1. Introduction
Thank you for purchasing the Edifier MP330 Portable Bluetooth Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker to ensure you get the best possible audio experience. The MP330 combines classic design with modern audio technology, offering powerful sound, versatile connectivity, and long-lasting battery life.
Key features include:
- 40W (RMS) total output power
- Immersive 360° Audio Experience
- Hi-Res Audio Certified (via USB-C)
- Bluetooth V6.0 with Multipoint Connection
- Bluetooth Stereo Pairing support
- USB-C and microSD (TF) Card Inputs
- Up to 19 hours of continuous playback
- Customizable Sound Effects via EDIFIER ConneX App
2. Package Contents
Please check the box for the following items:
- Edifier MP330 Portable Bluetooth Speaker x 1
- USB-C to USB-C cable x 1
- Quick start guide x 1
- Important safety instructions x 1
Figure 2.1: What's in the Box
3. Product Overview
The Edifier MP330 features intuitive controls and versatile input options. Familiarize yourself with the layout below:
Figure 3.1: Intuitive Controls and App Interface
3.1 Controls
- Power Button: Long press to power on/off.
- Bluetooth Button: Short press to switch to Bluetooth mode, long press to enter pairing mode.
- Play/Pause Button: Short press to play or pause audio.
- Volume Up/Down Buttons: Short press to adjust volume.
- Previous/Next Track Buttons: Long press to skip tracks.
3.2 Ports
Figure 3.2: USB-C and MicroSD (TF) Card Inputs
- USB-C Port (DC IN): For charging the speaker and for USB-C audio input. Input: 5V=2A.
- microSD (TF) Card Slot: For playing audio directly from a microSD card.
4. Setup
4.1 Charging the Speaker
- Connect the provided USB-C to USB-C cable to the USB-C port on the speaker.
- Connect the other end of the cable to a compatible USB power adapter (5V=2A, not included).
- The charging indicator light will show the charging status. Once fully charged, the light will change (refer to the quick start guide for specific indicator behavior).
4.2 Powering On/Off
- To Power On: Long press the Power button until the indicator light illuminates.
- To Power Off: Long press the Power button until the indicator light turns off.
5. Operating Instructions
5.1 Bluetooth Connectivity
5.1.1 Single Device Pairing
- Power on the MP330 speaker.
- Short press the Bluetooth button to switch to Bluetooth mode. The Bluetooth indicator will flash, indicating it's in pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for 'EDIFIER MP330'.
- Select 'EDIFIER MP330' to connect. The Bluetooth indicator will become solid when successfully paired.
5.1.2 Bluetooth Multipoint Connection
The MP330 supports connecting to two Bluetooth devices simultaneously.
- Pair the first device as described in Section 5.1.1.
- After the first device is connected, long press the Bluetooth button on the speaker to enter pairing mode again. The indicator will flash.
- On your second device, search for and connect to 'EDIFIER MP330'.
- The speaker will now be connected to both devices. Audio will play from the device that starts playback first.
Figure 5.1: Bluetooth Multipoint Connectivity
5.1.3 Bluetooth Stereo Pairing (TWS)
You can pair two MP330 speakers together for a true wireless stereo experience.
- Ensure both MP330 speakers are powered on and not connected to any Bluetooth devices.
- On one speaker (this will be the primary speaker), long press the Bluetooth button until it enters pairing mode.
- On the second speaker (this will be the secondary speaker), short press the Bluetooth button to enter Bluetooth mode.
- The two speakers will automatically attempt to pair with each other. Once connected, one speaker will act as the left channel and the other as the right channel.
- Now, connect your device to the primary speaker via Bluetooth as described in Section 5.1.1.
Figure 5.2: Bluetooth Stereo Pairing
5.2 USB-C Audio Playback
Connect the MP330 to your computer using the provided USB-C to USB-C cable to enjoy high-resolution audio playback.
- Connect one end of the USB-C cable to the speaker's USB-C port.
