IR & RF wireless communication for reliable signal transmission.
2. Safety & Warnings
- Warning! This product is intended for adult use only.
- Keep out of reach of children and pets to prevent accidental injury or ingestion.
- Before use, ensure the remote control is correctly installed and free from any damage.
- If you observe abnormal noise or equipment error after installation, immediately stop using the device.
- Always follow all instructions for proper use; misuse may cause harm.
- Store the remote in a dry and shady place, away from high temperatures, humidity, and direct sunlight.
3. Product Overview
The JMGO Bluetooth Voice Remote Control is available in Black and White variants, featuring a sleek design with clearly labeled buttons for intuitive operation.


Key features include a power button, microphone button for voice commands, navigation pad, back button, menu button, volume controls (+/-), and a dedicated button for accessing applications.
4. Setup
This remote control does not require a dedicated app for operation and is designed for easy, hassle-free use with JMGO projectors.
4.1 Initial Pairing (for JMGO N1S Pro and similar models)
- Ensure your JMGO projector is powered on and in pairing mode (refer to your projector's manual for specific instructions on entering pairing mode).
- On the remote control, typically press and hold the "OK" button (center of the navigation pad) and the "Volume Down" button simultaneously for a few seconds.
- The remote's indicator light (if present) should start blinking, indicating it's in pairing mode.
- Once the remote appears on your projector's Bluetooth device list, select it to complete the pairing process.
- A confirmation message should appear on your projector screen, and the remote's indicator light should stop blinking, indicating successful pairing.
If pairing fails, ensure the remote is within range of the projector and try the steps again. Replace batteries if necessary.
5. Operating Instructions
5.1 Basic Navigation
- Use the directional pad (up, down, left, right) to navigate through menus and content on your projector.
- Press the "OK" button (center of the directional pad) to select items or confirm actions.
- The "Back" button (usually an arrow icon) allows you to return to the previous screen or menu.
- The "Menu" or "Home" button (often a house or grid icon) typically takes you to the main menu or home screen of your projector.
5.2 Voice Control
- Press and hold the "Microphone" button (usually located near the top of the remote) to activate voice command functionality.
- Speak clearly into the remote's microphone to issue commands, search for content, or control projector settings.
- Release the microphone button when you have finished speaking.
5.3 Volume Control
- Use the "+" button to increase the volume.
- Use the "-" button to decrease the volume.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the remote in a dry and shady place. Keep it away from high temperatures, humidity, direct sunlight, and out of reach of children and pets.
- Battery Replacement: If the remote's performance degrades, replace the batteries with new ones of the correct type. Ensure proper polarity when inserting new batteries.
7. Troubleshooting
- Remote not responding:
- Check if the batteries are correctly inserted and have sufficient charge. Replace if necessary.
- Ensure there are no obstructions between the remote and the projector.
- Try re-pairing the remote control with your projector (refer to Section 4.1).
- Voice control not working:
- Ensure the remote is properly paired via Bluetooth, as voice functionality often relies on Bluetooth connectivity.
- Check your projector's settings to ensure voice control is enabled.
- Some users have reported issues with microphone support; if problems persist after re-pairing and checking settings, contact customer support.
- Abnormal noise or equipment error:
- If the remote or projector exhibits abnormal noise or errors, stop using the device immediately.
- Contact customer support for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | For JMGO P1 P2 P3 P5 N1S Pro/N1S Ultra/N1 Air/N1/Nano/O2/O1S/N1 Pro J7 |
| Wireless Communication | RF, IR (Dual IR & RF) |
| Frequency | 433 MHz |
| Channel | 8 |
| Material | Durable ABS Plastic, Soft Rubber Buttons |
| Color Options | Black, White |
| High-concerned Chemical | None |
9. User Tips
- First Use Check: Always ensure the remote control is free from any damage before its initial use.
- Optimal Performance: For best long-range accuracy and low power consumption, maintain a clear line of sight or close proximity to your JMGO projector.
- Voice Command Clarity: When using voice control, speak clearly and directly into the microphone for accurate recognition.
- Color Variation: Be aware that the actual color of the item may appear slightly different from images due to light reflection and display variations.
10. Warranty & Support
10.1 Manufacturer Information
Manufacturer: Ji' nan shengguang network science and technology development co., ltd
Address: 601 Code: 250000, Building 1, Cape of Good Hope, No.800 Minghu West Road, tianqiao district, Jinan, Shandong, China
Contact: dlabi1sgwr5@163.com / +86 18927322642
EU Authorized Representative: Outong GmbH, Brehmstr, 56, 40239 Duesseldorf, Germany
EU Contact: info@outong.de / +49 21131054698
10.2 Warranty Information
This product comes with a 12-month manufacturer's limited warranty for defective items, excluding items damaged or misused after receipt. Accessories are covered by a 3-month warranty.
Defective items must be reported and returned within the warranty period, ideally in their original packaging.
10.3 Additional Resources
A detailed user manual in PDF format is available for further information: User Manual (PDF)