Introduction
Thank you for choosing the ANDELI MIG-250ME LED IGBT Welder. This versatile 3-in-1 machine is designed for Gasless MIG, Stick (MMA), and Lift TIG welding, offering portability and ease of operation for various applications, including plants, construction sites, and ships. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your welding machine.
Safety Information
WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.
- Electric Shock: Can kill. Do not touch live electrical parts. Wear dry insulating gloves and protective clothing. Insulate yourself from work and ground.
- Fumes and Gases: Can be hazardous to your health. Keep your head out of the fumes. Use enough ventilation or exhaust at the arc to keep fumes and gases away from the breathing zone.
- Arc Rays: Can injure eyes and burn skin. Wear a welding helmet with a proper shade of filter to protect your face and eyes when welding or watching. Wear appropriate safety glasses with side shields beneath your helmet. Wear protective clothing made from durable, flame-resistant material.
- Fire and Explosion: Welding sparks can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
- Burns: Hot metal can cause severe burns. Do not touch hot parts with bare hands. Allow the welding machine and workpiece to cool before handling.
- Read and understand the entire manual before operating the machine.
Product Overview
The ANDELI MIG-250ME is a compact and powerful inverter DC welding machine featuring IGBT technology for enhanced efficiency and reliability. It includes a digital display screen for easier use and synergic controls for automatic voltage and wire feed speed matching.
Included Components:
- 1 x MIG Welder (Main Unit)
- 1 x Electrode Holder
- 1 x Ground Clamp
- 2 x Flux Cored Wire (0.5kg each)
- 2 x Nozzles
- 5 x Contact Tips
- 1 x Hammer
- 1 x 3m MIG Gun
Machine Features:
- 3-in-1 Multi-Process: Gasless MIG, Stick (MMA), and Lift TIG welding capabilities.
- IGBT Inverter Technology: Provides stable arc, high efficiency, and increased duty cycle.
- Synergic Design: Automatically matches voltage and wire feed speed, and adjusts current based on plate thickness, ideal for beginners.
- Digital Display Screen: Graphical interface for easy parameter adjustment and monitoring.
- Split Torch Design: MIG welding torch is designed for easy repair and replacement, ensuring smoother wire feeding.
- Portable: Lightweight design (4.1kg) for easy transport.
Visual Reference:
Specifications
The following table details the technical specifications of the ANDELI MIG-250ME (MIG-135) welding machine:
| Parameter | Specification |
|---|---|
| Model | MIG-135 |
| Rated Input Voltage (V) | AC220±15%, 50/60Hz (also supports 110V) |
| Rated Input Current (A) | MIG: 18.7A / MMA: 23.2A |
| Output Current (A) | MIG: 40-120A / MMA: 20-120A |
| No-load Voltage (V) | 60V |
| Rated Duty Cycle (%) | 60% @ 40°C (MIG) |
| Efficiency (%) | 85% |
| Power Factor (cosφ) | 0.73 |
| Protection Class | IP21S |
| Insulation Class | F |
| Welding Thickness | 1-4mm |
| Weight (kg) | 4.1kg (approx. 9.04 lbs) |
| Wire Feeding Speed | 12 (unit not specified, typically m/min) |
| MIG Solid Wire Diameter | 0.8mm, 1.0mm |
| Max. Load Power Capacity | 5.9KW |
| Cooling | Air-cool |
Setup
1. Unpacking and Inspection:
Carefully remove the welding machine and all accessories from the packaging. Inspect for any damage that may have occurred during transit. Report any damage to the supplier immediately.
2. Power Connection:
The ANDELI MIG-250ME supports both 110V and 220V input voltages. Ensure the power source matches the machine's requirements and that the outlet is properly grounded. Use an appropriate adapter if necessary. The machine will automatically detect the input voltage.
3. Connecting Welding Cables:
- Ground Clamp: Connect the ground clamp cable to the negative (-) terminal on the front panel. Secure the ground clamp to the workpiece or a sturdy metal workbench to ensure a good electrical connection.
- MIG Torch: Connect the MIG torch cable to the designated MIG connection point on the front panel. Ensure it is securely fastened.
- Electrode Holder (for MMA/Stick welding): Connect the electrode holder cable to the positive (+) terminal on the front panel.
4. Installing Welding Wire (for MIG/Flux-Cored Welding):
This machine is designed to apply 2LB welding wire, specifically flux-cored wire for gasless MIG welding.
- Open the wire spool compartment.
