ANDELI Tig-250P AC DC 250 A

Contents

ANDELI LCD Smart Tig-250P AC DC 250 A Welding Machine User Manual

Model: Tig-250P AC DC 250 A

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ANDELI LCD Smart Tig-250P AC DC 250 A Welding Machine. This versatile inverter welder supports multiple welding processes including AC DC TIG, AC DC PULSE, MMA, Cold welding, and Lift TIG, making it suitable for a wide range of materials such as carbon steel, stainless steel, aluminium, and titanium.

ANDELI Tig-250P AC DC 250 A Welding Machine
Figure 1: ANDELI Tig-250P AC DC 250 A Welding Machine

2. Safety Information

WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.

  • Always wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
  • Ensure adequate ventilation to avoid inhaling welding fumes.
  • Protect bystanders from arc rays and hot metal.
  • Do not operate the machine in damp or wet conditions.
  • Ensure the machine is properly grounded.
  • Disconnect power before performing any maintenance or service.
  • Read and understand all instructions before operating the machine.

3. Product Overview and Key Features

The ANDELI Tig-250P AC DC 250 A is a professional-grade, multifunctional inverter welding machine designed for precision and versatility. Its LCD smart interface allows for easy parameter adjustment and monitoring.

Key Features:

  • Multifunctional: Supports AC DC TIG, AC DC PULSE, MMA, Cold welding, and Lift TIG.
  • Smart LCD Display: Provides clear readouts and intuitive control.
  • Versatile Material Compatibility: Suitable for carbon steel, stainless steel, aluminium, and titanium.
  • Adjustable Cold-time: For precise control in cold welding applications.
  • Channel Storage: 6 available channels for saving preferred welding parameters.
  • Balance Control: Ensures clean weld beads, especially important for AC TIG on aluminum.
  • PRE/POST GAS Function: Prevents oxidation of the weld pool.
  • Efficient Performance: Rated duty cycle of 60% @40°C (TIG).
  • Welding Thickness:
    • Aluminium welding: 0.5-5mm
    • Cold Welding: 0.3-1mm
    • TIG welding: 0.8-8mm
AC-TIG Welder Visible Weld Bead
Figure 2: AC-TIG welding capability for aesthetically pleasing weld beads.

4. Setup Instructions

4.1 Unpacking and Inspection

  • Carefully remove the welding machine and all accessories from the packaging.
  • Inspect the machine for any signs of damage during transit. If damaged, contact customer service immediately.
  • Verify that all components listed in the package contents are present.

4.2 Package Contents

  • Ground Clamp 2M x 1
  • TIG torch WP-26 4M x 1
  • Gas Pipe 3M x 1
  • Hose Clamp x 2
  • Collet x 20
  • Nozzle x 20pcs
  • Tungsten Electrode x 30
  • Foot pedal x 2
  • Pyrex cup kit 49pcs x 1box
  • WP-9F 4M Torch 4M x 1

4.3 Power Connection

  • The machine operates on a 220V single-phase power supply. Ensure your power source meets this requirement.
  • Connect the power cable to a suitable grounded outlet.

4.4 Connecting Welding Accessories

  1. Ground Clamp: Connect the ground clamp cable to the appropriate terminal on the front panel (usually marked with a ground symbol or '-'). Secure the clamp to the workpiece.
  2. TIG Torch: Connect the TIG torch (WP-26 or WP-9F) to the designated TIG torch connector on the front panel. Ensure a secure connection for both power and gas lines.
  3. Gas Supply: Connect one end of the gas pipe to your inert gas cylinder (e.g., Argon) via a regulator, and the other end to the gas inlet on the welding machine. Use the provided hose clamps to secure connections.
  4. Foot Pedal: If using a foot pedal for current control, connect it to the dedicated foot pedal port on the machine.
Front panel connections of the ANDELI Tig-250P
Figure 3: Front panel showing connections for torch, ground, and controls.

5. Operating Instructions

5.1 Control Panel Overview

The ANDELI Tig-250P features an intuitive LCD smart control panel. Refer to Figure 4 for a visual guide to the controls.

Detailed view of the ANDELI Tig-250P control panel
Figure 4: Detailed view of the LCD Smart Control Panel.

The control panel includes:

  • Ammeter Display: Shows the welding current.
  • Mode Selection: Buttons for AC DC TIG, AC DC PULSE, MMA, Cold, Lift TIG.
  • Parameter Adjustment Knobs: For fine-tuning settings like Current, Pulse Frequency, Base Current, Up-slope/Down-slope time, Post Gas time, AC Frequency, and Clean Width.
  • Channel Storage: Buttons to save and recall up to 6 sets of welding parameters.

5.2 Welding Modes and Settings

Select the appropriate welding mode based on your material and application:

  • AC TIG: Ideal for aluminum and magnesium alloys. Use the AC Frequency and Clean Width controls to optimize arc stability and cleaning action.
  • DC TIG: Suitable for stainless steel, carbon steel, copper, and titanium.
  • Pulse TIG: Provides better control over heat input, reducing distortion and improving penetration. Adjust Pulse Frequency and Base Current.
  • MMA (Stick Welding): For general-purpose welding with coated electrodes.
  • Cold Welding: For extremely thin sheets (0.3-1mm), minimizing heat input. Utilize the adjustable Cold-time feature.
  • Lift TIG: A non-HF start TIG mode, useful in electromagnetically sensitive environments.

