1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NICECNC GPS Mount Bracket Mini Fairing Kit. Please read thoroughly before installation and use to ensure proper function and safety.
2. Safety Warnings
- This product is only compatible with specified motorcycle models. Installation on non-compatible vehicles may cause improper fitment, functional failure, or safety hazards.
- Not compatible with any other models. Forced installation may lead to accidents.
- Installation must be performed by a qualified motorcycle technician.
- A torque wrench must be used during installation.
- Inspect the part before every ride. Discontinue use immediately if looseness, deformation, or cracks are detected.
- This is a non-OEM (aftermarket) part. Its performance may differ from original equipment—please carefully assess your intended usage scenario.
- Do not weld, drill, grind, or otherwise modify this product.
3. Product Features
- Mounts directly to handlebars, compatible with standard 22mm (7/8") or 28mm (1-1/8") fat bars.
- Provides some weather protection.
- Offers versatile mounting options for your GPS device.
- AMPS bolt pattern allows for horizontal or vertical GPS installation.
- Adjustable panel for placing the GPS in a higher position, providing an optimal perspective and reducing visual fatigue during long rides.
- Pre-drilled holes for electrical accessories:
- 1x 29mm USB charging hole
- 1x For KTM EXC power switch hole
- 2x 14mm indicator light holes
- 2x 11mm waterproof switch holes
- Adjustable mini fairing can be tilted to different angles based on rider preference and riding conditions.
- Three installation levels to raise or lower the bracket by loosening lock bolts.
- Added lateral sliding rails for the mount bracket, allowing installation on models with a handlebar clamp outer spacing of 105-116mm.
4. Specifications
| Attribute | Detail |
|---|---|
| Brand | NICECNC |
| Model | BOFKG6837S |
| Material | 5052/6061 Aluminum |
| Surface Treatment | Anodization |
| Processing | CNC-machined |
| Fairing Dimensions | Width: 29cm (11.4"), Height: 21cm (8.3") |
| Overall Height (Side) | 24cm (9.4") |
| Bracket Dimensions | Width: 173mm (6.8"), Height: 165mm (6.5") |
| Handlebar Compatibility | Standard 22mm (7/8") or 28mm (1-1/8") fat bars |
| Handlebar Clamp Spacing | 105-116mm (outer spacing) |
| Pre-drilled Holes | 1x 29mm USB Charging Hole, 1x KTM EXC Power Switch Hole, 2x 14mm Indicator Light Holes, 2x 11mm Waterproof Switch Holes |
Compatible Motorcycle Models (Reference Only):
- For KTM 125-530 SX/SX-F/EXC/EXC TPI/EXC-F/XC/XC-F/XC-W/XC-W TPI/XCF-W 2004-2024
- For KTM 690 Enduro/Enduro R/SMC/SMCR 2008-2024
- For Husaberg FE/TE 125-501 2009-2014
- For Husqvarna TC/TE/FC/FE/TX/FX 125-501 2014-2024
- For Husqvarna 701 Enduro/Supermoto 2016-2024
- For Honda XR650L 1993-2024
- For Beta 125-430 RR 2015-2024
- For GasGas EX / EC / MC 125-300 2021-2024
- For GasGas EX F/ EC F/ MC F 250-450 2021-2024
- For GasGas 700 SM/ES 2022-2024
- For Honda CR CRF CRFX 125 250 450
- For Yamaha YZ YZF WRF 125 250 450
- For Suzuki RMZ RMZ RMX DRZ 250 400 450
- For Kawasaki KX KXF125 250 450
- For Sherco SE 125 R 2018-2021
- For Sherco SE 125 R Factory 2021-2024
- For Sherco SE 250 R 2015-2023
- For Sherco SE 250 R Factory 2015-2024
- For Sherco SE 300 R 2015-2023
- For Sherco SE 300 R Factory 2015-2024
- For Sherco SE-F 250 R 2015-2021
- For Sherco SE-F 250 R Factory 2015-2024
- For Sherco SE-F 300 R 2015-2023
- For Sherco SE-F 300 R Factory 2015-2024
- For Sherco SE-F 450 R 2015-2021
- For Sherco SE-F 450 R Factory 2016-2024
- For Sherco SE-F 450 R 2019-2021
- For Sherco SE-F 450 R Factory 2019-2024
5. Package Contents
The package includes:
- 1x GPS Mount Bracket Mini Fairing Kit
Note: Electrical accessories such as ACC ignition switch, turn signal indicator, waterproof push button switch, and USB charging port are not included in the package.
6. Setup and Installation
6.1 Pre-Installation Check
This is a universal part. Please check the size of your motorcycle's handlebars and ensure that all components are suitable before purchase. We cannot guarantee suitability without modification, as it depends on the user to ensure correct application.
6.2 Tools Required
A torque wrench is required for proper installation.
6.3 Installation Steps
- Park the motorcycle on a level surface and engage the main stand.
- Use appropriate tools to remove any original OEM components that interfere with the installation.
- Align the new part with the mounting holes and insert the included fasteners.
- Tighten all bolts using a torque wrench to the specified torque value.
Important Note: Never tighten by hand feel! Over-torquing can strip threads; under-torquing may cause the part to detach during riding.
6.4 Post-Installation Check
After installation, manually apply pressure to test stability. Ensure there is no unusual noise, play, or movement.
6.5 Visual Guides
6.6 Installation Video
7. Operating Instructions
7.1 Adjusting the Mini Fairing
The mini fairing can be adjusted or tilted to different angles to suit the rider's preference and current riding conditions. This adjustment also contributes to wind and rain protection.
7.2 Adjusting the Raised Panel
The adjustable panel allows you to position your GPS device higher for a perfect perspective. This feature helps reduce visual fatigue during long cycling trips, whether you are seated or standing.
7.3 Adjusting Installation Levels
The bracket offers three installation levels. To raise or lower the bracket, simply loosen the lock bolts, adjust to the desired level, and then re-tighten the bolts securely.
8. Maintenance Recommendations
- Check fastener tightness every 500 kilometers or once per month.
- Clean with water or a neutral detergent. Avoid strong acids or alkalis, which may cause corrosion.
- If used in off-road, muddy, or salt-spray environments, increase inspection frequency.
9. Troubleshooting
If you encounter any issues during installation or operation, first re-check all connections and adjustments. Ensure all bolts are tightened to the specified torque as per the installation instructions. If problems persist, consult a qualified motorcycle technician.
10. User Tips
- Always double-check the handlebar diameter (22mm or 28mm) before purchasing to ensure compatibility with your motorcycle.
- Remember that electrical accessories like USB chargers or switches are not included and need to be purchased separately to utilize the pre-drilled holes.
- For optimal visibility, experiment with the adjustable panel and fairing angles to find the best setup for your riding posture and conditions.
11. Disposal
At the end of its service life, dispose of this product as metal waste through local recycling or authorized waste collection facilities. Do not discard improperly.
12. Disclaimer
The manufacturer and EU Authorized Representative shall not be held liable for any damage, injury, or accident resulting from:
- Incorrect or unqualified installation
- Use beyond the intended scope (e.g., on public roads without E-mark certification)
- Unauthorized modifications
- Failure to inspect or maintain the product as instructed
This manual may be updated without prior notice. Please refer to the latest version for current information.
13. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase records for reference.
A PDF version of the item guides and documents is available for reference: User manual (PDF)