- Place the 2LB wire spool onto the spool holder, ensuring it rotates freely.
- Feed the welding wire through the wire guide and into the drive roller mechanism.
- Close the drive roller tension arm and adjust the tension. The tension should be firm enough to feed the wire without slipping, but not so tight that it deforms the wire.
- With the MIG torch pointed away from yourself and others, press the trigger to feed the wire through the liner and out of the contact tip.
Operating Instructions
1. Powering On:
After all connections are made, turn on the main power switch located on the rear of the machine. The digital display will illuminate.
2. Mode Selection:
Use the control panel buttons to select your desired welding process: MIG (Gasless Flux-cored), Stick (MMA), or Lift TIG. The selected mode will be indicated on the digital display.
3. Synergic Control and Parameter Adjustment:
The machine features a synergic design, which simplifies parameter setting. Once you select the material type and thickness, the machine will automatically suggest optimal voltage and wire feed speed settings. You can fine-tune these settings using the control knobs if needed. The digital display provides clear feedback on current, voltage, and other parameters.
4. Welding Process (General Steps):
- Ensure proper personal protective equipment (PPE) is worn.
- Clean the workpiece thoroughly to remove rust, paint, or grease.
- Secure the ground clamp to the workpiece.
- Position the torch/electrode at the starting point of the weld.
- Initiate the arc (for MIG, press the trigger; for Stick, strike the electrode; for Lift TIG, touch and lift the tungsten).
- Maintain a consistent travel speed and arc length for a quality weld.
- After welding, allow the workpiece to cool before handling.
5. Applicable Materials:
The ANDELI MIG-250ME is widely applicable for welding various materials, including:
- Metal Cage
- Galvanized Sheet
- Mild Steel
- Stainless Steel
- Square Pipe
- Cast Iron
Maintenance
1. Regular Cleaning:
- Keep the machine clean and free from dust and debris. Use compressed air to blow out the internal components periodically, especially the cooling fan and heat sinks.
- Wipe down the exterior with a clean, dry cloth.
2. Consumables Inspection and Replacement:
- Contact Tips: Inspect contact tips regularly for wear and spatter buildup. Replace them when the opening becomes enlarged or clogged.
- Nozzles: Clean spatter from the MIG torch nozzle frequently. Replace if it becomes damaged or excessively worn.
- Wire Liner: If wire feeding becomes inconsistent, the wire liner inside the MIG torch may be clogged or worn. It may need cleaning or replacement.
- Electrode Holder/Ground Clamp: Ensure connections are tight and free from corrosion. Replace if damaged.
3. Storage:
Store the welding machine in a dry, clean environment, away from excessive dust, moisture, and extreme temperatures.
Troubleshooting
This section covers common issues you might encounter. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply; Power switch off; Faulty power cord/plug | Check power outlet and circuit breaker; Ensure power switch is ON; Inspect power cord for damage. |
| No arc or weak arc | Poor ground connection; Incorrect welding parameters; Worn contact tip/electrode; Machine in wrong mode | Ensure ground clamp is secure and on clean metal; Adjust current/voltage; Replace contact tip/electrode; Verify correct welding mode is selected. |
| Wire feeding issues (MIG) | Wire spool tangled; Drive roller tension incorrect; Clogged/worn wire liner; Worn contact tip | Untangle wire spool; Adjust drive roller tension; Clean or replace wire liner; Replace contact tip. |
| Overheating / Thermal overload | Exceeded duty cycle; Blocked ventilation; High ambient temperature | Allow machine to cool down; Ensure proper ventilation around the machine; Reduce welding time or current. |
User Tips
- Practice Makes Perfect: If you are new to welding, start with scrap pieces of metal to get a feel for the machine and different settings before working on your main project.
- Cleanliness is Key: Always ensure your workpiece and ground connection points are clean and free of rust, paint, or oil. This significantly improves weld quality and arc stability.
- Proper Wire Tension: For MIG welding, incorrect wire tension can lead to feeding problems. Adjust the drive roller tension so that the wire feeds smoothly but can be stopped by hand with moderate resistance.
- Consumables: Keep spare contact tips and nozzles on hand. These are wear-and-tear parts and replacing them regularly will ensure consistent weld quality.
- Ventilation: Always weld in a well-ventilated area or use local exhaust ventilation to remove welding fumes.
Warranty and Support
The ANDELI MIG-250ME LED IGBT Welder comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact our customer service:
- WhatsApp: +86 16633953613
- Tel: +86 166 3395 3613
- Email: 1428040867@qq.com