1. Introduction
The Lemorele R1100 Wireless HDMI Transmitter and Receiver Kit is a high-performance video transmission system designed for seamless, low-latency, and high-definition video streaming. It supports 1080P@60Hz HD video transmission over distances up to 200 meters (656 feet) with a latency of less than 50ms. This kit is ideal for various applications, including professional video production, live streaming, presentations, and multi-screen monitoring.
The system features an external 5DB high-gain Wi-Fi antenna for stable signal transmission and offers flexible power options via USB-C or NP-F batteries. One transmitter can connect to up to four receivers, providing versatile monitoring solutions. Additionally, the system supports app monitoring via the TuTuPlay application on Android and iOS devices.
Video: Overview of the Lemorele R1100 Wireless HDMI Kit features and applications.
2. Package Contents
Please check the package contents carefully upon unboxing. If any items are missing or damaged, please contact customer support.
- 1 x Wireless Transmitter (TX)
- 1 x Wireless Receiver (RX)
- 4 x External Antennas
- 1 x Cold Shoe Mount
- 1 x User Manual
- 2 x 100cm USB-C Cables

3. Product Overview
The Lemorele R1100 kit consists of a Transmitter (TX) and a Receiver (RX) unit. Both units are designed for robust performance and ease of use.
3.1 Transmitter (TX) Unit

- 1. Support Battery: Slot for NP-F series batteries (F970/F750/F550) for portable power.
- 2. USB-C Chargers: USB-C port for 5V/2A power input.
- 3. HDMI Output: HDMI port for local monitoring (loop out).
- 4. HDMI Input: HDMI port to connect to the video source.
- 5. LCD Display: Shows status information (battery, signal, channel).
- 6. Threaded Hole: 1/4-inch threaded hole for mounting accessories like cold shoe.
- 7. Power Button: On/Off switch.
- 8. Pairing Button: Used for pairing with receivers.
3.2 Receiver (RX) Unit

- 1. Support Battery: Slot for NP-F series batteries (F970/F750/F550) for portable power.
- 2. USB-C Chargers: USB-C port for 5V/2A power input.
- 3. HDMI Output: HDMI port to connect to a display device (monitor, projector, TV).
- 4. LCD Display: Shows status information (battery, signal, channel).
- 5. Threaded Hole: 1/4-inch threaded hole for mounting accessories.
- 6. Power Button: On/Off switch.
- 7. Pairing Button: Used for pairing with transmitters.
4. Setup Instructions
Follow these steps to set up your Lemorele R1100 Wireless HDMI Kit:
- Attach Antennas: Screw the four external antennas onto the designated ports on both the Transmitter (TX) and Receiver (RX) units. Ensure they are securely fastened.
- Mounting (Optional): If needed, attach the cold shoe mount to the 1/4-inch threaded hole on the TX or RX unit for camera or rig mounting.
- Power the TX Unit:
- USB-C Power: Connect one end of the provided USB-C cable to the USB-C port on the TX unit and the other end to a 5V/2A power adapter (not included).
- NP-F Battery: Insert a compatible NP-F battery (F970/F750/F550, not included) into the battery slot on the TX unit.
- Connect TX to Source: Connect an HDMI cable from your video source (e.g., camera, laptop, PC) to the HDMI Input port on the TX unit. If you need local monitoring, connect another HDMI cable from the HDMI Output port on the TX unit to a local monitor.
- Power the RX Unit:
- USB-C Power: Connect the second provided USB-C cable to the USB-C port on the RX unit and the other end to a 5V/2A power adapter (not included).
- NP-F Battery: Insert a compatible NP-F battery (F970/F750/F550, not included) into the battery slot on the RX unit.
- Connect RX to Display: Connect an HDMI cable from the HDMI Output port on the RX unit to your display device (e.g., monitor, projector, TV).
- Power On: Press the Power Button on both the TX and RX units to turn them on.
- Automatic Connection: The units should automatically connect within 5-10 seconds. The LCD display will show connection status. If they do not connect automatically, proceed to the 'Pairing Instructions' below.

5. Operating Instructions
5.1 Basic Operation
Once the TX and RX units are powered on and connected, the video from your source device will be wirelessly transmitted to your display device. The system operates with a low latency of less than 50ms, ensuring real-time video monitoring.
5.2 Pairing Instructions (for separately purchased RX units or re-pairing)
If your RX unit was purchased separately or if the units fail to connect automatically, manual pairing may be required:
- Ensure both TX and RX units are powered on.
- Press and hold the Pairing Button on both the TX and RX units simultaneously for a few seconds until the LCD display indicates pairing mode.
- The units will attempt to find each other and establish a connection. Once paired, the LCD display will show a stable connection status.
5.3 Channel Selection
The system utilizes 5GHz Wi-Fi with a 5DB gain external antenna for stable transmission. In environments with high interference, the system can automatically switch channels. If you experience signal issues, you may manually adjust channels if the option is available on the device interface or via the TuTuPlay app.

