Ottocast Motorcycle Smart Display User Manual

1. Product Overview

The Ottocast Motorcycle Smart Display is a versatile device designed to enhance your riding experience with smart connectivity and safety features. It offers wireless CarPlay and Android Auto, GPS navigation, and optional DVR and tire pressure monitoring (TPMS) capabilities, all housed in a rugged, waterproof design.

Key Features:

• Wireless CarPlay & Android Auto: Seamlessly integrate your smartphone for navigation, music, calls, and messages.
• High-Resolution IPS Touchscreen: Available in 5-inch (no DVR) or 6-inch (with front and rear cameras and DVR) options, featuring a glove-friendly, sunlight-readable display.
• IP67 Waterproof: Designed to withstand rain and dust, ensuring durability in various weather conditions.
• Dual Bluetooth 5.0: Connect your phone to the display and then to your Bluetooth helmet or earphones for hands-free control.
• Optional DVR & TPMS: Enhance safety with front and rear recording cameras (6-inch model) and real-time tire pressure monitoring (optional).
• Anti-Theft Detachable Screen: Quick-release mount for easy removal and security when parked.

2. Package Contents

Please check the contents of your package upon arrival. The exact items may vary slightly depending on the model (5-inch or 6-inch with DVR) purchased.

Typical Contents:

• Intelligent Display Screen (5-inch or 6-inch)
• Mounting Bracket
• Power Line
• Product Manual
• Setup Toolkit (Allen keys, wrench)
• Cameras (Front and Rear, for 6-inch model only)
• TPMS Sensors (Optional)

3. Setup and Installation

This section provides a general guide for installing your Ottocast Motorcycle Smart Display. For a visual demonstration, please refer to the installation video below.

Wiring Diagram:

Step-by-Step Installation:

1. Power Connection:
   • Locate your motorcycle's 12-volt battery.
   • Connect the black negative electrode cable of the power supply to the negative terminal of the 12-volt battery. Tighten securely.
   • Find the fuse box inside the motorcycle. Identify and remove the ACC fuse (activated by the key).
   • Screw the red wire of the power supply onto the ACC fuse.
   • Plug the fuse back into the fuse box and cover it well.
2. Rear Camera Installation (6-inch model only):
   • Remove the rear view camera and its extension cable.
   • Fix the rear camera in a suitable position at the rear of the motorcycle using the provided 3M adhesive.
   • Connect the rear camera with its extension cable.
   • Route the cable according to the appropriate position on your motorcycle, ensuring it is securely fixed in place.
3. Front Camera Installation (6-inch model only):
   • Remove the front-looking camera.
   • Fix the front camera in the right position at the front of the motorcycle using the provided 3M adhesive.
   • Route the cable according to the appropriate position on your motorcycle, leaving enough room for steering.
   • Connect the front view line of the host and the front view camera line.
4. Mounting Bracket Installation:
   • Remove the fixing bracket and installation kit.
   • Choose the appropriate buckle gasket according to your handlebar size.
   • Attach the brackets to the handlebars and tighten the screws.
   • Remove the fixing hose screw again.
5. Display Unit Installation:
   • Remove the main frame mounting card from the bracket.
   • Mount the display unit onto the bracket, ensuring the holes align.
   • Fix it with screws and then tighten it with a tool.
6. Final Connections:
   • Connect the power cord and camera extension cables (if applicable) to the main display unit.
   • Secure all wires in appropriate positions to prevent interference with moving parts.
7. Restore Motorcycle Parts:
   • After all wires are connected, restore the motorcycle seat plate and side baffle to their original positions.
8. Power On:
   • Start the motorcycle with the key. The display should power on successfully, indicating the installation is complete.

4. Operating Instructions

The Ottocast Smart Display runs on a Linux operating system and offers intuitive touch controls. Its high-resolution IPS panel ensures clear visibility.

4.1 Wireless CarPlay & Android Auto

Connect your smartphone wirelessly to the display for a seamless integration of your favorite apps.

