OBD2 Scanner K310

Contents

K310 OBD2 Scanner User Manual

Model: K310

1. Introduction

The K310 Upgraded OBD2 Scanner is an automotive engine fault code reader and diagnostic scanning tool designed for vehicles supporting the OBD II protocol since 1996. This device provides essential diagnostic functions to help identify and resolve engine-related issues efficiently. It features a user-friendly interface, multi-language support, and a robust design for reliable performance.

K310 OBD2 Scanner with features listed on box
Figure 1: K310 OBD2 Scanner with key features

2. Key Features

  • Full OBDII Modes: Supports all 10 OBDII diagnostic modes.
  • Live Data Stream: Displays real-time sensor data from the vehicle's engine.
  • I/M Readiness: Checks the status of emission-related monitors.
  • Read & Erase Codes: Retrieves and clears Diagnostic Trouble Codes (DTCs).
  • VIN Check: Retrieves Vehicle Identification Number (VIN) and other vehicle information.
  • Faster Processing Chip: Ensures quick and efficient diagnostic operations.
  • Multi-Language Support: Includes English, French, Spanish, Italian, Russian, German, Portuguese, Japanese, and Chinese.
  • Wide Vehicle Compatibility: Supports most gasoline vehicles manufactured since 1996.
  • Transmission Temperature Check: Capable of monitoring transmission temperature.
K310 scanner showing various diagnostic functions
Figure 2: K310 Scanner displaying diagnostic functions

3. Specifications

AttributeValue
ModelK310
Communication InterfaceOBD-II
Item TypeCode Readers & Scan Tools
CertificationCE
OriginMainland China
Dimensions (H x W x T)155mm (6.1 inch) x 85mm (3.3 inch) x 25mm (0.9 inch)
Weight0.293 kg
Working Voltage≤36V
ConnectivityUSB (non-wireless)
K310 OBD2 Scanner dimensions
Figure 3: K310 OBD2 Scanner dimensions

4. Package Contents

The K310 OBD2 Scanner package typically includes:

  • 1 x K310 OBD2 Scanner Unit with integrated OBDII cable

5. Setup Instructions

Follow these steps to connect and power on your K310 OBD2 Scanner:

  1. Locate the OBDII Port: The vehicle's OBDII port is generally located at five positions below the dashboard of the car driver's seat. Some models may require you to open a cover or pull it out to see it. Refer to your vehicle's manual for the exact location.
  2. Connect the Scanner: Insert the K310 scanner's OBDII connector firmly into the vehicle's OBDII port.
  3. Power On the Vehicle: Turn the vehicle's ignition key to the 'ON' position (engine off) or start the car. The scanner will automatically power on and begin linking to the vehicle.
Steps for connecting the K310 OBD2 scanner to a vehicle's OBDII port
Figure 4: Connection steps and OBDII port location

Video 1: K310 OBDII Scanner connection and basic operation demonstration.

6. Operating Instructions

Once connected and powered on, navigate the scanner using the directional buttons and 'OK' button.

6.1 Main Menu Overview

The main menu typically presents four primary options:

  • OBD: For standard OBDII diagnostic functions.
  • Monitor: For checking various system monitors.
  • List: To view stored data or information.
  • Settings: To configure device preferences.

6.2 Diagnostic Functions

From the 'Diagnostic Menu' (accessed via the OBD option), you can perform the following:

  • Read Codes: Select 'Read Codes' to retrieve current, pending, and permanent Diagnostic Trouble Codes (DTCs) from the vehicle's engine control unit (ECU).
  • Erase Codes: Select 'Erase Codes' to clear all stored DTCs and turn off the Check Engine Light (CEL). Ensure the underlying issue is resolved before clearing codes.
  • View Freeze Frame: Select 'View Freeze Frame' to see a snapshot of sensor data recorded by the ECU when an emission-related fault occurred.
  • I/M Readiness: Select 'I/M Readiness' to check the status of the vehicle's various emission monitoring systems (e.g., O2 Sensor Monitor, Fuel System Monitor). This is crucial for emission testing.
  • Vehicle Info: Select 'Vehicle Info' to display the Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).
  • Data Stream: Select 'Data Stream' to view live sensor data in text format, such as engine RPM, vehicle speed, coolant temperature, and fuel system status.
  • RealTime Curve: Select 'RealTime Curve' to view live sensor data graphically, allowing for easier analysis of parameters like car speed, calculated load value, engine coolant temperature, and engine RPM.
K310 scanner displaying DTC Lookup, RealTime Curve, and I/M Readiness screens
Figure 5: Example screens for DTC Lookup, RealTime Curve, and I/M Readiness

6.3 System Setup

From the 'System Setup' menu, you can adjust:

  • Language: Change the display language.
  • Unit of Measure: Switch between metric and imperial units.
  • Contrast: Adjust screen contrast for better visibility.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the scanner's casing and screen. Avoid abrasive cleaners or solvents.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Do not pull on the cable to disconnect the scanner. Always grasp the connector firmly.

8. Troubleshooting

  • Scanner does not power on: Ensure the OBDII connector is securely plugged into the vehicle's port and the vehicle's ignition is in the 'ON' position or the engine is running.
  • "Linking to Vehicle" message persists: Verify the connection. Some vehicles may take a moment longer to establish communication. Ensure your vehicle is OBDII compliant.
  • "No codes are stored in the module" or "No freeze frame data stored": This indicates that there are currently no active or stored Diagnostic Trouble Codes or freeze frame data in the vehicle's ECU.
  • Inaccurate readings: Ensure the vehicle's battery is adequately charged. Low voltage can affect diagnostic accuracy.

9. User Tips

  • Always ensure the vehicle's ignition is on (or engine running for some tests) when connecting the scanner to ensure proper communication.
  • Consult your vehicle's service manual for specific OBDII port locations or diagnostic procedures relevant to your car model.
  • Clearing codes will turn off the Check Engine Light but will not fix the underlying problem. Always address the root cause of the fault code.
  • For intermittent issues, use the 'RealTime Curve' or 'Data Stream' functions to monitor parameters when the problem occurs.

10. Warranty and Support

This product is covered by a 90-day free return policy. In case of product issues such as damage or non-delivery within 30 days, a refund or coupon code may be provided. For further assistance or inquiries, please contact customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.