1. Product Overview
This manual provides essential information for the safe and efficient use of your French Green Chandelier Magic Beans Molecule Lamp. Please read it thoroughly before installation and operation.
2. Safety Instructions
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- Installation should be performed by a qualified electrician to prevent electric shock or fire hazards.
- Do not exceed the specified voltage range (110-240V).
- Use only E27 base LED bulbs as specified. Bulbs are not included with the lamp.
- Keep the lamp away from water and moisture.
- Do not attempt to modify the lamp's structure or wiring.
3. Setup and Installation
The Magic Beans Molecule Lamp features a semiflush mount and is designed for self-contained installation. Professional installation is recommended.
3.1 Components Check
Before beginning installation, verify that all components are present and undamaged:
- Lamp body (iron frame)
- Glass lampshades
- Mounting hardware (screws, anchors, etc.)
- Wiring connectors
3.2 Installation Steps
- Turn off Power: Locate the circuit breaker for the installation area and turn off the power.
- Prepare Mounting Surface: Mark the drilling points on the ceiling according to the lamp's mounting bracket. Ensure the surface can support the lamp's weight.
- Install Mounting Bracket: Secure the mounting bracket to the ceiling using appropriate screws and anchors.
- Wire Connections: Connect the lamp's wires to the household electrical wires (live, neutral, ground) according to local electrical codes. Ensure all connections are secure.
- Attach Lamp Body: Carefully lift the lamp body and attach it to the mounting bracket, securing it with the provided fasteners.
- Install Bulbs: Screw E27 LED bulbs (not included) into the lamp sockets.
- Attach Lampshades: Securely attach the glass lampshades to the lamp body.
- Restore Power: Turn the power back on at the circuit breaker.
4. Operating Instructions
The Magic Beans Molecule Lamp is operated via a Touch On/Off Switch, typically connected to your wall switch.
4.1 Turning On/Off
- Ensure the lamp is correctly installed and connected to a power source.
- Use the wall switch to turn the lamp on or off.
4.2 Light Effects
Depending on the bulbs installed and the specific model, the lamp may offer different emitting colors such as warm light, cold light, or 3-colors (adjustable via repeated toggling of the switch).
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
5.1 Cleaning
- Always disconnect power before cleaning.
- Wipe the iron lamp body and glass lampshades with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or materials.
- Ensure all parts are completely dry before restoring power.
5.2 Bulb Replacement
- Disconnect power before replacing bulbs.
- Allow old bulbs to cool completely before handling.
- Unscrew the old E27 bulb and screw in a new E27 LED bulb.
- Do not overtighten bulbs.
6. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
- Lamp does not light up:
- Check if the power supply is connected and the wall switch is on.
- Ensure bulbs are correctly installed and not faulty.
- Verify electrical connections are secure.
- Flickering lights:
- Check for loose bulb connections.
- Ensure the voltage supply is stable and within the specified range.
- Replace faulty bulbs.
- Inconsistent light color (for 3-color models):
- Ensure all bulbs are of the same type and compatible with the 3-color switching mechanism.
- Toggle the wall switch quickly to cycle through the color modes.
For persistent issues, contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | HomeLover |
| Model Number | Molecule Lamp |
| Item Type | Chandeliers |
| Installation Type | Semiflush Mount, self-contained |
| Power Source | AC |
| Voltage | 110-240V, 90-260V, 240V, 220V |
| Light Source | LED bulbs |
| Base Type | E27 |
| Is Bulbs Included | No |
| Is Dimmable | No |
| Switch Type | Touch On/Off Switch (via wall switch) |
| Body Material | Glass |
| Shade Type | Frosted Glass |
| Shade Direction | Up & Down |
| Finish | IRON |
| Style | ART DECO |
| Luminous Flux | 2000-82000 (depending on bulbs) |
| Applicable Area | 10-20㎡ |
| Color | Green + White |
| Certification | CE, CCC, ROHS |
| Origin | Mainland China |
| Is Smart Device | No |
7.1 Certifications
The product complies with various international standards:
- CE LVD: View Certificate
- CE EMC: View Certificate
- CE RoHS: View Certificate
- FCC: View Certificate
8. User Tips
While specific user tips from reviews or Q&A are not available, general advice for this type of lighting fixture includes:
- Consider the room size and ceiling height when choosing the number of heads for optimal illumination and aesthetic balance.
- For models with 3-color changing functionality, a quick flick of the wall switch usually cycles between warm, cold, and natural light.
- When installing, ensure the wiring is neatly tucked away for a clean, professional look, especially with semiflush mount designs.
9. Warranty and Support
9.1 Warranty Information
This product comes with a 6-year warranty. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 Customer Support
If you have any questions, require technical assistance, or need to claim warranty service, please contact the seller or retailer from whom you purchased the product. Provide your purchase details and a clear description of the issue for prompt support.