PUSR USR-ISF1005, USR-ISF1008

Contents

Industrial Ethernet Switch User Manual

Models: USR-ISF1005, USR-ISF1008

Brand: PUSR

1. Introduction

The PUSR USR-ISF series industrial Ethernet switches are unmanaged, robust networking devices designed for harsh industrial environments. Featuring IP40 protection, a wide operating temperature range, and redundant power inputs, these switches ensure reliable data transmission in demanding applications. This manual provides essential information for the proper installation, operation, and maintenance of your industrial Ethernet switch.

USR-ISF1005 Industrial Ethernet Switch angled view

Figure 1: USR-ISF1005 Industrial Ethernet Switch

2. Safety Information

Please read and follow these safety precautions to prevent damage to the device and ensure personal safety:

  • Ensure the power supply voltage is within the specified range (DC 9.6-60V).
  • Disconnect power before performing any installation or maintenance.
  • Do not operate the device in environments exceeding its specified temperature and humidity limits.
  • Ensure proper grounding of the device to prevent electrical hazards.
  • Avoid exposing the device to water or excessive moisture.
  • Only qualified personnel should install and service this equipment.

3. Package Contents

Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor.

  • Industrial Ethernet Switch (USR-ISF1005 or USR-ISF1008)
  • DIN-Rail mounting kit
  • Terminal block for power connection
  • Quick Start Guide (if included)

Note: Power supply is typically not included and must be purchased separately.

4. Product Overview

The USR-ISF series switches feature a robust aluminum housing for effective cooling and IP40 protection against dust. They are designed for DIN-rail mounting, making installation convenient in industrial cabinets.

Front view of USR-ISF1005 industrial switch

Figure 2: USR-ISF1005 Front Panel Layout

4.1. Physical Features

  • Ethernet Ports: 5 (USR-ISF1005) or 8 (USR-ISF1008) 10/100Mbps RJ45 ports.
  • Power Input: Dual redundant DC power inputs (PWR1, PWR2) via a removable terminal block.
  • Grounding Screw: For chassis grounding.
  • LED Indicators:
    • PWR: Power indicator (Green: Power ON).
    • Link/Act (per port): Green for 100Mbps link/activity, Yellow for 10Mbps link/activity.
  • Housing: Aluminum alloy, fanless design.

5. Setup

5.1. Mounting the Switch

The USR-ISF series switches are designed for DIN-rail mounting.

  1. Attach the DIN-rail clip to the rear of the switch using the provided screws.
  2. Hook the top edge of the DIN-rail clip over the top of the DIN-rail.
  3. Push the bottom of the switch towards the DIN-rail until it snaps into place.
  4. Ensure the switch is securely fastened to the DIN-rail.
Industrial switch showing aluminum housing and DIN-rail mounting

Figure 3: DIN-Rail Mounting

5.2. Power Connection

The switch supports redundant power inputs (PWR1 and PWR2) for enhanced reliability. Use a DC power supply within the 9.6-60V range.

  1. Ensure the power supply is turned off.
  2. Connect the positive (+) and negative (-) wires from your DC power supply to the corresponding terminals on the removable terminal block for PWR1.
  3. (Optional) For redundancy, connect a second DC power supply to the PWR2 terminals.
  4. Insert the terminal block firmly into the power input socket on the switch.
  5. Connect the grounding wire from your installation to the grounding screw on the switch chassis.
  6. Turn on the power supply. The PWR LED on the switch should illuminate green.
Close-up of redundant power supply terminal block with wiring

Figure 4: Power Terminal Block Wiring

5.3. Network Connection

Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., PCs, PLCs, IP cameras) to the RJ45 ports on the switch. The switch supports auto-MDI/MDIX, so straight-through or crossover cables can be used interchangeably.

  1. Connect one end of an Ethernet cable to your network device.
  2. Connect the other end of the Ethernet cable to any of the RJ45 ports (1-5 or 1-8) on the switch.
  3. Verify the Link/Act LED for the connected port illuminates, indicating a valid link. It will blink to show data activity.

6. Operating Instructions

The USR-ISF series are unmanaged switches, offering plug-and-play operation. No configuration is required.

  • Once powered on and network cables are connected, the switch will automatically detect the speed and duplex mode of connected devices and establish communication.
  • The Link/Act LEDs provide visual feedback on network status. A solid green or yellow light indicates a successful link, and blinking indicates data transmission.
  • Ensure all connected devices are properly configured for network communication (e.g., IP addresses, subnet masks).

7. Maintenance

Regular maintenance helps ensure the longevity and reliable operation of your industrial Ethernet switch.

  • Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
  • Environmental Check: Regularly inspect the operating environment to ensure it remains within specified temperature and humidity ranges.
  • Cable Inspection: Check Ethernet and power cables for any signs of damage or loose connections.
  • Firmware: As an unmanaged switch, firmware updates are generally not applicable or required.

8. Troubleshooting

ProblemPossible CauseSolution
Switch does not power on (PWR LED off)No power from supply; incorrect wiring; faulty power supply.Check power supply connection and voltage; verify wiring polarity; test power supply.
No Link/Act LED for a connected portFaulty Ethernet cable; device not powered on; incorrect network settings on device; port fault.Replace Ethernet cable; ensure connected device is powered on; check device's network configuration; try another port.
Network performance issuesExcessive network traffic; faulty cable; device issues.Check network utilization; replace cables; troubleshoot connected devices.

9. Specifications

The following table provides detailed specifications for the USR-ISF series and other related models in the PUSR industrial switch lineup.

Model ordering guide table with specifications for PUSR industrial switches

Figure 5: PUSR Industrial Switch Model Specifications

FeatureUSR-ISF1005USR-ISF1008
100M Copper Ports58
Gigabit Copper Ports----
Gigabit SFP Slot----
PoE----
Managed/UnmanagedUnmanagedUnmanaged
Power SupplyDC 9.6-60VDC 9.6-60V
Operating Temperature-40℃ ~ +85℃-40℃ ~ +85℃
ProtectionIP40, 6KV Lighting ProtectionIP40, 6KV Lighting Protection
HousingAluminum AlloyAluminum Alloy
MountingDIN-RailDIN-Rail

10. User Tips

  • Grounding is Key: Always ensure the switch chassis is properly grounded to protect against electrical surges and ensure stable operation in industrial environments.
  • Verify Power: Double-check your power supply voltage and polarity before connecting to prevent damage to the unit. The wide voltage range (9.6-60V DC) offers flexibility, but incorrect polarity can still cause issues.
  • Environmental Considerations: While designed for extreme temperatures, avoid direct exposure to excessive heat sources or constant direct sunlight to maximize lifespan.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your authorized PUSR distributor or reseller. Please have your product model and serial number available when requesting support.

© 2023 PUSR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.