1. Product Overview
This manual provides detailed instructions for the safe and efficient operation and maintenance of your HZB-20AF Ice Maker Machine. Please read this manual thoroughly before using the appliance and keep it for future reference.
Figure 1: HZB-20AF Ice Maker Machine (Dark Gray)
2. Safety Instructions
- Ensure the appliance is placed on a stable, level surface.
- Do not block ventilation openings.
- Use only potable water for ice production.
- Keep the appliance away from heat sources and direct sunlight.
- Unplug the appliance before cleaning or maintenance.
- Do not immerse the appliance in water or other liquids.
- This appliance is intended for household and light commercial use (Hotel, garage, Commercial, Household).
3. Setup
3.1 Unpacking
- Carefully remove the ice maker from its packaging.
- Remove all packing materials, including tape and protective films.
- Inspect the appliance for any damage. If damaged, do not operate and contact your supplier.
3.2 Placement
- Place the ice maker on a firm, level countertop or surface.
- Ensure there is adequate space around the unit for proper ventilation (at least 15 cm on all sides).
- Avoid placing the unit near heat-generating appliances or in direct sunlight.
Figure 2: Unit Dimensions (Width: 252mm, Depth: 360mm, Height: 371mm)
3.3 Initial Cleaning
Before first use, it is recommended to clean the ice maker. Refer to the 'Maintenance' section for detailed cleaning instructions.
3.4 Adding Water
The HZB-20AF ice maker supports two methods for adding water:
- Barreled Water: Place a standard barreled water bottle (not included) onto the designated dispenser area on top of the unit.
- Manual Fill: Open the top lid and manually pour potable water into the water tank.
Figure 3: Water Filling Options (Barreled Water and Manual Fill)
4. Operating Instructions
4.1 Control Panel Overview
The ice maker features a user-friendly push-button control panel with LED indicators:
- ON/OFF Button: Powers the unit on or off.
- TIMER/CLEAN Button: Activates the self-cleaning function or sets a timer.
- '+' and '-' Buttons: Adjust settings, such as ice cube size or timer duration.
- Indicators: LED lights show working status, temperature, 'Ice Full', and 'Add Water'.
Figure 4: Control Panel and Key Features
4.2 Ice Making Steps
- Add Water: Ensure the water tank is filled with potable water using either the barreled water method or manual fill.
- Power On & Select Size: Press the ON/OFF button to turn on the machine. Use the '+' and '-' buttons to select your desired ice cube size. The machine will begin the ice-making cycle, which typically completes in 7-15 minutes.
- Remove Ice: Once the ice basket is full, the 'Ice Full' indicator will illuminate. Use the provided ice scoop to remove the ice cubes.
Figure 5: Ice Making Steps
5. Maintenance
5.1 Regular Cleaning
To ensure optimal performance and hygiene, regular cleaning is essential:
- Self-Cleaning Function: Press the 'TIMER/CLEAN' button to activate the automatic cleaning cycle. Follow the instructions in the display if prompted.
- Manual Cleaning:
- Unplug the ice maker from the power outlet.
- Drain any remaining water from the reservoir.
- Clean the interior with a soft cloth and a mild detergent solution. Rinse thoroughly.
- Wipe down the exterior with a damp cloth.
- Ensure all parts are dry before re-plugging the unit.
5.2 Storage
If the ice maker will not be used for an extended period:
- Perform a thorough cleaning as described above.
- Ensure the unit is completely dry.
- Store the ice maker in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
If you encounter issues with your ice maker, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice | No water in reservoir ('Add Water' indicator on) | Add water to the reservoir. |
| Ice production is slow | Ambient temperature too high; poor ventilation | Ensure proper ventilation around the unit; move to a cooler location. |
| 'Ice Full' indicator is on, but basket is not full | Ice sensor is dirty or obstructed | Clean the ice sensor. |
| Unit not turning on | No power supply | Check power cord connection and wall outlet. |
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | HZB-20AF |
| Color | Dark Gray |
| Shell Material | Stainless Steel |
| Ice Cube Size | 22 x 22 x 22 mm (Square) |
| Ice Making Capacity | 20 kgs / 24 hours |
| Power Supply | 220-240V/50Hz, 115V/60Hz |
| Power (W) | 130W |
| Foaming Agent | C5H10 |
| Refrigerant | R290 |
| Net Weight / Gross Weight | 9.5 kgs / 11 kgs |
| Unit Dimensions (W x D x H) | 252 x 360 x 371 mm |
| Packaging Size (W x D x H) | 294 x 396 x 436 mm |
| Operating Language | English |
| Application | Hotel, Garage, Commercial, Household |
| Control Panel Type | Push Button |
| Noise Level | Less than 35 dB |
8. User Tips
- For optimal ice production, ensure the ice maker is placed in a well-ventilated area to maximize heat dissipation efficiency.
- The low noise operation (less than 35 dB) makes this ice maker suitable for various environments without causing disturbance.
- Always use fresh, clean water for the best-tasting ice.
- Regularly check the 'Add Water' and 'Ice Full' indicators on the control panel to ensure continuous operation.
9. Warranty and Support
This product comes with free spare parts for after-sales service. For any technical support, warranty claims, or further inquiries, please contact your seller or the manufacturer directly.
Please retain your proof of purchase for warranty purposes.
