1. Introduction
Welcome to the world of Robosen Interstellar Scout K1 Pro, a next-generation family entertainment robot designed to bring interactive fun and educational experiences. The K1 Pro is a lightweight, portable, free-walking humanoid robot equipped with high-precision servo joints and programmable options. It offers voice interaction, app interaction, and various programming methods.
2. Setup
2.1 Unboxing
Carefully remove the Robosen K1 Pro from its packaging. Ensure all components are present. The robot comes in its original box packaging.
2.2 Charging the Robot
The K1 Pro is powered by a 2000mAh battery. To charge:
- Locate the DC charging interface and Type-C data interface on the robot.
- Connect the robot to a power source using the provided power adapter. The power adapter input is 100V-240V-50/60Hz 0.6A, and the output is DC 8.4V 2A.
- A full charge takes approximately 1.5 hours.
- Once fully charged, the robot can operate for about 2 hours.
Warning: The product is NOT waterproof. Avoid contact with liquids.
2.3 App Installation
Download the official Robosen app from your device's app store. The app is compatible with all devices and uses Bluetooth BLE4.2 for communication.
3. Operating Instructions
The Robosen K1 Pro can be controlled via voice commands or through the mobile app.
3.1 Voice Control
The K1 Pro supports English voice commands. It comes with over 80 pre-installed voice commands, allowing for an immersive, screen-free experience. Simply speak clearly to the robot to initiate actions.
3.2 Mobile App Control
The Robosen app provides comprehensive control and programming options:
- Remote Control: Directly control the robot's movements and actions.
- Action Library: Access a variety of pre-defined actions.
- Programming: Utilize three types of programming:
- Manual Programming: An entry-level mode for hands-on action creation.
- Block-based Programming: Develop logical thinking skills by dragging and dropping action blocks.
- Voice Programming: Program the robot by speaking commands.
3.3 Movement and Technology
The K1 Pro features 17 high-precision servo motors, controlled by over 40 microchips and built with more than 1700 components. This advanced technology enables human-like bipedal gait, high-level adaptive control algorithms, bipedal gait stabilization, and artificial joint drives for dynamic movements.
Video demonstrating the Robosen K1 Pro's dynamic movements and soccer skills.
4. Maintenance
4.1 Cleaning
To clean your Robosen K1 Pro, use a soft, dry cloth. Do not use water or any cleaning solutions as the robot is not waterproof. Avoid getting dust or debris into the joints or interfaces.
4.2 Storage
When not in use, store the robot in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store it in its original packaging to protect it from dust and damage.
4.3 Battery Care
For optimal battery life, avoid fully discharging the robot frequently. If storing for an extended period, charge the battery to about 50% and recharge every few months.
5. Troubleshooting
- Robot not responding: Ensure the robot is fully charged. Check Bluetooth connection with the app. Restart the robot and the app.
- Voice commands not recognized: Speak clearly and ensure you are within the robot's listening range. Verify the voice language setting (English only).
- App connectivity issues: Ensure Bluetooth is enabled on your device and the robot is within 10 meters. Try restarting both the app and the robot.
- Robot movements are stiff or erratic: Check for any physical obstructions in the joints. Ensure the robot is on a flat, stable surface. If the issue persists, contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | Robosen K1 Pro |
| Product Size | 349 x 176 x 99 mm (13.7 x 6.9 x 3.9 inches) |
| Product Weight | 0.94 kg (33.16 oz) |
| Material | Aerospace-grade materials with quality coatings and a gunmetal gray matte finish |
| Servo Motors | 17 high-precision servo motors (Head×1, Hands 3×2, Legs 5×2) |
| Microchips | 40+ |
| Components | 1700+ |
| Communication Method | Bluetooth BLE4.2 |
| Control Mode | Mobile APP, Voice Control |
| Voice Commands | 80+ pre-installed commands |
| Voice Language | English only |
| Programming Types | Manual, Block-based, Voice |
| Interface | DC in charging interface, Type-C data interface |
| Battery Capacity | 2000mAh |
| Power Adapter Input | 100V-240V-50/60Hz 0.6A |
| Power Adapter Output | DC 8.4V 2A |
| Charging Time | Approx. 1.5 hours |
| Play Time (Full Charge) | Approx. 2 hours |
| Control Distance | Within 10 meters |
| Waterproof | No |
| Camera Equipped | No |
| Certification | CE |
6.1 K1 vs K1 Pro Comparison
| Feature | K1 | K1 Pro |
|---|---|---|
| Color | Pure White | Space Gray |
| Number of Voice Command Words | 41 | 81 |
| Number of Original Command Words | 6 | 6 |
| Dancing Moves (pre-installed app) | 9 | 9 |
| Pre-installed actions (voice command/app) | 44 | 75 |
| Material | Aluminum alloy frame structures | Aerospace-grade materials with quality coatings and a gunmetal grey matte finish |
7. User Tips
- Start with the App: For beginners, using the mobile app's remote control and pre-installed actions is a great way to familiarize yourself with the robot's capabilities before diving into programming.
- Explore Programming Modes: Experiment with manual programming for simple sequences, then move to block-based programming to understand logical flows. Voice programming offers a unique hands-free coding experience.
- Optimal Voice Recognition: Ensure a quiet environment for best voice command recognition. Speak clearly and at a moderate pace.
- Family Fun: The K1 Pro is designed for family interaction. Encourage collaborative programming and creative play with children.
8. Warranty and Support
For any product inquiries, technical support, or warranty claims, please refer to the official Robosen website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
