ANDELI MONER-CP

Contents

ANDELI Auto-Darkening Welding Helmet with LED Light User Manual

Model: MONER-CP | Brand: ANDELI

Introduction

Thank you for choosing the ANDELI MONER-CP Auto-Darkening Welding Helmet. This helmet is designed to provide superior protection and enhanced visibility for various welding, cutting, and grinding applications. Featuring a panoramic true-color viewing screen, integrated LED lights, and advanced auto-darkening technology, it ensures safety and comfort for professional and hobbyist welders alike. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Safety Information

WARNING: Welding, cutting, and grinding processes can be hazardous and may cause serious injury or death. Always follow all applicable safety precautions and guidelines.

  • Always wear appropriate personal protective equipment (PPE) in addition to this welding helmet, including safety glasses, gloves, and protective clothing.
  • Ensure the helmet is properly adjusted and fits securely before beginning any work.
  • Inspect the helmet and lenses for any damage before each use. Replace damaged parts immediately.
  • Do not use the helmet if the auto-darkening function is not working correctly.
  • Avoid direct exposure to welding arc or bright light without proper eye protection.
  • Keep the helmet clean and free from debris to ensure optimal performance and visibility.
  • This helmet provides UV/IR protection up to DIN16, but it is not suitable for laser welding or oxy-acetylene welding/cutting applications.

Package Contents

Verify that all items are present in your package:

  • 1 x ANDELI Welding Helmet
  • 1 x External Protective Lens
  • 1 x Internal Protective Lens
  • 2 x Replaceable Lithium Batteries (built-in)
  • 1 x Pouch Bag
  • 1 x User Manual (this document)
ANDELI Welding Helmet and included accessories: helmet, external lens, internal lens, two batteries, and a pouch bag.
Figure 1: Package Contents

Specifications

FeatureSpecification
Brand NameANDELI
Model NumberMONER-CP
View Area3.94" x 3.74" (100mm x 95mm)
Switch Time1/25000s
Auto-DarkeningYes (4 Premium Arc Sensors)
Solar PoweredYes
Power SupplyBattery (2x Replaceable Lithium Batteries, built-in)
Helmet MaterialPP
Optic Class1/1/1/2
UV/IR ProtectionDIN16
Operating ModesGrind (DIN 4), Cut (DIN 5-9), Weld (DIN 9-13)
LED Light OutputUp to 400 Lumens (2 adjustable levels)
LED Charging InterfaceType-C (charging cable not included)
CertificationCE
Close-up of the welding helmet's viewing screen showing 3.94 by 3.74 inch dimensions, low battery indicator, and certifications like ANSI Z87.1-2010 and CE.
Figure 2: Panoramic Viewing Screen and Certifications

Setup

1. Headgear Adjustment

Proper adjustment of the headgear is crucial for comfort and safety. Adjust the headgear to ensure the helmet sits securely and comfortably on your head, and the viewing screen is at the correct distance from your eyes.

  • Adjustable Top Strap: Loosen the strap and adjust its length to fit the top of your head.
  • Distance Adjustment: Adjust the knobs on the sides to control the distance between the helmet and your face.
  • Angle Adjustment: Use the side knobs to set the viewing angle of the helmet.
  • Tightness Adjustment: Rotate the rear knob to tighten or loosen the headband for a snug fit.
Diagram showing the adjustable components of the welding helmet headgear: adjustable top strap, distance adjustment, angle adjustment, and tightness adjustment.
Figure 3: Headgear Adjustment Points

2. Protective Lens Installation

Ensure the external and internal protective lenses are clean and free from scratches. Replace them if damaged to maintain optical clarity and protection.

  • Carefully remove any existing protective films from new lenses.
  • Insert the external protective lens into the designated slot on the front of the helmet.
  • Insert the internal protective lens into the designated slot behind the auto-darkening filter.

3. Battery Check and Charging

The helmet is powered by built-in replaceable lithium batteries and solar power. The LED lights are powered by a separate rechargeable battery.

  • The auto-darkening filter uses solar power and two built-in replaceable lithium batteries. Ensure these batteries are functional. A low battery indicator may be present on the viewing screen (refer to Figure 2).
  • For the LED lights, charge the integrated battery using a Type-C charging cable (not included). A full charge takes approximately 3.5 hours.
Image showing a Type-C charging cable connected to the helmet's LED light control unit, indicating 'More Convenient Charging' and a 3.5-hour charge time.
Figure 4: Type-C Charging for LED Lights

Operating Instructions

1. Powering On/Off and Auto-Darkening Function

  • The auto-darkening filter is typically always on and ready for use, powered by solar cells and batteries.
  • The helmet features 4 premium arc sensors for fast auto-darkening within 1/25000s when an arc is detected.
  • Before welding, perform a quick test by briefly exposing the sensors to a bright light source (not the welding arc itself) to ensure the lens darkens.
Close-up of the auto-darkening filter showing 4 arc sensors and a fast switch time of 1/25000s for quick darkening.
Figure 5: Auto-Darkening Sensors

2. Mode and Shade Level Selection

Use the control knob on the side of the helmet to select the appropriate mode and adjust the shade level, sensitivity, and delay.

