1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Hikvision DS-2CD1083G2-LIU 8MP Smart Hybrid Light Fixed Bullet Network Camera. This advanced security camera features 8MP high-quality imaging, human and vehicle detection, Smart Hybrid Light technology for versatile illumination, efficient H.265+ compression, a built-in microphone for audio security, and an IP67 rating for water and dust resistance. Please read this manual thoroughly before using the product.
2. Safety Information
⚠ Disclaimer:
Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your vendor.
- Hikvision DS-2CD1083G2-LIU Network Camera
- Mounting Accessories (screws, wall plugs)
- Quick Start Guide / Documentation
4. Product Overview
The Hikvision DS-2CD1083G2-LIU is a robust bullet-style network camera designed for both indoor and outdoor surveillance. It integrates advanced features for reliable security monitoring.
5. Setup
5.1 Physical Installation
- Choose a Mounting Location: Select a location that provides the desired field of view and is within reach of power and network cables. Ensure the surface is strong enough to support the camera.
- Mounting the Camera: Use the provided mounting accessories to securely attach the camera to a wall or ceiling. Drill pilot holes if necessary.
- Adjust Angle: Loosen the adjustment screws to pan, tilt, and rotate the camera to the desired surveillance angle. Tighten the screws to secure the position.
5.2 Power and Network Connection
The camera supports Power over Ethernet (PoE) for simplified installation, allowing both power and data to be transmitted over a single Ethernet cable. Alternatively, it can be powered via a 12 VDC power adapter.
- Ethernet Connection: Connect an Ethernet cable from your network switch (preferably PoE-enabled) to the camera's RJ45 port.
- Power Connection (if not using PoE): Connect a 12 VDC power adapter (not included) to the camera's power input. Ensure the power supply meets the camera's specifications (12 VDC ± 25%, 0.41 A, max. 5 W).
5.3 Initial Access and Configuration
After physical installation and connection, you can access and configure the camera via a web browser or client software.
- Find the Camera's IP Address: Use the Hikvision SADP tool or your network's DHCP server to find the camera's IP address.
- Access via Web Browser: Open a web browser (e.g., Chrome 57.0+, Firefox 52.0+, Edge 89+) and enter the camera's IP address. Follow the on-screen prompts to set up a strong password and configure basic settings.
- Client Software: For advanced management, install Hikvision's iVMS-4200 client software on your PC or Hik-Connect app on your mobile device (Android, iOS).
6. Operating Instructions
6.1 Video Configuration
- Resolution: Configure the main stream up to 3840 × 2160 (8MP) at 12.5/15 fps. Sub-stream supports up to 1280 × 720.
- Video Compression: Utilize H.265+/H.265/H.264+/H.264 for main stream and H.265/H.264/MJPEG for sub-stream to optimize storage and bandwidth.
- Region of Interest (ROI): Define a fixed region to enhance image quality in specific areas while saving bandwidth elsewhere.
- Scalable Video Coding (SVC): Supports H.264 and H.265 encoding for flexible video streaming.
6.2 Audio Configuration
The camera features a built-in microphone for real-time audio security.
- Environment Noise Filtering: Enable this feature to reduce background noise for clearer audio.
- Audio Compression: Supports G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/AAC-LC.
6.3 Smart Features
- Human and Vehicle Detection: Configure motion detection to specifically trigger alarms for human and vehicle targets, reducing false alarms.
- Smart Hybrid Light: The camera can intelligently switch between IR and white light illumination based on detection events, providing both covert IR and full-color visible light when needed.
6.4 Image Settings
Adjust various image parameters to suit your environment and preferences.
- Wide Dynamic Range (WDR): 120 dB WDR compensates for extreme lighting conditions, ensuring clear images in both bright and dark areas.
- Image Enhancement: Features like BLC (Backlight Compensation), HLC (Highlight Compensation), and 3D DNR (Digital Noise Reduction) improve image clarity.
