1. Introduction
Thank you for purchasing the Edifier MR5 BT Tri-amped Powered Studio Monitor Speakers. These speakers are designed to provide high-fidelity audio reproduction for studio monitoring, multimedia, and general listening. Featuring Bluetooth V6.0, Hi-Res Audio certification, and versatile connectivity options, the MR5 BT delivers exceptional sound quality and flexibility. This manual will guide you through the setup, operation, and maintenance of your new speakers.
Figure 1: Edifier MR5 BT Speakers (White)
2. Package Contents
Please ensure all items are present in your package:
- Edifier MR5 BT Powered Studio Monitor Speakers (Pair)
- Power Cable
- Speaker Connection Cable
- Audio Cables (RCA, TRS, XLR - specific types may vary by region)
- User Manual (this document)
- Remote Control
Figure 2: Example of product packaging
3. Product Overview
The Edifier MR5 BT speakers are designed for optimal sound reproduction with a focus on clarity and accuracy. Key features include:
- Tri-amped design for precise audio separation
- Hi-Res Audio & Hi-Res Audio Wireless Gold Certificate
- 110W RMS total output power
- 101dB SPL (Peak Power, @ 1m)
- Bluetooth V6.0 for seamless wireless streaming
- Multiple connection options: Balanced XLR, Balanced TRS, RCA, AUX
- Headphone output for private listening
- Dual preset sound modes
- EDIFIER Connex App support for acoustic tuning
Figure 3: Edifier MR5 BT Key Features
Figure 4: Rear Panel Connections and Controls
4. Setup Instructions
4.1 Speaker Placement
- Place the speakers on a stable, flat surface, ideally at ear level.
- Ensure adequate space around the speakers for proper ventilation.
- For optimal stereo imaging, position the speakers equidistant from your listening position, forming an equilateral triangle.
4.2 Connecting the Speakers
- Connect the passive speaker to the active speaker using the provided speaker connection cable.
- Connect the power cable to the active speaker and then to a power outlet.
4.3 Audio Input Connections
The MR5 BT offers multiple input options:
- Balanced XLR & TRS Input: For professional-grade, low-noise connections, suitable for audio interfaces and mixers.
- RCA & AUX Input: Easily connect multiple devices such as portable audio players, mobile phones, or computers.
- Bluetooth: For wireless audio streaming.
Figure 5: Multiple Connection Options
Choose the appropriate cable for your audio source and connect it to the corresponding input on the active speaker's rear panel.
5. Operating Instructions
5.1 Powering On/Off
Locate the power switch on the active speaker's rear panel and flip it to the 'ON' position to power on the speakers. Flip to 'OFF' to power off.
5.2 Input Selection
Use the input selector on the active speaker or the remote control to switch between different audio sources (XLR, TRS, RCA, AUX, Bluetooth).
5.3 Volume Control
Adjust the master volume using the knob on the active speaker's front panel or via the remote control.
5.4 Bluetooth Connection
- Select Bluetooth input on the speakers. The Bluetooth indicator will flash.
- On your audio device (e.g., smartphone, computer), enable Bluetooth and search for 'EDIFIER MR5 BT'.
- Select 'EDIFIER MR5 BT' to pair. The indicator will turn solid blue once connected.
- The speakers support connecting two devices simultaneously, allowing easy switching between audio sources.
Figure 6: Bluetooth Automatic Connection
5.5 Headphone Output
A convenient headphone output is located on the front panel of the active speaker for private listening. Plugging in headphones will mute the speakers.
5.6 Acoustic Tuning (EDIFIER Connex App)
Download the EDIFIER Connex App to access advanced acoustic tuning features, including low cutoff frequency adjustment, slope control, and acoustic space settings. This allows you to customize the sound profile to your environment and preferences.
Figure 7: Technical Features and App Support
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or abrasive materials.
- Dust: Regularly dust the speaker grilles and vents to prevent accumulation.
- Environment: Avoid exposing the speakers to extreme temperatures, humidity, or direct sunlight.
- Power: Disconnect the power cable from the wall outlet if the speakers will not be used for an extended period.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Speakers not powered on; incorrect input selected; volume too low; audio cable disconnected. | Ensure speakers are powered on. Select the correct input source. Increase volume. Check audio cable connections. |
| Bluetooth not connecting | Speakers not in pairing mode; device too far; previously paired device connected. | Ensure speakers are in Bluetooth pairing mode. Move device closer. Disconnect from other devices or clear pairing history. |
| Distorted sound | Volume too high (source or speaker); faulty cable; audio source issue. | Reduce volume on both source and speakers. Try a different audio cable. Test with a different audio source. |
| Remote control not working | Dead batteries; obstruction; remote out of range. | Replace batteries. Remove any obstructions between remote and speakers. Ensure remote is within operating range. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | EDIFIER MR5 BT |
| Brand Name | Edifier |
| Type | Active speaker |
| Cabinet Material | Wood |
| Channels | 2 (2.0) |
| Woofer Size/Full-range Size | 1.25" |
| Number of Loudspeaker Enclosure | 2 |
| Audio Crossover | Three-Way |
| Output Power | 10-30W (PMPO: 30-50W, Energy: 100W) |
| Frequency Range | 46Hz - 40kHz |
| Impedance | 8Ω |
| Power Source | USB Power |
| Battery | NO (No battery) |
| Bluetooth Standard | V6.0 |
| Wireless Connection Method | Bluetooth |
| Connection | Wired |
| Supported Audio Codecs | FLAC |
| Support App | Yes |
| Remote Control | Yes |
| Built-in Microphone | NO |
| Voice Control | NO |
| Display Screen | NO |
| Waterproof Standard | IPX-6 |
| Sound Quality Certification | Hi-Res Audio |
| Color | White & Black |
| Origin | Mainland China |
9. User Tips
- The Edifier MR5 BT speakers are sold as a pair, ensuring a complete stereo listening experience.
- For critical listening or mixing, consider using the balanced XLR or TRS inputs for the cleanest signal path.
- Experiment with the EDIFIER Connex App's acoustic tuning features to optimize the sound for your specific room and listening preferences.
10. Warranty and Support
The Edifier MR5 BT speakers come with a 1-year warranty from the date of purchase.
For technical support, warranty claims, or any other assistance, please contact customer service:
- Contact Information: +86 18374980760
Please retain your proof of purchase for warranty service.
