Introduction
The CENFAYA GL-C-218M Matter RGBCCT LED Strip Controller is designed to integrate your LED strip lighting into modern smart home ecosystems. Utilizing the Matter protocol, this controller offers broad compatibility with platforms such as Apple HomeKit, Amazon Alexa, and Google Assistant, enabling convenient app and voice control. Its robust design, featuring flame-retardant PC material and an IP20 rating, ensures durability and safe operation in indoor environments. This manual provides detailed instructions for setup, operation, and maintenance to help you maximize your smart lighting experience.
Image: The GL-C-218M Matter WIFI RGBCCT LED Controller, showcasing its compatibility with Apple HomeKit, Amazon Alexa, and Google Assistant, alongside various smart speakers.
Safety Information
- Ensure the input voltage is within the specified DC12-24V range.
- Do not exceed the total output current of 20A Max or 15A Max per channel.
- Operate the device within the recommended temperature range of -20°C to +45°C.
- This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against liquids. Avoid exposure to water or high humidity.
- Ensure all wiring is correctly connected and secured before powering on the device.
- Avoid installing the controller in metal-shielded areas or near strong magnetic fields, as this may interfere with wireless signals.
Package Contents
Verify that all items are present in your package:
Image: Diagram showing the contents included in the product package.
- Packaging Box x 1
- Smart RGBCCT Strip Controller x 1
- User Instruction x 1 (This manual)
- 3cm Sticker x 1
Specifications
Image: Detailed product parameters for the GL-C-218M controller.
| Parameter | Value |
|---|---|
| Model No. | GL-C-218M |
| Input Voltage | DC 12-24V |
| Output Current/Channel | 15A Max |
| Total Output Current | 20A Max |
| Protocol | Matter |
| Suggested Wire Type | 0.34-4mm² (22-12AWG) |
| Stripping Length | 10mm |
| Material | Flame Retardant PC |
| Operating Temperature | -20°C to +45°C |
| Protection Rating | IP20 |
| Dimensions | 108x45x18mm |
| Net Weight (N.W.) | 56.1g |
| Gross Weight (G.W.) | 63.5g |
Setup
1. Wiring the Controller
The GL-C-218M controller features quick connect ports for easy and secure wiring.
Image: Step-by-step guide for wiring using the quick connect ports.
- Open the connector: Gently push the connector tab upwards to open the port.
- Insert the wire: Insert the stripped end of your LED strip wire (0.34-4mm² / 22-12AWG, 10mm stripping length) into the open port.
- Secure the wire: Press the connector tab down firmly to secure the wire. Ensure the connection is tight.
2. Power Input Methods
The controller supports two methods for power input:
Image: Illustration of the V+, V- power interface and the 5.5x2.1mm DC Socket.
- V+, V- Power Interface: Use the screw terminals for direct wire connection from your DC 12-24V power supply.
- 5.5x2.1mm DC Socket: Connect a compatible DC 12-24V power adapter directly into this socket.
3. Network Connection (Matter Pairing)
A Matter-enabled hub (e.g., Apple HomePod, Amazon Echo Dot, Google Nest Mini) is required to connect the controller to your smart home system.
Image: A smartphone displaying the 'Add Accessory' screen, emphasizing the need for a Matter-enabled hub to scan the QR code for device connection.
Image: Six-step visual guide for connecting the controller to a smart home network via the Apple Home app.
- Open your smart home app: Click the plus icon (usually in the top right corner) of your smart home app (e.g., Apple Home app). Select "Add or Scan Accessories".
- Scan the QR code: Align the scanning frame with the QR code located on the controller and scan it successfully.
- Add to Home: A prompt to add accessories will appear. Tap "Add to Apple Home" (or equivalent for your platform).
- Assign to a room: After a successful search, select the desired room for the controller and click "Continue".
- Name the controller: Modify the controller's name (optional) for easy identification, then click "Continue".
- Complete setup: The system will confirm that the device has been added. Click "Done" to start using your controller.
Important Note:
- Ensure your smart speaker (hub) is added and online within the app.
- For Apple HomeKit, the iOS device system and HomePod version need to be 16.1 or above.