• Compatibility: iPhone with iOS 10.0 and above, Android phones with Android 11.0 and above.
• Connection: Pair your phone via Bluetooth and Wi-Fi to enable CarPlay or Android Auto.
• Features: Access navigation (Google Maps, Waze), music, make calls, and send messages. Use voice control (Siri/Google Assistant) for safer operation while riding.

4.2 GPS Navigation

Utilize your preferred navigation apps directly on the display for clear, turn-by-turn directions.

4.3 DVR (Drive Recorder) - 6-inch model only

The 6-inch model includes front and rear cameras for recording your rides in 1080P quality with a 140° wide-angle view.

• Recording: Automatically records footage from both front and rear cameras.
• Split Screen Display: View navigation and camera feeds simultaneously on a split screen.
• Storage: Footage is stored on a TF card (standard 64GB, expandable up to 128GB).

4.4 Tire Pressure Monitoring System (TPMS) - Optional

If equipped with optional TPMS sensors, the display can show real-time tire pressure and temperature.

• Monitoring: Continuously displays front and rear wheel pressure and temperature.
• Safety: Helps ensure optimal tire conditions for a safer ride.

4.5 Bluetooth Helmet Connectivity

Connect your Bluetooth-enabled helmet or earphones for audio output and hands-free communication.

• Audio: Listen to music, navigation prompts, and calls through your helmet.
• Controls: Control volume, skip tracks, and manage calls directly from the display or connected helmet controls.

5. Maintenance

To ensure the longevity and optimal performance of your Ottocast Motorcycle Smart Display, follow these maintenance guidelines:

• Cleaning: Use a soft, damp cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the display or casing.
• Water Exposure: While the device is IP67 waterproof, prolonged submersion is not recommended. Ensure all ports and covers are securely closed before exposure to water.
• Temperature: Operate and store the device within its specified temperature range (-20°C to +80°C) to prevent damage.
• Storage: When not in use for extended periods, store the device in a cool, dry place. Consider detaching the screen to prevent theft and protect it from extreme conditions.
• Cable Management: Periodically check all cables for wear and tear. Ensure they are securely routed and not pinched or exposed to excessive friction.

6. Troubleshooting

If you encounter issues with your Ottocast Smart Display, please refer to the following common troubleshooting steps:

• Device Not Powering On:
  • Check all power connections to ensure they are secure and correctly wired to the motorcycle battery and ACC fuse.
  • Verify that the motorcycle battery has sufficient charge.
  • Inspect the fuse for any signs of damage or being blown. Replace if necessary.
• CarPlay/Android Auto Not Connecting:
  • Ensure your smartphone's Bluetooth and Wi-Fi are enabled.
  • Forget the device from your phone's Bluetooth settings and re-pair.
  • Restart both your phone and the Ottocast display.
  • Confirm your phone's operating system meets the minimum requirements (iOS 10.0+, Android 11.0+).
• Poor Camera Quality/No Image (6-inch model only):
  • Check camera cable connections to the main unit.
  • Ensure camera lenses are clean and free from dirt or obstructions.
  • Verify the TF card is correctly inserted and not full.
• Touchscreen Unresponsive:
  • Ensure the screen is clean and dry.
  • Restart the device.
• GPS Signal Issues:
  • Ensure the device has a clear line of sight to the sky.
  • Move away from tall buildings or dense foliage that might obstruct the signal.

7. Specifications

8. User Tips

• Cable Routing: When routing cables, always ensure they are clear of moving parts (like the handlebars or suspension) and secured to prevent snagging or damage. Leave enough slack for full steering lock.
• Screen Visibility: The display is designed for sunlight readability. Adjust brightness settings as needed for optimal viewing in different lighting conditions.
• Detachable Screen: Take advantage of the quick-release mount to easily remove the display when parking your motorcycle in public areas, enhancing security.
• Firmware Updates: Periodically check the manufacturer's website for any available firmware updates to ensure you have the latest features and performance improvements.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Ottocast website or contact your retailer. Keep your purchase receipt as proof of purchase.