intelamp YL005-10EP

Contents

Intelamp Solar LED Motion Sensor Wall Light

Model: YL005-10EP

Introduction

Thank you for choosing the Intelamp Solar LED Motion Sensor Wall Light. This product is designed to provide efficient and reliable outdoor lighting using solar energy, featuring a long-range motion sensor and multiple lighting modes. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Intelamp Solar LED Motion Sensor Wall Light with solar panel and remote control

Figure 1: Intelamp Solar LED Motion Sensor Wall Light components.

Specifications

FeatureSpecification
ModelYL005-10EP
Solar Panel5V/2400mA (12W), 22.5% conversion rate
Battery12000mAh (Electric Vehicle-grade Lithium Battery)
Brightness3000 Lumens
Working TimeFully charged in 5 hours of direct sunlight; provides 4 hours of high light sensing or 36 hours of low light.
Motion Sensor Range8 meters (sensor head), 30 meters (linked lights), 25 meters (sensor box extended)
Protection LevelIP65 (Waterproof)
Light SourceLED bulbs
DimmableYes
Body MaterialABS
Warranty2 Years
Table showing key specifications of the solar light including solar panel, battery, working time, and brightness.

Figure 2: Detailed specifications of the solar light.

Diagram showing dimensions of the solar light, solar panel, and remote control.

Figure 3: Product dimensions and components.

Setup and Installation

1. Initial Charging

Before first use, ensure the solar panel is exposed to direct sunlight for at least 5 hours to fully charge the 12000mAh battery. This will ensure optimal performance and lighting duration.

2. Choosing an Installation Location

Select a location where the solar panel can receive maximum direct sunlight throughout the day, free from obstructions like trees or buildings. The light itself should be positioned to cover the desired area for motion sensing and illumination.

3. Installation Methods

The solar panel and lamp can be installed securely using the provided mounting accessories. The light head offers 120° adjustability for precise aiming.

  • Method 1: Wall Mounting: Use screws to securely attach the light and solar panel to a wall.
  • Method 2: Post Mounting: Use tie-wraps (not included) to secure the light and solar panel to round or square posts.
Diagram showing two installation methods: wall mounting and post mounting, with 120 degree light head adjustment.

Figure 4: Installation methods and light head adjustability.

Operating Instructions

1. Automatic Day/Night Operation

The solar light is designed to automatically detect ambient light. It will not illuminate during the daytime to conserve energy and will activate its selected lighting mode only when it gets dark.

2. Motion Sensor Functionality

The light features a long-range motion sensor system:

  • Primary Sensor: The sensor head on each light detects motion within 8 meters (approximately 26 feet).
  • Linked Lights: When motion is detected by one light's sensor head, it transmits a signal to other lights in its adjacent 30-meter (approximately 100 feet) position to also turn on.
  • Extended Sensing Range: An optional sensor box (if installed at a gate, for example) can extend the sensing range up to 25 meters (approximately 82 feet), triggering the main light from a greater distance.
Diagram illustrating the intelligent motion sensor with an 8-meter detection range and 30-meter linked light activation.

Figure 5: Intelligent Motion Sensor operation.

Diagram showing the sensor box extending the sensing range up to 25 meters.

Figure 6: Extended sensing range with sensor box.

3. Lighting Modes and Remote Control

The included remote control allows you to select from four distinct lighting modes and adjust settings:

  • Mode 1: Dim Light Sensor Mode: The light turns on strong when motion is detected, then dims after people leave (delay options: 30s, 3min, 10min).
  • Mode 2: Strong Light Sensor Mode: The light turns on strong when motion is detected and turns off completely after people leave.
  • Mode 3/4: Strong Long Light Mode: The light stays on for a lasting duration (2-12 hours) in darkness or at night, then automatically switches to dim or off after the set time.
  • Brightness Adjustment: Use the remote to set brightness levels (e.g., 60%, 80%, 100%).
  • Constant-On Mode: Select the non-sensing constant-on mode for continuous illumination.
  • On/Off: Manually turn the light on or off.
Diagram illustrating the four lighting modes and remote control functions.

Figure 7: Available lighting modes and remote control options.

Video 1: Product demonstration showcasing components, motion sensing, and lighting in action.

Maintenance

1. Cleaning the Solar Panel

Regularly clean the surface of the solar panel to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient charging. Use a soft, damp cloth; avoid abrasive cleaners.

2. Battery Care

The integrated 12000mAh electric vehicle-grade battery is designed for long service life. To maintain battery health, ensure the light receives adequate sunlight for charging, especially after prolonged periods of cloudy weather or heavy use.

3. Waterproofing

The light has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets from any direction. It is designed to withstand various outdoor weather conditions, including rain. However, avoid submerging the unit in water.

IP65 Waterproof Lights shown operating effectively in rainy conditions.

Figure 8: The light's IP65 waterproof capability.

Troubleshooting

  • Light does not turn on at night:
    • Ensure the solar panel is clean and receiving direct sunlight for at least 5 hours daily.
    • Verify that the light is switched ON via the remote control.
  • Light is dim or lighting duration is short:
    • The battery may not be fully charged. Ensure the solar panel is in an optimal position for maximum sun exposure.
    • Check for any obstructions blocking sunlight to the solar panel.
    • Cold weather can affect battery performance; this is normal.
  • Motion sensor not detecting:
    • Ensure the sensor head is not obstructed.
    • Check the remote control settings to ensure the motion sensor mode is active.
  • Remote control not working:
    • Check the battery in the remote control and replace if necessary.
    • Ensure there are no obstructions between the remote and the light's receiver.

User Tips

  • For best performance, mount the solar panel facing south (in the Northern Hemisphere) or north (in the Southern Hemisphere) at an angle that maximizes direct sunlight exposure throughout the day.
  • Consider using the 'Dim Light Sensor Mode' for general security lighting, as it conserves battery life while still providing bright illumination upon detection.
  • If using multiple linked lights, ensure they are within the 30-meter communication range for effective synchronized activation.

Warranty and Support

This Intelamp Solar LED Motion Sensor Wall Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the Intelamp customer service department. Contact details can typically be found on the product packaging or the seller's official website.

© 2024 Intelamp. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.