6. Multi-Receiver Setup
The Lemorele R1100 system supports connecting one transmitter to multiple receivers, allowing for flexible monitoring solutions. Up to four receivers can be connected to a single transmitter.
- 1 TX to 1 RX: Up to 200 meters (656 feet) wireless transmission distance.
- 1 TX to 2 RX: Up to 130 meters wireless transmission distance.
- 1 TX to 3 RX: Up to 100 meters wireless transmission distance.
- 1 TX to 4 RX: Up to 100 meters wireless transmission distance.

7. App Monitoring (TuTuPlay)
The Lemorele R1100 system offers app monitoring capabilities through the TuTuPlay application, available for both Android and iOS devices. This allows you to monitor the video feed directly on your smartphone or tablet.
- Download the TuTuPlay app from your device's app store.
- Connect your smartphone or tablet to the same Wi-Fi network as the Lemorele R1100 system.
- Open the TuTuPlay app and follow the on-screen instructions to connect to the transmitter.
- Note that when using app monitoring, the transmission range may be limited to approximately 20 meters (65 feet).

8. Power Supply
The Lemorele R1100 units can be powered by two methods:
- USB-C Power: Use a 5V/2A USB-C power adapter (not included) with the provided USB-C cables.
- NP-F Battery: Compatible with NP-F series batteries (F970/F750/F550, not included).
Important: To ensure optimal performance, always use a 5V/2A power supply. Insufficient power can lead to issues such as unsuccessful screen casting, connection lags, sudden disconnections, or the display interface not showing SSD and password information.
Note: The product does not support charging the NP-F battery. An external charger is required for NP-F batteries.

9. Maintenance
To ensure the longevity and optimal performance of your Lemorele R1100 Wireless HDMI Kit, follow these maintenance guidelines:
- Keep Dry: Avoid exposing the units to moisture or liquids.
- Clean Gently: Use a soft, dry cloth to clean the exterior of the units. Do not use harsh chemicals or abrasive materials.
- Proper Ventilation: Ensure the units have adequate airflow to prevent overheating, especially during extended use. The design incorporates efficient cooling for stable wireless transmission.
- Store Properly: When not in use, store the units in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handle with Care: Avoid dropping or subjecting the units to strong impacts.

10. Troubleshooting
If you encounter issues with your Lemorele R1100 kit, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No signal/Unsuccessful screen casting | Insufficient power supply Units not paired Incorrect HDMI connection | Ensure a 5V/2A power supply is used for both units. Perform manual pairing as described in Section 5.2. Check HDMI cables and ensure they are securely connected to the correct input/output ports. |
| Connection lags or sudden disconnection | Insufficient power supply Excessive distance or obstacles Signal interference | Verify 5V/2A power supply. Reduce the distance between TX and RX units and ensure a clear line of sight. Try switching to a different Wi-Fi channel (if available) or move away from other wireless devices. |
| Display interface does not show SSD/password | Insufficient power supply | Confirm both units are receiving stable 5V/2A power. |
| Video quality is poor or flickering | Weak signal Interference | Ensure units are within optimal range and line of sight. Check for sources of interference and try changing channels. |
11. Specifications
| Feature | Specification |
|---|---|
| Brand | Lemorele |
| Model | R1100 |
| Connectivity Technology | Wireless (HDMI) |
| Resolution | 1080P@60HZ |
| Latency | <50ms (0.05s) |
| Transmission Range (LoS) | Up to 200m (656ft) for 1 TX to 1 RX |
| Antenna | External 5DB High Gain Wi-Fi Antenna |
| Multi-Receiver Support | 1 TX to up to 4 RX |
| App Monitoring | TuTuPlay (Android/iOS) |
| Power Input | USB-C (5V/2A) or NP-F Battery (F970/F750/F550) |
| Color | Black |
| Material | ABS |
| Certification | CE, RoHS |
| Package Dimensions | 22cm (L) x 18cm (W) x 6cm (H) |
| Package Weight | 0.52 kg |
12. User Tips
- Video Switcher Compatibility: The Lemorele R1100 is compatible with video switchers, making it suitable for professional video production and live event setups.
- Expand Your Monitoring: You can expand your monitoring capabilities by adding up to three additional receivers to your existing transmitter, allowing for simultaneous viewing on multiple screens.
- Stable Power is Key: Always ensure both the transmitter and receiver units are powered by a stable 5V/2A source to prevent common issues like connection drops or poor performance.
- App for On-the-Go Monitoring: Utilize the TuTuPlay app on your smartphone or tablet for convenient, portable monitoring, especially useful for quick checks or when a dedicated monitor isn't available.
13. Warranty and Support
Lemorele provides comprehensive support for your R1100 Wireless HDMI Transmitter and Receiver Kit:
- Warranty: Enjoy a 1-year warranty from the date of purchase.
- Technical Support: Lifetime technical support is available for all users.
- Customer Service: For any inquiries or assistance, please contact our customer support team via email at support@lemorele.com. We aim to respond to all emails within 24 business hours.