- Connect the other end to a USB-C port on your computer.
- The speaker will automatically switch to USB-C audio input mode. You may need to select the MP330 as the audio output device in your computer's sound settings.
5.3 MicroSD Card Playback
Play music directly from a microSD card without needing a connected device.
- Insert a microSD card (pre-loaded with audio files) into the microSD card slot on the speaker.
- The speaker will automatically detect the card and begin playback.
- Use the Play/Pause and Track Skip buttons to control playback.
5.4 Customizable Sound Effects
The MP330 offers five preset sound effects and allows for custom equalization via the EDIFIER ConneX App.
Figure 5.3: Customizable Sound Effects
- Preset Modes: Music, Party, Vocal, Movie, Game. These can be switched through the speaker's buttons (refer to the quick start guide for specific button combinations).
- Customized Mode: Use the EDIFIER ConneX App to fine-tune your audio preferences.
5.5 EDIFIER ConneX App Control
Enhance your experience by downloading the EDIFIER ConneX mobile app.
Figure 5.4: EDIFIER ConneX App
The app allows for:
- Source switching
- Playback control
- Sound effect customization (including custom EQ)
- Access to the user manual and other settings
Scan the QR code in Figure 5.4 or search for 'EDIFIER ConneX' in your device's app store.
5.6 Product Demonstration Video
Video 5.1: Edifier MP330 Product Features Overview
6. Maintenance
6.1 Cleaning
- Wipe the speaker with a soft, dry cloth.
- Do not use liquid cleaners or aerosol sprays.
- Avoid getting moisture into any openings.
6.2 Storage
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery periodically to maintain its health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Battery is depleted | Charge the speaker using the USB-C cable. |
| Cannot pair via Bluetooth | Speaker is not in pairing mode or already connected to another device | Long press the Bluetooth button to enter pairing mode. Ensure other devices are disconnected. |
| No sound | Volume is too low, incorrect input source, or device not playing | Increase volume on both speaker and source device. Check input source. Ensure audio is playing on the source device. |
| Poor sound quality | Bluetooth interference, low battery, or source audio quality | Move closer to the speaker, charge the battery, try a different audio source or file. |
8. Specifications
Detailed technical specifications for the Edifier MP330 speaker:
Figure 8.1: Edifier MP330 Specifications
| Feature | Detail |
|---|---|
| Total Output Power (RMS) | 11W (treble) + 11W (treble) + 18W (mid-bass) |
| Driver Units | Treble: 0.75-inch, Mid-bass: 53mm × 93mm, Passive bass radiator: 47mm × 109mm |
| Frequency Response | 53Hz - 40kHz |
| Signal-to-Noise Ratio | ≥ 85dB (A) |
| Audio Inputs | Bluetooth, USB-C, and microSD (TF) Card |
| Bluetooth Version | V6.0 |
| Codecs | SBC |
| Input Sensitivity | Bluetooth: 500 ± 50mFFS, USB-C: 500 ± 50mFFS |
| Dimensions (W × H × D) | 207mm × 101mm × 116mm (Handle height excluded), 207mm × 143mm × 116mm (Handle height included) |
| Net Weight | 1.13kg |
| Battery Capacity | 4800 mAh |
| Number of Loudspeaker Enclosure | 1 |
| Channels | 3 (2.1) |
| Power Source | Battery |
| Support APP | Yes |
| Built-in Microphone | Yes |
| Support Memory Card | Yes |
| Control Type | phase, Playback, Volume control, EQ |
| Certification | CE, FCC, RoHS |
9. User Tips
- For the most comprehensive control and customization of sound effects, download and utilize the EDIFIER ConneX mobile application.
- When using the speaker outdoors, ensure it is placed on a stable surface to prevent accidental falls.
10. Warranty and Support
Edifier products are designed with quality and performance in mind. For warranty information and technical support, please refer to the official Edifier website or contact your local distributor. Keep your purchase receipt as proof of purchase.
