Sunster TB10PRO

Contents

Sunster TB10PRO Diesel Air Heater User Manual

Model: TB10PRO | Brand: Sunster

1. Introduction

Thank you for choosing the Sunster TB10PRO Diesel Air Heater. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your heater. Please read it thoroughly before use and keep it for future reference.

The Sunster TB10PRO is a versatile diesel air heater designed for various applications, including cars, RVs, homes, and campers. It features smart control options via Bluetooth APP, an LCD monitor, and an A2422 wireless temperature sensing switch with CO monitoring for enhanced safety and convenience.

Sunster TB10PRO Diesel Air Heater with A2422 controller, LCD, remote, and accessories
Figure 1: Sunster TB10PRO Diesel Air Heater and included components.

2. Important Safety Information

  • Ensure proper ventilation when operating the heater, especially in enclosed spaces.
  • The A2422 controller includes CO monitoring. Pay attention to CO alarms and ensure the unit is properly calibrated.
  • Do not block the air inlet or outlet. Maintain clear space around the heater for optimal performance and safety.
  • Keep flammable materials away from the heater.
  • Always use the correct fuel type (Diesel) and power supply (12V/24V DC or 110-240V AC) as specified.
  • Regularly inspect the exhaust pipe for any blockages or damage.
  • The heater is equipped with short-circuit protection, overheat protection (≥518°F/270°C), and intelligent temperature control. Do not attempt to bypass these safety features.
Safety features of the Sunster TB10PRO diesel heater including short-circuit, overheat, and intelligent temperature control
Figure 2: Enhanced Safety Features.

3. Package Contents

Please check the package for the following items:

  • 1 x Sunster TB10PRO Air Diesel Heater
  • 1 x A2422 Wireless Temperature Sensing Switch with CO monitoring
  • 1 x Remote Control
  • 1 x AC Power Adapter (US/EU/UK PLUG)
  • 1 x 4m Switch Extension Cable
  • 1 x Heat Protection Sleeve
  • 1 x Silencer
  • 1 x Exhaust Pipe
  • 1 x 7.5*200cm Stretchable Heat-Resistant Insulation Flexible Air Outlet Pipe
  • 1 set Screw Accessory Kit
  • 1 x DC Battery Power Cable
  • 1 x User Manual
All components included in the Sunster TB10PRO diesel heater package
Figure 3: Included Accessories.

4. Product Overview

The Sunster TB10PRO is designed as a compact toolbox-style unit for portability and ease of use. Key components and their functions are outlined below.

Diagram showing the product information and dimensions of the Sunster TB10PRO diesel heater, labeling hot air outlet, exhaust pipe, metal buckle, air filter, power input, air inlet, machine upper cover, and switch remote control placement box.
Figure 4: Product Information and Dimensions.
  • Hot Air Outlet: Where heated air exits the unit.
  • Exhaust Pipe: Discharges combustion gases.
  • Metal Buckle: Secures the toolbox cover.
  • Air Filter: Filters incoming air for combustion.
  • Power Input Interface: Connects to DC or AC power.
  • Air Inlet: Draws in air for heating.
  • Machine Upper Cover: Protects internal components.
  • Switch Remote Control Placement Box: Storage for the remote control.
Close-up of the A2422 Wireless Temperature Sensing Switch with CO monitoring, showing its display and buttons.
Figure 5: A2422 Wireless Temperature Sensing Switch.
Detailed view of the upgraded LCD switch for the Sunster TB10PRO diesel heater, showing buttons for ventilation mode, gear mode, temperature mode, and shutdown, along with display information.
Figure 6: Upgraded LCD Switch.
Internal structure diagram of the Sunster TB10PRO diesel heater, labeling the 6L fuel tank, air inlet, oil pump, AC DC adapter power, exhaust pipe, control panel, hot air outlet, and oil pipe.
Figure 7: Structure Diagram.

