1. Product Overview
The 2 in 1 Magnetic Hand Warmer is a versatile, USB-C rechargeable device designed to provide warmth for indoor and outdoor activities. Its unique magnetic split design allows it to be used as a single unit or separated into two individual hand warmers.
2. Setup and Installation
-
Unpacking Inspection
After opening the package, carefully verify that all components of the product are complete and undamaged. If any parts are missing or damaged, please contact customer support.
-
Initial Charge
Before first use, fully charge the hand warmer using the provided USB-C charging cable. Connect the cable to the USB-C port on the device and to a compatible USB power source. The indicator lights will show charging status.
-
Assembly (Optional)
The hand warmer consists of two magnetic halves. To use as a single unit, simply bring the two halves together; they will magnetically connect. To use individually, gently pull them apart.
Figure 3: Magnetic connection and separation.
3. Operating Instructions
-
Power On/Off
Press and hold the power button (usually marked with a power symbol) for a few seconds to turn the device on or off. Indicator lights will illuminate when the device is active.
-
Adjusting Temperature Settings
The hand warmer features three adjustable temperature settings: 45°C, 55°C, and 65°C. Once powered on, short press the power button to cycle through the temperature modes. The indicator lights will change to reflect the selected temperature level.
The device quickly releases heat in approximately 3 seconds.
-
Battery Life
Enjoy up to 4-6 hours of warmth on a full charge, depending on the selected temperature setting. The indicator lights also serve as a battery level display.
Figure 4: Power button and indicator lights for operation and battery status.
4. Cleaning and Maintenance
-
Cleaning
Wipe off surface dust or stains promptly after use with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
-
Storage
When not in use, store the product in a dry, well-ventilated location, away from direct sunlight and extreme temperatures.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or device is off. | Charge the device fully. Press and hold the power button to turn on. |
| Device not heating. | Incorrect temperature setting or device is off. | Ensure the device is on and cycle through temperature settings. |
| Device not charging. | Faulty cable or power source. | Check the USB-C cable and power adapter. Try a different cable or power source. Ensure the power outlet is intact and undamaged. |
| Magnetic connection is weak. | Debris on magnetic surfaces. | Clean the magnetic surfaces of both halves. |
If troubleshooting steps do not resolve the issue, do not attempt to disassemble or repair the product yourself. Contact professional maintenance personnel or the seller for assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | 2 in 1 Magnetic Hand Warmer |
| Material | ABS |
| Dimensions (approx.) | 125mm x 115mm x 40mm (4.92in x 4.53in x 1.57in) |
| Weight (approx.) | 0.29 kg |
| Heat Preservation Duration | Up to 6 Hours (depending on setting) |
| Temperature Settings | 45°C, 55°C, 65°C |
| Charging Interface | USB-C |
| Battery Included | Yes |
| Origin | Mainland China |
7. Safety Warnings and Precautions
▲ WARNING: Read all instructions carefully before using this product. Keep this manual for future reference.
-
Do not use the product for any purpose other than its intended use. Misuse may cause injury, damage to the product, or other hazards.
-
Keep this product out of the reach of children under 3 years, unless under direct adult supervision. Small parts may cause choking hazard.
-
Do not disassemble, modify, or repair the product by yourself. Improper operation may cause electric shock, fire, or product failure. Contact professional maintenance personnel if needed.
-
Dispose of the product and its packaging in accordance with EU WEEE (Waste Electrical and Electronic Equipment) Directive 2012/19/EU and RoHS Directive 2011/65/EU. Do not discard as household waste.
-
Not suitable for children under 36 months. Contains small parts that may cause choking hazard. Use under adult supervision.
-
Do not use the product near water or in humid environments. Avoid contact with liquids to prevent electric shock. Unplug the power supply when not in use or during cleaning.
-
Prevent Dropping: Avoid dropping the product from elevated positions to prevent damage.
-
Ensure children remain clear of the operational area during use.
-
Contains substances that may cause irritation if misused. Follow the instructions strictly.
8. User Tips
-
This portable hand heater is ideal for various cold-weather activities such as camping, golfing, skiing, or simply staying warm outdoors.
-
It can be particularly beneficial for individuals with conditions like Raynaud's, arthritis, or chronically cold hands, providing soothing and consistent warmth.
-
The compact, lipstick-sized design makes each split unit easy to carry in a pocket or bag, ensuring warmth is always at hand.
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
An additional user manual in PDF format may be available for download. Please check the seller's product page or contact support for the link: User manual (PDF)