Operating Instructions
1. Smartphone App Control
Once connected to your smart home platform, you can control your LED strips using the respective smartphone app.
Image: A hand holding a smartphone displaying an app interface for controlling extended color light, showing brightness and color selection options.
- Color Selection: Choose from 16 million colors to match your mood or decor.
- Color Temperature Adjustment: Adjust the white light from warm to cool tones.
- Brightness Adjustment: Dim or brighten your lights from 1% to 100%.
Image: A collage showing the app interface for 16 million color changes, color temperature adjustment, and brightness adjustment from 1% to 100%.
2. Voice Control
Control your LED strips hands-free using voice commands through your Matter-enabled smart speaker (e.g., HomePod, Echo Dot, Google Nest).
Image: A HomePod responding to voice commands like "Hey Siri, Turn on the living room light." and "Hey Siri, Brightness increased to 70%.", demonstrating voice control functionality.
- Ensure your controller and smart speaker are on the same network.
- Use commands specific to your smart assistant (e.g., "Hey Siri, turn on the living room light," "Alexa, set brightness to 50%," "Hey Google, change light to blue").
3. Button Functions
The controller features built-in buttons for basic control and reset functions.
Image: Diagram illustrating the functions of the On/Off/Dimmer, Reset, and external Push buttons on the controller.
- On/Off/Dimmer Button (1):
- Short press: Power on/off the LED strip.
- Long press: Adjust brightness (cycle through brightness levels).
- Reset Button (2): Used for factory reset (see Troubleshooting).
- External Push Button (3 - optional connection):
- Short Press: Cycle through preset colors (Red → Yellow → Green → Mixed White → Blue → Purple → Warm White → Cold Warm Mixed White → Cold White).
- Long Press for 5 seconds: Reset the controller, entering network pairing mode.
Maintenance
- Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the controller to prevent overheating.
- Regularly check wiring connections for any looseness or damage.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
Troubleshooting
- Controller not responding:
- Check power connections. Ensure the power supply is providing the correct DC12-24V. Verify that the LED strip is correctly wired to the controller.
- Cannot connect to smart home app:
- Ensure your Matter-enabled hub (e.g., HomePod, Echo Dot, Google Nest Mini) is powered on and connected to the internet.
- Verify that your smartphone and the hub are on the same Wi-Fi network.
- Check if your smart home app and hub firmware are up to date. For Apple HomeKit, iOS and HomePod versions should be 16.1 or above.
- Try resetting the controller and re-initiating the pairing process.
- How to reset the controller:
- Method 1 (Button Reset): Long press the 'Push' button (if an external switch is connected) for 5 seconds.
- Method 2 (Power Cycle Reset): Power off the controller, then power it on 5 times consecutively. This will reset the controller and put it into network pairing mode.
- LED strip not displaying correct colors/brightness:
- Ensure the LED strip type (RGBCCT) matches the controller's capabilities. Check the wiring of each color channel (R, G, B, C, T, V+) to ensure they are correctly connected.
- Voice control not working:
- Confirm that the controller is successfully paired with your smart home hub and that the hub is online. Ensure the controller and hub are on the same network. Check the device name in your app for accurate voice commands.
User Tips
- For optimal performance and security, always keep your smart home hub's firmware and your smart home app updated to the latest versions.
- When setting up, place the controller within a reasonable range of your Wi-Fi router and Matter-enabled hub to ensure a stable connection.
- Consider using the external push button for quick access to color cycling, especially if you frequently switch between different lighting moods without using your phone or voice commands.
- If you experience connectivity issues, a quick power cycle of both the controller and your Wi-Fi router can often resolve minor network glitches.
Warranty and Support
The CENFAYA GL-C-218M Matter RGBCCT LED Strip Controller comes with a 2-year warranty, covering manufacturing defects and malfunctions under normal use. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Please have your model number (GL-C-218M) and purchase information ready when contacting support.
Image: Table outlining the key features, technical implementation, and use cases of the Matter protocol, highlighting its benefits for cross-brand interoperability, security, multi-protocol support, and local control.