5. Specifications

FeatureSpecification
Brand NameSunster
ModelTB10PRO
Rated Power8KW
Working VoltageDC12V or DC24V
Adapter InputAC110-240V 50-60Hz
Fuel TypeDiesel
Built-in Fuel Tank6L
Fuel Consumption0.16 - 0.45 liters / hour
Remote Control Distance98 ft / 30 m
Radiator Working Temperature-40~+50°C
Oil Pump Operating Temperature-40~+40°C
Control MethodLCD + Remote Control + Bluetooth APP
Applicable AltitudeBelow 5500 m / 18045 ft
Adjustable Temperature Range46℉-95℉ / 8℃-35℃
Special FeaturesA2422 Upgraded Wireless Temperature Sensing Switch with CO monitoring, Bluetooth APP Function, Automatic Start & Stop (constant temperature), Ventilation Function, Adaptive Plateau (Display Altitude, Automatic), Turbo Heat Mode, Timer Setting
Item TypeHeating & Fans
MaterialPA
CertificationRoHS, FCC, CE
Item Weight10 kg (approx.)
Air Outlet Pipe Size7.5cm diameter, 200cm length (flexible)

6. Setup and Installation

6.1 Power Connection

The Sunster TB10PRO supports dual power input:

  • DC 12V/24V: Use the provided DC battery power cable to connect to your vehicle's battery or a suitable 12V/24V power source.
  • AC 110-240V: Use the included AC-DC power adapter for household outlets. This allows for versatile use in professional workshops, garages, or homes.
Diagram illustrating multiple power connection options for the diesel heater, including DC 12V/24V for vehicles and 110-240V AC for power outlets.
Figure 8: Multiple Power Options.

6.2 Exhaust Pipe Installation

The exhaust pipe is designed for side installation, eliminating the need for bottom padding. This design helps prevent exhaust pipe blockage.

  • Connect the exhaust pipe to the designated outlet on the heater.
  • Secure the connection using the provided clamps.
  • Ensure the exhaust pipe is routed safely away from flammable materials and living spaces, directing exhaust gases outdoors.

6.3 Air Filter and Air Outlet Duct

  • The heater features an upgraded integrated air filter, which automatically filters intake air. No separate inlet pipe installation is required for the air filter.
  • Attach the 7.5*200cm stretchable heat-resistant insulation flexible air outlet pipe to the hot air outlet.
  • Direct the air outlet pipe to the area you wish to heat.
Installation details for the Sunster TB10PRO diesel heater, showing exhaust pipe installation, AC power adapter, upgraded integrated air filter, and upgraded air outlet duct.
Figure 9: Installation Details.

7. Operation

7.1 Starting the Heater

The Sunster TB10PRO offers four ways to start up:

  • LCD Panel: Direct control from the heater's integrated LCD panel.
  • A2422 Wireless Switch: Use the A2422 wireless temperature sensing switch for remote operation and CO monitoring.
  • Smartphone App: Control the heater via Bluetooth using the dedicated smartphone app (search 'Sunster' in Google Play for Android or App Store for iOS).
  • Remote Control: Use the included remote control for convenient operation from up to 30 meters away.
Diagram showing four ways to start up the Sunster TB10PRO diesel heater: LCD Panel, A2422 wireless switch, Smartphone App, and Remote Control.
Figure 10: 4 Ways to Start Up.

7.2 LCD Switch Operation (A2409)

The upgraded LCD switch provides one-click access to various functions without complex key combinations.

  • Power On/Off: Press the power button to turn the heater on or off.
  • Mode Switching: Press the 'Settings Key' to cycle through modes: Gear mode (LEU), Temperature control mode (TEP), Constant temperature mode (AUT), Intense heat mode (SUP), and Ventilation mode (FAN).
  • Parameter Adjustment: Use the Increase/Decrease buttons to adjust parameters within each mode (e.g., gear level, target temperature).
  • Language Settings: Available languages include German, English, Russian.
  • Timer Setting: Schedule heater operation.
  • Adaptive Plateau: Automatically adjusts fuel output based on altitude and displays current altitude.

7.3 A2422 Wireless Temperature Sensing Switch with CO Monitoring

The A2422 controller enhances safety and convenience with its wireless capabilities.

  • Built-in Temperature Sensor: Detects current ambient temperature.
  • CO Detection Function: Features a CO alarm and automatic shutdown if unsafe CO levels are detected.
  • Remote Control: Power on/off, mode selection, power/gear adjustment, and temperature settings.
  • Switch Matching: To match the A2422 with the heater, long press the 'Add button' on the A2422 in shutdown state until the Bluetooth icon flashes. Then, on the heater switch, press and hold the 'power button' and 'right button' simultaneously. The screen will show 'ADD -> SUC' for a successful match.
Detailed functions of the Upgraded Wireless Temperature Switch A2422 with CO monitoring, including remote control, built-in temperature sensor, battery indicator, CO concentration display, and calibration.
Figure 11: A2422 Wireless Temperature Switch Functions.

