1. Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your ANDELI CUT-160 Industrial Arc Plasma Cutting Machine. The CUT-160 is a versatile 2-in-1 cutting machine featuring a built-in air compressor, capable of both MMA (Manual Metal Arc) welding and HF (High Frequency) plasma cutting. It is designed for industrial use, offering robust performance for cutting various metal plates.
2. Safety Information
Always prioritize safety when operating welding and cutting equipment. Failure to follow safety precautions can result in serious injury or death.
- Electric Shock: This machine operates at high voltages. Ensure proper grounding and insulation. Never touch live electrical parts.
- Fumes and Gases: Welding and cutting produce fumes and gases that can be hazardous to your health. Work in a well-ventilated area or use a fume extractor.
- Arc Rays: Arc rays can burn eyes and skin. Always wear appropriate welding helmet with proper shade, safety glasses, and protective clothing.
- Fire and Explosion: Sparks and hot metal can cause fires. Keep flammable materials away from the work area.
- Hot Parts: Equipment and workpieces become hot during operation. Allow them to cool before handling.
- Noise: High noise levels can damage hearing. Wear ear protection.
- Moving Parts: Keep hands and body clear of moving parts.
3. Product Overview
The ANDELI CUT-160MY is an advanced inverter-based plasma cutting machine designed for industrial applications. Key features include:
- Built-in Air Pump: Eliminates the need for an external air compressor for many applications, offering a compact 2-in-1 solution.
- Dual Functionality: Capable of both MMA welding and HF plasma cutting.
- High Frequency (HF) Arc Start: Provides reliable and clean arc initiation.
- Efficient Cooling System: Equipped with a condenser and efficient heat sink for rapid heat dissipation, extending the lifespan of cutting nozzles and the machine.
- Versatile Cutting: Suitable for cutting various materials including carbon steel, cast iron, aluminum, profiled plates, pipes, and steel bars.
4. Setup
4.1 Power Connection
The CUT-160MY model requires a 380V, 3-phase power supply. Ensure your power source matches these requirements. The machine also supports 220V for other models in the series, but for CUT-160MY, 380V is specified.
For 3PH AC380V Connection: Connect the three phase wires (typically L1, L2, L3) and the ground wire to the corresponding terminals as shown in the diagram. Always consult a qualified electrician for proper installation.
4.2 Torch and Ground Cable Connection
- Connect the plasma cutting torch to the designated 'CUT TORCH' port on the front panel.
- Connect the torch switch cable to the 'TORCH SWITCH' port.
- Connect the ground clamp cable to the negative (-) terminal.
- Connect the MMA/YH cable to the positive (+) terminal for MMA welding, or ensure the ground cable is securely connected to the workpiece for cutting.
4.3 Air Connection
The CUT-160MY features a built-in air pump. For optimal performance or when cutting thicker materials, an external air pump can also be utilized. Ensure the air inlet is clear and unobstructed.
5. Operating Instructions
5.1 Power On and Mode Selection
- Ensure all connections are secure and the work area is safe.
- Turn on the main power switch of the machine.
- Select the desired operating mode (MMA or CUT) using the control panel.
5.2 Adjusting Parameters
Use the control knob and display to set the appropriate current for your material and thickness. Refer to the specifications table for rated output current ranges.
5.3 Plasma Cutting Operation
- Securely attach the ground clamp to the workpiece.
- Position the plasma torch nozzle close to the starting point of the cut.
- Initiate the arc using the torch switch (HF start).
- Maintain a steady travel speed and torch height for a clean cut.
- The CUT-160MY can cut up to 45mm with its built-in air pump and up to 55mm with an external air pump.
5.4 Applicable Materials and Scenes
The machine is suitable for a wide range of cutting tasks:
- Carbon Steel Plate Cutting
- Automatic Pipe Cutting
- Profiled Plate Cutting
- Cast Iron Cutting
- All Kinds of Steel Bar Cutting
- Aluminum Plate Cutting
- Applications include excavator cutting, I-beam cutting, steel structure work, stainless steel cutting, CNC cutting, steel plate cutting, and scrap cutting.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your cutting machine.
- Cooling System: The machine features a fast intelligent cooling system with a condenser. Ensure the air vents are kept clean and free from obstructions to allow for efficient heat dissipation. This helps maintain a lower nozzle temperature (e.g., 58°C with condenser vs. 90°C without) and prolongs nozzle electrode life.
- Nozzle and Electrode: Inspect the cutting nozzle and electrode regularly for wear. Replace them as needed to maintain cut quality and prevent damage to the torch.
- General Cleaning: Keep the machine clean from dust and debris. Use compressed air to blow out internal components periodically, ensuring the power is disconnected.
- Cable Inspection: Check all cables (power, torch, ground) for damage or wear before each use. Replace any damaged cables immediately.
7. Troubleshooting
This section provides general guidance for common issues. For complex problems, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply; Main switch off; Faulty power cable | Check power connection; Turn on main switch; Inspect/replace power cable |
| No arc during cutting | Ground clamp not connected; Incorrect current setting; Worn nozzle/electrode; Air pressure issue | Ensure ground clamp is secure; Adjust current; Replace consumables; Check air supply |
| Poor cut quality | Incorrect travel speed; Incorrect torch height; Worn nozzle/electrode; Insufficient current | Adjust travel speed and torch height; Replace consumables; Increase current |
| Overheating indicator active | Exceeded duty cycle; Blocked air vents; High ambient temperature | Allow machine to cool; Clear air vents; Operate in cooler environment |
8. Specifications
Detailed technical specifications for the ANDELI CUT-160MY model:
| Parameter | Value (CUT-160MY) |
|---|---|
| Input Voltage | 3PH AC380V±15% |
| Function | MMA, CUT |
| Rated Input Power (MMA/CUT) | 17.7KVA / 17.7KVA |
| Rated Input Current (MMA/CUT) | 26A / 26A |
| Rated Output Current (MMA/CUT) | 30-320A / 30-110A |
| No Load Voltage (MMA/CUT) | 70V / 310V |
| Duty Cycle (40%) (MMA/CUT) | 320A / 110A |
| Protection Grade | IP21S |
| Insulation Grade | F |
| Method of Arc Start | Uncontact (HF) |
| Weight | 38KG |
| Dimension (L x W x H) | 540*465*295mm |
| Cutting Thickness (Built-in air pump) | 45mm |
| Cutting Thickness (External air pump) | 55mm |
9. User Tips
- For optimal cutting performance on thicker materials, consider using an external air compressor to achieve the maximum cutting thickness of 55mm.
- Regularly check the air filter for the built-in air pump and clean or replace it as necessary to ensure consistent air flow and prevent damage.
- When switching between MMA and CUT modes, always ensure the machine is powered off or in standby mode to prevent accidental operation.
10. Warranty & Support
10.1 Warranty
The ANDELI CUT-160MY comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
10.2 Customized Support
ANDELI offers customized support for product function, performance, and appearance (OEM, ODM). For specific requirements and MOQ details, please contact customer service.
10.3 Contact Information
For any questions, technical support, or service inquiries, please contact ANDELI customer service:
- WhatsApp: +86 16633953613
- Tel: +86 166 3395 3613
- Email: 1428040867@qq.com