SPACE SC-3

Contents

SPACE 3x12L Commercial Slushie Machine

Model: SC-3 - Instruction Manual

1. Introduction

Thank you for choosing the SPACE 3x12L Commercial Slushie Machine (Model SC-3). This machine is designed for commercial use, capable of dispensing a variety of frozen beverages such as granita drinks, frozen cocktails, fruit juices, smoothies, coffees, cappuccinos, and tea slush beverages. It can also function as a cold drink or fruit juice dispenser. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new slushie machine.

Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.

2. Specifications

Attribute Value
Model Number SC-3
Capacity 3 x 12 Liters (Total 36 Liters)
Power (W) 900W
Voltage 220V/50-60Hz, 110V/60Hz
Dimension (L*W*H) 545mm x 475mm x 700mm
Net Weight (N.W.) 55kg
Gross Weight (G.W.) 59kg
Refrigerant R404a, R134a
Drive Mode Magnetic transmission
Compressor Embraco
Material Stainless steel
Certification CE, ISO9001
Origin Mainland China, Zhejiang

Key Features:

  • Magnetic forced transmission system.
  • Separately controlled tanks for individual flavor management.
  • Versatile for granita, frozen cocktails, fruit juices, smoothies, coffees, cappuccinos, and tea slush.
  • Can also be used as a cold drink or fruit juice dispenser.
  • Double-sided high-efficiency evaporator cylinder for rapid refrigeration.
  • Dual beater mixing system (inside and outside of evaporator cylinder) for consistent texture.
  • Equipped with an imported high-quality Embraco compressor for efficient freezing even in hot climates.
  • Tanks made of food-grade PC (Polycarbonate) material, resistant to high/low temperatures, easy to remove and clean.
  • Low noise operation and efficient air cooling.

3. Setup Instructions

  1. Unpacking and Inspection:

    Carefully remove the machine from its packaging. Inspect for any shipping damage. Ensure all components are present, including the main unit, three clear bowls, lids, agitators, and drip trays.

    SPACE 3x12L Commercial Slushie Machine with three clear bowls filled with colorful slush.

    Figure 1: Front view of the SPACE 3x12L Commercial Slushie Machine.

  2. Placement:

    Place the machine on a stable, level surface. Ensure adequate clearance around the machine (at least 15 cm or 6 inches) for proper air circulation, especially around the ventilation grilles on the sides and back. This is crucial for efficient air cooling and compressor performance.

    Rear view of the SPACE 3x12L Commercial Slushie Machine showing power switches and ventilation.

    Figure 2: Rear view of the machine, highlighting ventilation grilles.

  3. Initial Cleaning:

    Before first use, thoroughly clean all parts that will come into contact with beverages. This includes the clear bowls, lids, agitators, and dispensing spouts. Use mild soap and warm water, then rinse thoroughly and dry. Ensure all parts are completely dry before reassembly.

  4. Assembly:

    Assemble the agitators inside each bowl. Place the bowls securely onto the machine base. Ensure the dispensing levers are correctly attached and functional. Attach the drip trays below each dispensing spout.

    Detailed view of the internal components and dispensing mechanism of the slushie machine.

    Figure 3: Internal mixing system and dispensing spouts.

    Dual beater mixing system inside the slushie machine's evaporator cylinder.

    Figure 4: Dual beater mixing system.

  5. Power Connection:

    Connect the machine to a grounded power outlet with the correct voltage (220V or 110V, depending on your model). Refer to the machine's label for specific power requirements.

4. Operating Instructions

  1. Filling the Bowls:

    Prepare your slushie mix according to the recipe or concentrate instructions. Pour the liquid into each of the three 12-liter bowls, ensuring not to exceed the 'MAX' fill line. The machine features independent control for each tank, allowing for different flavors.

    Side view of the three clear bowls of the SPACE 3x12L Commercial Slushie Machine.

    Figure 5: Side view of bowls, showing liquid levels.

  2. Powering On:

    Turn on the main power switch located on the machine. Then, activate the individual control switches for each bowl you wish to operate. The digital display will show the current temperature or setting.

    Video 1: Demonstration of machine setup, filling, and operation.

  3. Setting Consistency:

    Use the control panel to adjust the freezing consistency for each bowl. The machine will begin the freezing process, and the dual beater mixing system will continuously stir the liquid to create a smooth slush texture.

    SPACE 3x12L Commercial Slushie Machine with slush forming in all three bowls.

    Figure 6: Slush forming in the machine's bowls.

  4. Dispensing:

    Once the desired slush consistency is reached, place a cup under the dispensing spout and pull the corresponding lever down to dispense the slushie. Release the lever to stop the flow.

    Close-up of the dispensing levers and spouts on the SPACE 3x12L Commercial Slushie Machine.

    Figure 7: Close-up of dispensing levers.

5. Maintenance

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your slushie machine.

  1. Daily Cleaning:
    • Empty any remaining beverage from the bowls.
    • Remove the lids, bowls, agitators, and dispensing spouts.
    • Wash all removable parts with warm, soapy water. Use a soft brush to clean hard-to-reach areas.
    • Rinse thoroughly with clean water and allow to air dry completely before reassembling.
    • Wipe down the exterior of the machine with a damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
  2. Condenser Cleaning (Monthly/Bi-monthly):

    The condenser fins can accumulate dust and debris, affecting cooling efficiency. Unplug the machine and carefully clean the condenser fins using a soft brush or vacuum cleaner. Ensure the ventilation grilles are always clear.

  3. Seal Inspection:

    Periodically inspect the seals around the bowls and dispensing spouts for wear or damage. Replace any worn seals to prevent leaks.

6. Troubleshooting

Problem Possible Cause Solution
Machine not freezing Insufficient power supply, incorrect temperature setting, low refrigerant, blocked air vents. Check power connection and voltage. Adjust temperature settings. Ensure air vents are clear. If refrigerant is suspected, contact qualified service personnel.
Leaking from bowls/spouts Improper assembly of bowls/spouts, worn seals. Reassemble bowls and spouts correctly. Inspect and replace worn seals.
Unusual noise during operation Loose components, motor issue, foreign object. Turn off and unplug the machine. Check for any loose parts or foreign objects. If the noise persists, contact technical support.
Slush is too thin or too thick Incorrect consistency setting, improper mix ratio. Adjust the consistency setting on the control panel. Ensure the beverage mix ratio is correct according to the concentrate instructions.

7. User Tips

  • Pre-chill your mix: For faster slush production, pre-chill your beverage mix in a refrigerator before adding it to the machine bowls.
  • Proper Mix Ratio: Always follow the manufacturer's recommended mix ratio for concentrates. An incorrect ratio can affect freezing performance and machine longevity.
  • Regular Cleaning: Adhere to the daily cleaning schedule to prevent sugar buildup and ensure hygienic operation.
  • Monitor Airflow: Periodically check that the machine's air vents are not obstructed to maintain optimal cooling and prevent overheating.

8. Warranty and Support

The SPACE 3x12L Commercial Slushie Machine comes with a 1-year warranty on the entire machine, including core components such as the gearbox and compressor.

After Warranty Service:

  • Video technical support is available.
  • Spare parts can be provided.

For warranty claims, technical assistance, or to order spare parts, please contact your supplier or the manufacturer directly. Ensure you have your model number (SC-3) and purchase date available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.