7.4 Bluetooth APP Control

For ultimate convenience, download the 'Sunster' app on your smartphone.

  • Timing Function: Set schedules for heating.
  • Language Settings: Adjust language preferences.
  • Gear Settings: Control heating power levels.
  • Automatic Start & Stop: Maintain a constant temperature.
  • Blow Mode: Activate ventilation.
Screenshot of the Bluetooth app interface for controlling the Sunster diesel heater, showing options for timing, language, gear, automatic start/stop, and blow mode.
Figure 12: Bluetooth App Control Interface.

7.5 Video Instructions

For detailed visual instructions on switch matching, power control, mode switching, parameter adjustment, and various settings, please refer to the official product video:

Video 1: Comprehensive guide on switch matching, power control, mode switching, parameter adjustment, CO/time view/set, temperature compensation, temperature unit switching, CO alarm/shutdown, backlight control, ambient temperature settings, CO calibration, and firmware upgrade for the Sunster TB10PRO heater.

8. Operating Modes

  • Gear Mode (LEU): Adjust the heating power level manually.
  • Temperature Control Mode (TEP): Set a target temperature, and the heater will adjust its output to maintain it.
  • Constant Temperature Mode (AUT): The heater automatically turns off when the set temperature is reached and reactivates when the temperature drops, ensuring consistent warmth and energy efficiency.
  • Intense Heat Mode (SUP): Provides maximum heating output for rapid temperature increase.
  • Ventilation Mode (FAN): Circulates air without heating, useful for preventing moisture or for cooling on warmer days.

9. Maintenance

  • Cleaning: Regularly wipe down the exterior of the heater with a damp cloth. Ensure the air inlet and outlet are free from dust and debris.
  • Fuel Tank: Keep the fuel tank clean and free of contaminants. Use only clean diesel fuel.
  • Exhaust System: Periodically check the exhaust pipe and silencer for any blockages, leaks, or damage. Ensure all connections are secure.
  • Air Filter: The integrated air filter is designed for automatic filtration. However, if operating in very dusty environments, occasional inspection and cleaning of the filter area may be beneficial.
  • Storage: When not in use for extended periods, ensure the heater is clean and dry. Store it in a cool, dry place.

10. Troubleshooting

ProblemPossible CauseSolution
Heater not turning onNo power, loose connection, faulty switchCheck power supply, ensure cables are securely connected, test with a different power source if possible.
No heat outputLow fuel, clogged fuel line, air in fuel system, faulty glow plugCheck fuel level, inspect fuel lines, bleed air from the fuel system (refer to detailed manual if available), consult support.
Excessive smokePoor combustion, incorrect fuel-air mixture, clogged exhaustEnsure proper ventilation, check air filter, inspect exhaust pipe for blockages.
CO alarm soundsHigh carbon monoxide levels, sensor malfunctionImmediately ventilate the area. Move the heater to an open space. Check exhaust for blockages. If alarm persists, discontinue use and seek professional help.
Remote control/App not workingBattery low, not paired, out of rangeReplace batteries in remote. Re-pair the remote/app with the heater (refer to video instructions). Ensure device is within range.
Error codes on LCDInternal faultRefer to the full user manual for a list of error codes and their solutions. If unavailable, contact customer support.

11. User Tips

  • Exhaust Pipe Size: The air outlet pipe is 7.5cm in diameter. While the exhaust pipe size is not explicitly listed, it is designed to be compatible with the unit. Ensure all exhaust connections are tight to prevent leaks.
  • Pre-heating: Allow the heater a few minutes to pre-heat after startup for optimal performance, especially in very cold conditions.
  • Fuel Quality: Using high-quality diesel fuel can prevent clogs and ensure efficient combustion.
  • Altitude Mode: Take advantage of the adaptive plateau feature when operating at high altitudes to ensure correct fuel-air mixture and prevent issues.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official Sunster website. Keep your purchase receipt as proof of purchase.

© 2024 Sunster. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.