  • Grind Mode (DIN 4): For grinding operations. The auto-darkening function is deactivated, and the lens remains at a light shade (DIN 4) for clear visibility.
  • Cut Mode (DIN 5-9): For cutting applications. Adjust the shade level within this range based on the intensity of the cutting arc.
  • Weld Mode (DIN 9-13): For various welding processes. Adjust the shade level within this range according to the welding current and material.
  • Sensitivity: Adjust the sensitivity knob to control how easily the sensors detect the welding arc. Higher sensitivity means the lens will darken with less intense light.
  • Delay: Adjust the delay knob to control how long the lens remains darkened after the arc stops. A longer delay is useful for high-amperage welding or tack welding to prevent eye fatigue.
Diagram illustrating the three adjustable modes: Grind Mode (DIN 4), Cut Mode (DIN 5-9), and Weld Mode (DIN 9-13), with a control knob for settings.
Figure 6: Operating Modes and Control Knob

3. LED Light Operation

The integrated LED lights provide illumination for your workspace. They can be controlled via a remote unit.

  • Motion Sensor Light Function:
    1. First, turn on the power switch on the remote unit.
    2. Turn on the motion sensor switch again.
    3. When your hand approaches the sensor (within 5cm), the LED light will automatically turn off.
    4. When your hand moves away, the LED light will automatically turn on.
    5. Note: Rapid hand motion may not trigger the sensors.
  • Manual Light Switch:
    1. Press the light switch button to turn the lights on.
    2. Click continuously to switch between high and low brightness levels.
  • Important: When the LED is turned on in a strong light environment, or if the ADF (Auto-Darkening Filter) may mistakenly trigger, it is recommended to reduce the sensitivity to a position below 5.
Diagram of the LED light control unit showing a motion sensor switch and a light switch, with descriptions for motion sensor function and two levels of adjustable brightness.
Figure 7: LED Light Control Unit
A welder wearing the ANDELI helmet with LED lights illuminating the workspace, demonstrating the 'Illuminate Your Whole Workspace' feature with 2 premium LED sidelights up to 400 lumens and 2 adjustable brightness levels.
Figure 8: Helmet with LED Lights in Use

Maintenance

1. Cleaning

  • Helmet Shell: Clean the helmet shell with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners.
  • Protective Lenses: Clean the external and internal protective lenses with a soft, lint-free cloth and a specialized lens cleaning solution. Do not use abrasive materials that could scratch the surface.
  • Auto-Darkening Filter: Gently wipe the auto-darkening filter with a soft, dry cloth. Do not immerse the filter in water or cleaning solutions.

2. Battery Replacement (Auto-Darkening Filter)

The auto-darkening filter uses two replaceable lithium batteries. When the low battery indicator appears (Figure 2), replace both batteries simultaneously.

  • Locate the battery compartment on the auto-darkening filter.
  • Carefully open the compartment and remove the old batteries.
  • Insert new, identical lithium batteries, ensuring correct polarity.
  • Close the battery compartment securely.

3. LED Light Charging

Recharge the LED light battery as needed using a Type-C cable. A full charge takes approximately 3.5 hours.

4. Storage

  • Store the helmet in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Use the provided pouch bag to protect the helmet from dust and scratches during storage.
  • Ensure the helmet is clean before storing.

Troubleshooting

ProblemPossible CauseSolution
Lens does not darken when welding.
  • Low battery.
  • Sensors are dirty or obstructed.
  • Sensitivity setting is too low.
  • Helmet not positioned correctly.
  • Incorrect mode selected (e.g., Grind mode).
  • Replace batteries.
  • Clean sensors.
  • Increase sensitivity.
  • Reposition helmet to ensure sensors face the arc.
  • Select Weld or Cut mode.
Poor visibility through the lens.
  • Protective lenses are dirty or scratched.
  • Auto-darkening filter is damaged.
  • Clean or replace protective lenses.
  • Contact support for filter replacement.
LED lights not working.
  • LED battery is discharged.
  • LED light unit is off or faulty.
  • Charge the LED light battery via Type-C.
  • Ensure the power and light switches are on.
Lens flickers or remains dark after arc stops.
  • Delay setting is too long (remains dark).
  • Sensitivity too high (flickers).
  • Interference from other light sources.
  • Adjust delay to a shorter time.
  • Reduce sensitivity.
  • Minimize other light sources or adjust sensitivity.

User Tips

  • Pre-Weld Check: Always perform a quick "flash test" with a non-welding light source (like a flashlight) to ensure the auto-darkening function is working before starting any welding task.
  • Optimal Headgear Fit: Take the time to fine-tune all headgear adjustments. A well-fitted helmet reduces neck strain and ensures consistent sensor performance.
  • LED Light Usage: Utilize the LED lights in dimly lit environments to improve visibility of your workpiece before striking an arc. Remember to adjust sensitivity if the LEDs cause false darkening.
  • Lens Protection: Keep spare external and internal protective lenses on hand. They are consumable parts and should be replaced regularly to maintain clear vision and protect the auto-darkening filter.
  • Battery Management: While the main filter is solar-powered, the replaceable lithium batteries are crucial. Keep an eye on the low battery indicator and replace them promptly to avoid unexpected darkening failures.

Warranty and Support

ANDELI products are manufactured to high-quality standards. For any issues or questions regarding your welding helmet, please contact your retailer or the ANDELI customer support team. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, please refer to the contact information provided by your point of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.