- Day/Night Switch: Set the camera to automatically switch between day (color) and night (B/W with IR) modes, or schedule specific times.
- Privacy Mask: Configure up to 4 programmable polygon privacy masks to block out sensitive areas from surveillance.
6.5 Network Management
- Simultaneous Live View: Up to 6 channels can be viewed simultaneously.
- User/Host Management: Supports up to 32 users with 3 levels: administrator, operator, and user.
- Protocols: Supports standard network protocols including TCP/IP, HTTP, RTSP, NTP, etc.
7. Maintenance
7.1 Cleaning
Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild detergent and a damp cloth, then wipe dry. Avoid abrasive cleaners or solvents.
7.2 Firmware Updates
Keep your camera's firmware updated to ensure optimal performance, security, and access to new features. Firmware updates are typically available on the Hikvision official website. Follow the instructions provided with the firmware update package carefully.
7.3 Storage
The camera supports on-board storage up to 512 GB via an SD card slot (SD card optional). Ensure the SD card is compatible and formatted correctly for reliable recording.
8. Troubleshooting
- No Image/Video: Check power supply and network connection. Verify IP address and camera status in client software.
- Poor Image Quality: Ensure the lens is clean. Adjust image settings (brightness, contrast, WDR). Check network bandwidth.
- Network Connection Issues: Verify Ethernet cable integrity. Check network settings (IP address, gateway, DNS). Ensure PoE switch is functioning correctly.
- Audio Problems: Check microphone settings in the camera's web interface. Ensure environment noise filtering is configured appropriately.
- Cannot Access Camera: Reset camera to factory defaults (refer to the full manual for specific steps, usually involves a reset button). Ensure correct login credentials.
9. Specifications
| Category | Feature | Specification |
|---|---|---|
| Camera | Image Sensor | 1/2.7" Progressive Scan CMOS |
| Max. Resolution | 3840 × 2160 | |
| Min. Illumination | Color: 0.01 Lux @ (F2.0, AGC ON), B/W: 0 Lux with IR | |
| Shutter Time | 1/3 s to 1/100,000 s | |
| Day & Night | IR cut filter | |
| Angle Adjustment | Pan: 0° to 360°, tilt: 0° to 90°, rotate: 0° to 360° | |
| Megapixels | 8MP | |
| Lens | Lens Type | Fixed focal lens, 2.8 and 4 mm optional |
| Focal Length & FOV | 2.8 mm: horizontal FOV 113°, vertical FOV 62°, diagonal FOV 134° 4 mm: horizontal FOV 90°, vertical FOV 49°, diagonal FOV 108° | |
| Lens Mount | M12 | |
| Aperture | F2.0 | |
| DORI | DORI (2.8 mm) | D: 79 m, O: 31 m, R: 15 m, I: 7 m |
| DORI (4 mm) | D: 102 m, O: 40 m, R: 20 m, I: 10 m | |
| Illuminator | Supplement Light Type | IR, White Light |
| Supplement Light Range | Up to 30 m | |
| Smart Supplement Light | Yes | |
| IR Wavelength | 850 nm | |
| Video | Main Stream (50 Hz) | 12.5 fps (3840 × 2160, 3200 × 1800, 2688 × 1520, 1920 × 1080, 1280 × 720) |
| Main Stream (60 Hz) | 15 fps (3840 × 2160, 3200 × 1800, 2688 × 1520, 1920 × 1080, 1280 × 720) | |
| Sub-Stream (50 Hz) | 12.5 fps (1280 × 720, 640 × 480, 640 × 360) | |
| Sub-Stream (60 Hz) | 15 fps (1280 × 720, 640 × 480, 640 × 360) | |
| Video Compression | Main stream: H.265+/H.265/H.264+/H.264 Sub-stream: H.265/H.264/MJPEG | |
| Video Bit Rate | 32 Kbps to 16 Mbps | |
| H.264/H.265 Type | Baseline Profile, Main Profile, High Profile (H.264); Main Profile (H.265) | |
| Region of Interest (ROI) | 1 fixed region for main stream | |
| Audio | Audio Type | Mono sound |