5.3 Parameter Adjustment Guide

Use the control knobs and buttons to set your welding parameters:

  • Current (Amps): Adjust according to material thickness and type. Range: 10-250A.
  • Up-slope Time: Controls the time it takes for the current to ramp up to the welding current (0.1-5s).
  • Down-slope Time: Controls the time it takes for the current to ramp down after welding (0.1-5s).
  • Post Gas Time: Sets the duration of shielding gas flow after the arc extinguishes to protect the cooling weld pool (5-25s).
  • Pulse Frequency: For Pulse TIG, adjust the frequency of current pulses (50/60Hz).
  • Base Current: For Pulse TIG, sets the lower current level during the pulse cycle (10-250A).
  • AC Frequency Range: For AC TIG, adjusts the frequency of the AC waveform (50-150Hz).
  • Clean Width Range: For AC TIG, controls the balance between cleaning action and penetration (25%-75%).

Saving Parameters: The machine allows for storing up to 6 sets of preferred parameters. Consult the on-screen prompts or specific buttons on the control panel to save and recall these settings.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the exterior of the machine with a dry, soft cloth. Ensure cooling vents are free from dust and debris. Use compressed air to gently blow out internal dust if necessary, ensuring the machine is unplugged.
  • Cable Inspection: Regularly inspect all welding cables, torch, and ground clamp for cuts, fraying, or loose connections. Replace damaged components immediately.
  • Gas System: Check gas hoses and connections for leaks. Ensure the gas regulator is functioning correctly.
  • Electrode and Nozzle: Replace worn or damaged TIG torch consumables (collets, nozzles, tungsten electrodes) as needed for optimal arc performance.
  • Storage: Store the machine in a clean, dry environment when not in use.

CAUTION: Always disconnect the machine from the power supply before performing any cleaning or maintenance.

7. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, contact customer support.

ProblemPossible CauseSolution
Machine does not power onNo power supply; loose power cable; internal fuse blown.Check power outlet and cable connection. Inspect power cable for damage. If fuse is suspected, contact service.
No welding arcPoor ground connection; incorrect welding mode; gas flow issue; worn tungsten electrode.Ensure ground clamp is securely attached to clean metal. Verify correct mode and settings. Check gas supply. Replace tungsten.
Poor weld quality (porosity, contamination)Insufficient shielding gas; gas leak; dirty workpiece; incorrect parameters.Check gas cylinder level and flow rate. Inspect gas lines for leaks. Clean workpiece thoroughly. Adjust welding parameters.
Overheating indicator activeExceeded duty cycle; blocked ventilation.Allow machine to cool down. Ensure adequate airflow around the machine and clear any obstructions from vents.

8. Specifications

Technical specifications for the ANDELI LCD Smart Tig-250P AC DC 250 A Welding Machine.

ParameterValue
ModelTIG250P AC DC
Material / Metal ProcessedCarbon steel, Stainless steel, aluminium, titanium
Rated Input Voltage220V
Rated Input Power7 KW
Output PolarityAC DC TIG
Pulse Current Range10-250A
Up-slope Time0.1-5s
Down-slope Time0.1-5s
Post Gas Time5-25s
Pulse Frequency50/60Hz
Base Current10-250A
Duty Cycle40%
AC Frequency Range50-150HZ
Clean Width Range25%-75%
Efficiency83%
FeatureINVERTER
Max. Load Power Capacity30 kVA
Rated Output Voltage220V
Welding Current/Voltage Range220V
ConditionNew
Place of OriginZhejiang, China
Warranty1 Year
Weight (kg)15
Welding Thickness (Aluminium)0.5-5mm
Welding Thickness (Cold)0.3-1mm
Welding Thickness (TIG)0.8-8mm
Key Selling PointsEasy to Operate

9. User Tips

  • For aluminum welding, ensure your tungsten electrode is properly prepared (balled tip for AC) and use pure argon shielding gas.
  • Experiment with the balance control (Clean Width) in AC TIG mode to find the optimal setting for your specific aluminum alloy and desired bead appearance. A higher cleaning action removes more oxides but can reduce penetration.
  • Utilize the pulse function for welding thinner materials or when precise heat control is critical to minimize distortion.
  • Always start with lower current settings and gradually increase until the desired penetration and bead profile are achieved.
  • Keep your consumables (tungsten, collets, nozzles) clean and replace them regularly to maintain arc stability and weld quality.

10. Warranty and Support

The ANDELI Tig-250P AC DC 250 A Welding Machine comes with a 1-year warranty. For technical support, warranty claims, or any questions regarding your product, please contact customer service using the information below.

Contact Information:

Contact information for customer service
Figure 5: Customer Service Contact Details.

You can reach customer service via:

  • WhatsApp: +86 16633953613
  • Telephone: +86 166 3395 3613
  • Email: 1428040867@qq.com

© 2023 ANDELI. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.