1. Product Overview
The MCHOSE K7 Ultra is a high-performance tri-mode gaming mouse designed for competitive gaming and efficient office use. It features a PAW3950 sensor, an 8000 Hz polling rate, proprietary wireless technology, and an ultra-lightweight design. A unique magnetic wireless charging dock is included for convenient charging and also functions as an 8K receiver.


2. Package Contents
- 1x MCHOSE K7 Ultra Mouse
- 1x Magnetic Charging Dock
- 1x 8K Receiver
- 1x Charging/Data Cable (Type-C)
- 1x User Manual (this document)
- 1x Anti-slip Sticker
- 1x Mouse Storage Bag
3. Setup Guide
3.1 Initial Charging
- Connect the Magnetic Charging Dock to your computer using the provided Type-C Charging/Data Cable.
- Place the K7 Ultra mouse onto the magnetic charging dock. The mouse will magnetically align and begin charging. The RGB light ring on the dock will illuminate, indicating charging status.
- Allow the mouse to fully charge before first use for optimal battery life.

3.2 Connectivity Modes
The K7 Ultra supports three connectivity modes: Wired, 2.4G Wireless, and Bluetooth. Use the switch on the bottom of the mouse to select your desired mode.

3.2.1 2.4G Wireless Mode
- Ensure the 8K Receiver is plugged into a USB port on your computer.
- Switch the mouse to 2.4G mode using the switch on the bottom.
- The mouse should automatically connect. If not, press the pairing button (if available, refer to specific mouse diagram) or re-plug the receiver.
3.2.2 Wired Mode
- Connect the mouse directly to your computer using the provided Type-C Charging/Data Cable.
- The mouse will automatically switch to wired mode and function without needing the receiver. This mode also charges the mouse.
3.2.3 Bluetooth Mode
- Switch the mouse to Bluetooth mode using the switch on the bottom.
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select "MCHOSE K7 Ultra" from the list to pair.
3.3 M HUB Driver Installation
To unlock full customization options for DPI, polling rate, macros, and RGB lighting, download and install the M HUB driver software from the official MCHOSE website. The M HUB supports both web and app drivers.

4. Operating Instructions
4.1 Basic Functions
- Left Click: Primary action.
- Right Click: Secondary action/context menu.
- Scroll Wheel: Scroll up/down, middle click. The TTC Gold Wheel Encoder provides tactile precision.
- Side Buttons: Typically assigned for forward/backward navigation or customizable via M HUB.
- DPI Button: Cycle through preset DPI levels. Customizable via M HUB.
4.2 Advanced Features
- PAW3950 Sensor: Experience exceptional tracking precision with up to 42,000 DPI, 750 IPS tracking speed, and 50G acceleration.
- 8,000Hz Polling Rate: Achieve ultra-low input latency (0.125ms) in wired and 2.4G wireless modes for superior responsiveness.
- Omron Optical Switches: Enjoy crisp, reliable clicks with a 70-million-click lifespan and no double-click issues.
- Customizable RGB Lighting: The magnetic charging dock features a 360° RGB light ring. Customize effects and music reactivity using the M HUB driver.
5. Maintenance
5.1 Cleaning
- Use a soft, lint-free cloth to wipe the mouse surface.
- For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
- Avoid using harsh chemicals or abrasive materials that could damage the High-Performance Glass-Like Coating.
- Use compressed air to clean dust from crevices and around buttons.
5.2 Battery Care
- To prolong battery life, avoid fully discharging the mouse frequently.
- Charge the mouse regularly using the magnetic charging dock or the Type-C cable.
- Store the mouse in a cool, dry place when not in use for extended periods.
5.3 PTFE Glides
The 100% PTFE glides are designed for durability. If they become worn over time, replacement glides can be purchased from authorized MCHOSE retailers. Ensure the mouse surface is clean before applying new glides.
6. Troubleshooting
6.1 Mouse Not Responding
- Check Battery: Ensure the mouse is charged. Place it on the magnetic charging dock or connect via Type-C cable.
- Check Connectivity Mode: Verify the switch on the bottom of the mouse is set to the correct mode (2.4G, Bluetooth, or Wired).
- 2.4G Wireless: Ensure the 8K Receiver is securely plugged into a working USB port. Try a different USB port.
- Bluetooth: Re-pair the mouse via your device's Bluetooth settings.
- Wired: Ensure the Type-C cable is securely connected to both the mouse and the computer. Try a different USB port or cable.
6.2 Lag or Disconnections in Wireless Mode
- Interference: Move the 8K Receiver closer to the mouse. Avoid placing the receiver near other wireless devices (Wi-Fi routers, cordless phones) that might cause interference.
- USB Port: Try plugging the receiver into a different USB port, preferably a USB 2.0 port if available, as some USB 3.0 ports can cause interference.
- Polling Rate: While 8000Hz offers the lowest latency, some systems or games might perform better at lower polling rates (e.g., 1000Hz). Adjust this in the M HUB driver.
6.3 M HUB Software Issues
- Software Not Detecting Mouse: Ensure the mouse is connected via 2.4G wireless (with receiver) or wired mode. Bluetooth mode might have limited functionality with the driver.
- Update Software: Check the official MCHOSE website for the latest version of the M HUB driver.
- Reinstall Driver: If issues persist, try uninstalling and reinstalling the M HUB software.
6.4 Optical Switches vs. Mechanical Switches
The MCHOSE K7 Ultra is equipped with Omron Optical Switches. If you encounter information suggesting mechanical switches, please note that the K7 Ultra model specifically uses optical switches for enhanced durability and zero double-click issues. Any variations in switch type would typically be specified for different product models or versions.
7. Specifications
| Feature | Specification |
|---|---|
| Model | K7 Ultra |
| Size | 127.3 × 63.6 × 39.9 mm (Medium to Large Hand) |
| Polling Rate | Wired 8K + Wireless 8K |
| Main Key Micro Switch | Omron Optical Micro Switch (70 Million Cycles) |
| Sensor | PAW 3950 |
| DPI | 42,000 DPI |
| Acceleration | 50 G |
| Chipset | Realtek Chipset |
| Transmission Technology | TOPSPEED Wireless Technology |
| Surface Coating | High-Performance Glass-Like Coating |
| Drivers | Self-developed M HUB (Web Driver / App Driver) |
| Weight | 59g (±2g) |
| Battery | 500mAh |
| Scroll Wheel | TTC Gold Wheel Encoder |
| Connectivity | Tri-mode (Type-C Cable / 2.4G Hz / Wireless) |
| Receiver / Charging | 8K Receiver & Magnetic Wireless Charging Dock (2-in-1) |

8. Warranty and Support
MCHOSE products are designed for quality and performance. For warranty information, please refer to the warranty card included in your product packaging or visit the official MCHOSE website. For technical support, driver downloads, and FAQs, please visit the MCHOSE support page.
9. User Tips
- Wired Mode for Stability: If you experience any wireless interference or need the most stable connection, using the mouse in wired mode with the Type-C cable is always an option.
- Customize with M HUB: Take advantage of the M HUB software to fine-tune DPI settings, button assignments, and RGB lighting to match your personal preferences and gaming style.
- Optimal Polling Rate: While 8000Hz offers peak performance, experiment with 1000Hz if you encounter any compatibility issues or unusual behavior with specific games or applications.