| Environment Noise Filtering | Yes | |
| Audio Sampling Rate | 8 kHz/16 kHz | |
| Audio Compression | G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/AAC-LC | |
| Audio Bit Rate | 64 Kbps (G.711ulaw/G.711alaw)/16 Kbps (G.722.1)/16 Kbps (G.726)/32 to 160 Kbps (MP2L2)/16 to 64 Kbps (AAC-LC) | |
| Network | Security | Password protection, complicated password, watermark, basic and digest authentication for HTTP, WSSE and digest authentication for Open Network Video Interface, security audit log, host authentication (MAC address) |
| Simultaneous Live View | Up to 6 channels | |
| API | Open Network Video Interface (Profile S, Profile T, Profile G (only -F model supports)), ISAPI, SDK | |
| Protocols | TCP/IP, ICMP, DHCP, DNS, HTTP, RTP, RTSP, NTP, IGMP, IPv6, UDP, QoS, FTP, SMTP, UPnP | |
| User/Host | Up to 32 users, 3 user levels: administrator, operator, and user | |
| Client | iVMS-4200, Hik-Connect | |
| Image | Wide Dynamic Range (WDR) | 120 dB |
| SNR | ≥ 52 dB | |
| Day/Night Switch | Day, Night, Auto, Schedule | |
| Image Enhancement | BLC, HLC, 3D DNR | |
| Image Settings | Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance, adjustable by client software or web browser | |
| Privacy Mask | 4 programmable polygon privacy masks | |
| Interface | Ethernet Interface | 1 RJ45 10 M/100 M self-adaptive Ethernet port |
| Built-in Microphone | Yes | |
| Event | Basic Event | Motion detection (support alarm triggering by specified target types (human and vehicle)), video tampering alarm, exception |
| Linkage | Upload to FTP/memory card (-F), send email, notify surveillance center, trigger recording (-F), trigger capture | |
| General | Power | 12 VDC ± 25%, 0.41 A, max. 5 W, Ø5.5 mm coaxial power plug, reverse polarity protection PoE: IEEE 802.3af, Class 3, max. 6.5 W |
| Material | Metal & Plastic | |
| Dimension | 170.8 mm × 66 mm × 69.1 mm (6.7" × 2.6" × 2.7") | |
| Package Dimension | 216 mm × 121 mm × 118 mm (8.5" × 4.8" × 4.6") | |
| Weight | Approx. 285 g (0.6 lb.) | |
| With Package Weight | Approx. 481 g (1.1 lb.) | |
| Storage Conditions | -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing) | |
| Startup and Operating Conditions | -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing) | |
| Language | English, Ukrainian | |
| General Function | Heartbeat, anti-banding, mirror, password protection, password reset via email | |
| Approval | EMC | CE-EMC: EN 55032:2015+A1:2020, EN 50130-4:2011+A1:2014, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:2019+A2:2021, RCM: AS/NZS CISPR 32: 2015, IC: ICES-003: Issue 7 |
| Safety | UL: UL 62368-1, CB: IEC 62368-1: 2014+A11, CE-LVD: EN 62368-1: 2014/A11: 2017, BIS: IS 13252 (Part 1): 2010/IEC 60950-1: 2005 | |
| Environment | CE-RoHS: 2011/65/EU, WEEE: 2012/19/EU, Reach: Regulation (EC) No 1907/2006 | |
| Protection | IP67: IEC 60529-2013 |
10. User Tips
- Strong Passwords: Always use strong, unique passwords for your camera and change them regularly to prevent unauthorized access.
- Network Security: Ensure your network is secure and consider isolating your security cameras on a separate VLAN if possible.
- Optimal Placement: Experiment with camera placement and angle adjustments to achieve the best coverage and minimize blind spots.
- Motion Detection Zones: Configure specific motion detection zones to focus on critical areas and reduce unnecessary alerts.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Hikvision website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
